Why can t I use the socket in the room if there is electricity, and other rooms can use it?

Hello, according to the situation you described, you can use an electric pen to see whether the socket is powered by a single wire or a double wire, if there is electricity on both wires, there will be a short circuit, so it will lead to unusable.

The socket has electricity but the electrical appliances cannot be used, which is caused by poor contact with the neutral line. The main reason: when the contact of a certain place of the zero line is not good, its contact resistance is very large, and the neon bubble is used for the indication of the strip, which has a high sensitivity and shows electricity.

Once the load is plugged in, the voltage drops all over the contact resistor, resulting in a lack of power.

Overhaul: Use an electric pen, in the case of load, measure the zero line, check up if it is shiny, and check down if it is not shiny. The focus is on switches, sockets and terminals, followed by wire connectors.

Skills: You can use the division method, the ** division method, etc. Start from the middle and get twice the result with half the effort.

The socket in the room can't be used, but the other rooms can, and it is likely that there is a problem with the socket. or poor contact.

It may be because there is a problem with the circuit in the room you are in, it should be that each room has a fixed interface, you look at the valve where the main gate is.

If both the live wire and the neutral wire are electrified, then the neutral wire is broken in the circuit. If neither the live wire nor the neutral wire is charged (the pen does not shine), it means that the live wire has a serious poor contact. In both cases, you should find an electrician to check the line and connect the circuit break to work normally.

The socket in the room can't be used for electricity, and other rooms can be used, so the first thing to check is whether there is a problem with the wiring? Is there a problem with poor contact with the socket?

Summary. Dear, hello, I have found out for you why the socket in the room is not powered, and there is electricity in the living room is the wire connector check If there is no problem with the circuit breaker, but the socket in the whole room is not powered, it can almost be concluded that the wire or connector between the circuit breaker and the nearest socket is damaged. The first thing to do is to remove the socket closest to the circuit breaker (the first connector behind the circuit breaker) and check that the connector is in good condition.

On the premise that the connector is intact, close the door and use an electric pen to detect whether the live wire connector has electricity. If there is no power, you need to replace the section of the distribution box to the connector. It means that the bedroom plug board is not powered on.

Hello, I am a designer who has been engaged in the furniture industry for 10 years, and I have paid for craftsmen all my life Familiar areas include chain limb search public decoration, residential, curtain wall three major sub-industries, and I am proficient in hunger. Design, construction, maintenance and maintenance of interior and exterior decoration works. We'll be happy to answer for you.

Hope it helps you <>

Dear, hello, I have found out for you why the socket in the room is not powered, and there is electricity in the living room is the wire connector check If there is no problem with the circuit breaker, but the socket in the whole room is not powered, it can almost be concluded that the wire or connector between the circuit breaker and the nearest socket is damaged. The first thing to do is to remove the socket closest to the circuit breaker (the first connector behind the circuit breaker) and check whether the connector is in good condition. Under the premise that the joint cavity is intact, close the door and use a pen to detect whether the live wire joint has electricity.

If there is no electricity, Wu Mo Ant needs to replace the distribution box to the connector of this section of the wire. It means that the bedroom plug board is not powered on.

Hello, glad to answer for you, the room socket is out of power? All the switches and sockets in the room are not electric, you can consult the neighbors whether there is electricity, if there is no electricity, it means that the community has a power outage. There is no electricity in the socket in the room, and it may also be caused by the tripping of the line.

If the empty valve cannot be pushed up, it means that there is a leakage problem in the electrical appliance, you can unplug the electrical appliance and ask a professional to repair the electrical appliance. The lack of power in the room socket may also be caused by the failure of the socket, such as loose terminal terminals, or aging and damage to the socket, etc. I hope mine can help you, if you are satisfied with my service, please give a thumbs up and guess, I wish you all the best!

The socket line is connected incorrectly, and the ceiling fan forms a series circuit, so the socket plugs in the electrical ceiling fan and works at the same time, but the two electrical appliances will not work normally, which is equivalent to two electrical appliances connected together to share a 220V voltage.

It's obvious. The socket and fan are connected in series.