Introduction to the role of brushing the wall and fixing tiles when decorating

Renovating a new home is not an easy task, it looks simple, but there are actually a lot of things in it. When decorating, the master brushes a layer of glue before scraping putty. What's that?

What is the purpose of painting the wall? That's called wall solid, what are the benefits of brushing that thing? The following is an introduction to the skills of brushing the wall and fixing tiles when decorating.

One of the tips for brushing the wall and fixing tiles; Wall solid is a wall cementitious material, which is an interface agent, which is non-toxic, odorless and environmentally friendly. It mainly plays the role of connecting the upper and lower levels, plays a certain fixed role in the wall decoration, plays the role of wall reinforcement, can ensure that the tile is more firm, the wall is fixed and brushed on the wall, has excellent permeability, can fully moisten the surface of the tile, plays a certain role in adhesion, while consolidating the bottom of the foundation, it can also avoid ash and sand on the wall, increase the adhesion ability of the wall coating in the later stage of decoration, and reduce the probability of wall cracking.

Brush the wall and fix the tile skills two: the typical cement gravel wall surface cracks are more or less, you can use the permeability of the brush wall to fix the tile to fill the cracks, so that the wall is smooth. Only if the wall surface is smooth, the putty will last a long time when scraping, and the cracks and peeling will become smaller.

The third skill of brushing the wall and fixing the tiles; Places like toilets that use water need to be waterproof and tiled. Therefore, on the tile, brush a layer of wall solid, paste it out not only has a good effect, but also has a good strength. The hollowing of the tiles will be minimal, let alone falling. Carry out the decoration of the walls.

When it is tiling, or scraping putty, wallpaper, wall cloth, as long as you want to brush a layer of wall solid, then the safety of brushing the wall and sticking tiles in the later stage is obvious. In order to ensure the quality of decoration, it is necessary to brush a wall solid.

If the wall has been painted, there is no need to paint the wall and fix the tiles. Under normal circumstances, if there is no sand on the ground and the firmness of the cement mortar is better, there is no need to brush the ground. In fact, the ground is completely unnecessary to reinforce, generally before laying tiles, only need to polish the ground, the above content is the introduction of the role of brushing the wall and sticking tiles.

A lot of home improvement owners are hearing this.

The decorator said that the wall needs to be brushed and solidified.

Generally there are two reactions:

What is wall solid for?

Is it a waste of money to paint the wall?

First of all, let's understand the role of wall solidification:

Wall solid is a kind of interface agent, which has the same effect as building glue, which is to compact the base layer, enhance adhesion, and reduce the probability of problems such as hollowing and delamination; However, the material types of wall solid and building glue are different, and the glue is mostly made of polyvinyl alcohol, which will inevitably cause formaldehyde residue and endanger human health when used indoors. The wall solid is made of polymer emulsion and a variety of functional additives, which is non-toxic, safe and environmentally friendly is the biggest advantage of wall solid compared to glue.

Used in**? The wall solid is generally used after the completion of hydropower projects and before the preparation of batch scraping putty, and is painted on the plastering layer (cement sand and ash layer).

Note: Some decoration companies will paint the wall solid before the hydropower slotting process, which is an unreasonable construction method, the main role of the wall solid is to prevent powder and sand, first paint and then transform the hydropower, the coating is exposed for a long time, and the floating ash dust generated by the hydropower slotting is easy to cause secondary pollution.

Can you paste bricks after brushing the wall?

Yes, it is recommended to use large bricks on the wall with tile adhesive and adhesive.

In the decoration of the house, the walls are tiled or painted: this should be considered from two levels, first, due to the limitation of environmental conditions, the bathroom and laundry room also have a kitchenIn this kind of place in the home, due to the dampness and oil stains, the wall is only tiled, so that it can be very good waterproof and clean up the oil stains, and the wall will be very prone to many situations if you want to paint the wall in this natural environment, such as mold, powder, yellowing, etc., and environmental sanitation is therefore a huge test.

From the level of comfort and good-looking to consider most of the places in the home, such as the living room and bedroom, etc., you can use wall paint or other raw materials for the wall decoration design solution, because then you don't need to use tiles Needless to say, there is a crucial reason in it, the tile itself will give people a cold feeling, so the tile is not very suitable for wall decoration in other places such as the living room and bedroom, which is very different from the warm and comfortable theme regulations in the home decoration design.

Advantages of ceramic tiles: the biggest advantage is that the stain resistance is strong, the daily environmental pollution has no impact on it, very moisture-proof and wear-resistant, as long as it is not an artifact stumbling and stumbling, there is no problem. Defects of tiles:

There is no advantage in the price of tiles, compared to latex paint is expensive, and if there is damage, the cost of maintenance is expensive, and you also need to pre-bury the reserved tiles in advance, if there is no pre-embedding then you only have to bear different colors together. Advantages of latex paint: the color type is very colorful, fresh and natural, stable and atmospheric, and you can adjust what color you want.

Ceramic tiles are necessary in bathrooms and restaurant kitchens, and this kind of place is full of high temperature, and it will grow mold after a long time with latex paint, and it is not easy to remove. If there are no exterior wall tiles on the living balcony, you have to pave them directly with tiles, because there is moisture when drying clothes or when it rains. The latex paint has a very good performance in the large living room, restaurant, and bedroom, and if you are tired of seeing a color, you can change itChange the color is a different mood, the warmth of beige, the tranquility of blue, the enthusiasm of bright red, the splendorness of pink, the vitality of emerald green, each color has a different feeling.

The walls should be painted, but the kitchen and bathroom and balcony should be tiled; When tiling the wall, first of all, it is necessary to ensure that the wall is dry, but also to keep the wall flat, and spray the wall slightly wet before using binder or cement mortar.

The wall should be tiled better, and the tiles should be brushed before the tiles, so that it is not easy to fall off.

should be tiled. When pasting tiles, you can choose tile adhesive, so that it will not fall off and will not be hollow.

Bathroom tiled.

Painting the walls of the living room and bedroom.

Painting wall paint is economical and affordable, and you can change it at any time when you are old.

Summary. Hello, I am glad to answer for you, before pasting wall tiles, you need to brush the wall solid. Brushing the wall can lay a good foundation for the wall, especially when the wall has a large area of sand, depowdering and other phenomena, brush a layer of strong, and then paste the brick, it will be more firm.

If there is no problem with the wall, you can also directly paste the wall tiles, and it is not said that the wall must be brushed before tiling. However, it is recommended to paint a layer of wall solid before tiling.

Hello, I have seen your question, and I am sorting out the answer, please wait for a while. Brushing the wall can lay a good foundation for the wall, especially when the wall has a large area of sand, depowdering and other phenomena, brush a layer of strong, and then paste the brick, it will be more firm. If there is no problem with the wall, you can also directly paste the wall tiles, and it is not said that the wall must be brushed before tiling.

However, it is recommended to paint a layer of wall solid before tiling.

I hope the above helps you If you are satisfied with me, please give a thumbs up <>

Wall solid is an efficient interface treatment material to prevent hollowing and sand after tiling.

In fact, the wall is not necessarily used, and the main reason for tiling is to strictly use the cement number in the building code and the ratio of cement mortar. It can also be very good to do tiling without hollowing and sand.

<> If the wall is treated well, the wall tiles can be used without wall solidification, which is a kind of wall base interface treatment material, which can be used to do a good job of base treatment for the base surface of the tile to be pasted, and can enhance the adhesion between the tile and the pasting base surface.

Cement grout can be used for wall tiles, and the strength of the marking is high, so there is no need for wall solidification.

Hello Kiss is happy to answer this question for you. <>

Can the back of the tile be directly brushed on the wall: No. The wall solid is painted on the wall.

The back of the tile is brushed with glue. 1. The adhesive is not the same as the wall solid, which is the wall curing glue, which is a substitute for 801 glue and interface agent, and is a green and environmentally friendly, high-performance interface treatment material. The wall solid has excellent permeability, which can fully infiltrate the surface of the curved shirt material, make the base layer dense, and improve the adhesion of the smooth interface.

2. The adhesive is a polymer polymer cementing material coated on the back of the tile, and the polymer is a fluorine-silicon modified epoxy emulsion developed by Alkali Company. Its main components are high-purity cavity zirconium dioxide, ultra-fine trangling powder, water-based epoxy resin, and nano-permeable materials. After the tile adhesive is applied to the back of the porcelain tile, it can greatly improve the bonding strength of the cement mortar and the tile and prevent the tile from falling off the base surface.

1. Before sticking to the wall to get bricks, you need to brush the wall solid, and brushing the wall can lay a good foundation for the wall, especially when the wall has a large area of sand, depowdering, etc., brush a layer of strong, and then paste the bricks, it will be more firm.

2. If there is no problem with the wall, you can also directly paste the wall tiles, and it is not said that the wall must be brushed before the tiles. However, I recommend that it is better to paint a layer of wall solid before tiling.

3. In the process of home decoration, if the foundation of the wall is good, very smooth, dryness and humidity are just right, then the impact of not brushing the wall is not large, if the wall skin falls off or there is dust, Zhenmin needs to remove the wall skin, clean up the floating dust inside, and then brush a layer of wall solid, lay a good foundation for the wall, and then start to paste tiles, which can prolong the service life of the wall.

When doing wall decoration, many people are curious about the colored paint that the construction master brushes on the cement wall, which is called wall solid. So, should you paint the wall before sticking the wall tiles? What kind of decoration material does the wall solid belong to? Now, let's take a look.

1. Do you need to brush the wall before sticking the wall tiles?

Brush the wall solid before sticking the wall tiles, it depends on the foundation of the wall. If there is a large area of sand or depowdering on the wall, it is necessary to do a good job of hardening the wall and then carry out the operation after the macro is destroyed; If the wall foundation is in good condition, you can directly start to paste wall tiles, which can be done according to the owner's own ideas.

Second, what is wall solidification.

Wall solid, also known as an upgraded interface agent, is a coating used to prevent the wall from sand and infiltrate the base layer. It can improve the stability of the wall, while improving the wall adhesion of other coatings and preventing the wall from cracking. Balanced.

3. Under what circumstances should the wall be brushed.

If the foundation of the wall in your home is in good condition, very smooth, and the dry and humidity are up to standard, there is no problem if you don't brush the wall. However, to meet the end of the acres to the wall skin needs to be removed, the wall cement is slightly sanded, the wall begins to have floating ash and the old wall renovation, at this time we must brush the wall solid, can lay the foundation for the subsequent decoration, to avoid a lot of trouble.

Fourth, the advantages and disadvantages of wall solidification.

1. Advantages. Wall solid, it is a kind of green environmental protection coating, which is very efficient in interface treatment, and its permeability far exceeds that of 108 glue and interface agent. It can fully infiltrate the surface of the wall base material, make the surface of the wall more compact, improve the adhesion, and avoid the occurrence of hollowing.

2. Disadvantages. When doing wall solidification, it is necessary to pay attention to the construction temperature of the site, and the minimum temperature shall not be less than 5.

Article summary: The above is all about the wall before sticking wall tiles. If the wall of your new house will have the undesirable phenomena mentioned in the article, you must do a good job of fixing the wall before tiling.