I forgot the password for my router and it was gone after reinstalling the system! Want to get it ba

The password of the router has nothing to do with reinstalling the system! Because the router password is stored in the router! As long as the router hasn't been altered!

If the router has enabled automatic IP assignment, the computer can reinstall the system and access the Internet without any changes! If it's a manual configuration! All you need to do is set the IP subnet mask, gateway and DNS!

Generally, routers have enabled automatic IP assignment by default! If you want to reset your router, press linkerrr and cjmcmm

Just what the two friends said!!

There is a small hole in the back of the router, next to it: reset, click on the hole, and then the password becomes the default password.

The router has a reboot button on it. To press it with a needle to go in and press it. Pens, too.

After a hard reboot, the password is admin

Once you're in, you can modify the settings.

Hello! Generally, the router needs to be set up after it is just bought or reset and factory reset.

Most of the Internet access methods are divided into two types (the "static IP" method, which is rarely used in households, is omitted here).

Let's talk about the first "dynamic IP" method, which is characterized by the fact that when the router is not used, the network cable can be directly plugged into the computer to access the Internet, and the setting of the router is relatively simple. Here's how:

Disconnect the network cable of the router's WAN port first.

Then enter the router settings interface;

Then restore your router's WAN port network cable connection;

Succeed. Let's talk about the second "PPPOE broadband dial-up" method, this way of surfing the Internet needs to set up an Internet account and password in the router, the router reset is to restore the factory settings, the factory settings are impossible to store your Internet account password, that is to say, after each reset, you must re-enter and save the Internet account and password in the router to work. Here's how:

Enter the router, open the IE browser, and enter or, (this is the default address used by most routers, but please check the nameplate at the bottom of the router or refer to the router user manual for which address);

Find the [Setup Wizard], fill in the pppoe in the Internet mode, click the next step for the others, and then there will be an interface that requires you to fill in the Internet account and password, fill it in truthfully, save the settings, and restart the router to access the Internet;

Succeed. Of course, the above two methods are only the most basic steps to solve the "Internet access", in addition, you also need to modify (or not modify) the name of the wireless network (SSID) according to your own needs, as well as choose WPA2 encryption method, and set a wireless password with a length of 8 63 digits for the wireless network.

I hope it can help you, please ask if you need it. It will definitely help you solve the problem.

Restore the factory settings will reset the dial-up username and password you filled in before, and it will be ok when the network parameters are reset.

If you don't have a password, you'll need to reset it yourself.

1. Set a password for the administrator of the wireless router.

Assuming the IP address of the router is, refer to the label or instruction manual on the router box.

1. Open the browser, enter the IP address of the router), enter the router account and password (see the label or manual on the router box);

2. System tools - choose to modify the login password;

3. Fill in the information according to the actual situation and save it;

If the router needs to be restarted, the system will prompt you to press the restart button as prompted.

Second, the wireless router wifi password setting.

Assuming the IP address of the router is, refer to the label or instruction manual on the router box.

1. Open the browser, enter the IP address of the router), enter the router account and password (see the label or manual on the router box);

2. Wireless setting - wireless security setting;

3. Select a password type, enter the wifi password, and click Save;

If the router needs to be restarted, the system will prompt you to press the restart button as prompted.

After a factory reset, you'll need to set up your wireless router again.

Does the cat connect to the wireless router, do you do this:

Plug in the wireless router, don't pick up the cat first, reset the wireless router (restore the factory), connect the computer to any LAN port of the wireless router, enter the router gateway address in the browser address bar (on the label behind the router), enter the settings page, and set it according to the PPPoe (ADSL virtual dialing) method.

Then set the SSID, encryption method, and password. Save, restart.

After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

I can't connect to the network after the router reset: The router dial-up is not set.

Home Network Environment Cabling]:

1. There is a cat (modem): cat (modem) - router WAN port; The LAN port of the router --- a computer.

2. No modem: network cable --- router WAN port; The LAN port of the router --- a computer.

Computer enters the router]:

1. Open the browser - enter the general router address is this or view the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

Set Router Dialing]:

The IP and DNS settings of the computer are automatically obtained.

1. Enter the router.

Open the browser - enter the general router address is this or check the login information on the back of the router) enter the route - enter the user name, password, (the default is generally admin).

2. In the [Setup Wizard], select [PPPoe Dialing] (some are ADSL Dialing), enter the username and password for Internet access according to the prompts, and save.

3. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

What should I do if I can't connect to the Internet after the router is reset?

You can follow these steps: First, you need to go to the router's settings page, fill in the broadband password again, and click Save. Finally, redial it through the router to connect, and it is generally connected.

How to choose a home router.

1. Look at the wired port specifications.

When buying a wireless router, not only look at the wireless transmission speed, but also check the specifications of its line port, you must know that this is also divided into 100 Gigabit and Gigabit two specifications of the router, generally speaking, like the Gigabit port can exceed the 100 Gigabit requirements, if it is less than 100 Gigabit, you have to choose a 100 Gigabit router.

2. Look**.

At present, there are expensive and cheap ones on the market, for ordinary families, you can choose from almost 200 to 500 yuan, there is no need to buy too expensive, but if it is less than 200 yuan, it is not recommended to buy, you must know that this kind of *** can only buy a 100 megabit port router.

3. Look at the function.

When most people buy a wireless router, they have an idea that the more functions, the better, in fact, this idea is wrong, for the wireless router is not flashy, not the more antennas, the better the signal, to know that a wireless router to play a good role, can be placed in a very critical position, the closer it is, the better the signal.

Just go into the router and set it up like an iPad!

Connect your computer to any LAN port of the router, enter the settings page, and change the WiFi name (SSID) and password of the router.

The method is as follows: 1. Open the browser and enter the IP address of the router gateway in the address bar (there is a label on the back of the router, generally, enter the login username and password (generally admin);

2. After successful login, the running status will be displayed, click "Wireless Settings";

3. Then click "Wireless Security Settings", the wireless network name (SSID) is a name, which can be filled in casually, generally letters + numbers;

4. Then set the password, generally choose the WPA-PSK WPA2-PSK encryption method (password.

If you want 8-16 pieces, you can use alphanumeric.

Combination);5. After setting the password, click Save to prompt restart.

6. Click "Restart Router" in "System Tools" to restart the router.

Have you forgotten your router password or wireless password?If it's the router password, it's reset, and the wireless password settings are the same as before, and they can connect to it automatically. If you forgot the wireless password, just ask a friend, or many mobile phones can check the wireless password in the wireless settings.

Forgotten wireless router passwords can be retrieved by resetting to factory settings.

When the wireless router is powered on, resist or install the reset hole or button on the wireless router for about 10 seconds

When the indicator lights on the wireless router are all off and then turn on again, the wireless router will be successfully restored to factory settings

After the wireless router is successfully reset to factory settings, you can log in with the default account and password on the back of the router

Note: After the wireless router is reset to factory settings, it is recommended to change the login password in time to ensure the safe use of the wireless router.

Note: It is on the manual of the router.

What should I do if I forget my wifi password for my wireless router?In fact, you can use your mobile phone to quickly retrieve it, as long as you turn on the function of your mobile phone, you can immediately know the network password, which is very simple.

Step 1, when you enter the setting interface of trying to access the wireless router, the system will pop up the need to enter the user name and password, at this time, if you enter the user name admin, password admin, and then click the "OK" button, if it prompts "the user name or password is wrong", it means that the password has been modified;

Step 2: Because I forgot the changed password, all I can do now is to reset the admin password according to the prompts;

Step 3: The method of resetting the admin password is: please press the reset button with a sharp object, such as a toothpick, etc., when the product is powered on, keep pressing while observing the SYS (or M2) light, wait for about 5 seconds, when the SYS (or M2) light changes from slow flashing to fast flashing, it means that the product has been successfully restored to factory settings, at this time, release the reset button, and the product will restart;

Step 4: After restarting, the wireless router will be restored to factory settings, and you can log in with the default username admin and default password admin. However, after the product is restored to factory settings, the settings you have made to the product will be replaced by the factory settings, that is, the SSID of the wireless router you set before and the access password of the wireless router will not exist, and you need to log in and set it again;

Step 5: Log in successfully, enter the wireless router setup interface, click "Setup Wizard" on the left, and start the setup. Want to know how to set up a wireless router, =

Solution: 1. If you forget the account password of broadband, you can contact the broadband operator to help solve the problem.

2. After that, enter the account and password for the next step of setting, and you can connect to the Internet.

3. If it is the account and password of the router after reset, you can go to the back of the router to view the IP and account number.

I forgot to call this password directly to the operator, this thing is real-name, so you can find it directly.