I heard that it is easy to get dirty when making a groove in the bathroom, and it is necessary to cl

Generally, the tile in the middle of the groove is generally a small tile or a natural marble with a brushed yarn, and the tile joint in the middle of the small tile and the middle of the tile will cause a convex and concave texture, which is more non-slip than the block tileThe surface of the natural marble has a convex and concave texture, which increases the sliding friction of the road surface, and compared with the smooth surface of the tile, these two are very suitable for the elderly and children at home. The most troublesome problem in the bathroom is the drainage problem, and now the shower area has increased the drainage method by selecting the groove design scheme itself, and the tile in the middle has changed from a block tile to a small tile, and the tile gap has increased, and the water flow along the tile gap has been injected into the groove faster and faster, and the direction is wider.

The bathroom slot sounds very high-end, but it's actually very simple. To put it simply, the middle part of the bathroom is raised, and the surrounding area is about 1 2 cm smaller than the middle position, and the total width is 10 cm. The water flows to a low place, so when taking a bath, the water can flow through to the trough and then to the odor-proof floor drain, which is not easy to cause the water to whirlpool.

Many people feel that it is very easy to accumulate waste in the trough, and it is not easy for unclean things to flow out, but in fact, if the trough is not pulled, the depression area will still accumulate germs, and it is still necessary to remove it in a timely manner, so there is no need to worry too much. There is more spare time, and you can choose to pull the groove if you have a strong ability to clear the work, which is also very atmospheric and beautiful. For small houses, it is recommended to choose a steep slope for drainage!

The ground is non-slip. The protruding surface of the groove generally has a standard pattern gap or the application of antique tiles to improve the friction between the sole and the road surface. Beautiful and generous.

The toilet groove can make the interior decoration of all bathrooms more textured, and at the same time, the concave groove surface and protruding surface can also be paved with unnecessary materials, which is more cheerful. Compared with other drainage methods, the bathroom groove is more usable and beautiful, which not only greatly improves the actual effect of anti-skid on the ground, but also the actual effect of drainage is several times better than that of the general shower room design.

The marble mounds and ravines can have the function of alleviating the water retention rate and improving the odor-proof floor drainage drainage rate. Choosing a steep slope drainage method, you are very worried about its two defects: easy to deviate, due to the formation of a certain inclination angle in the bathroom, if the ground is wet, it is particularly easy to deviate; It is very easy to store water, and the steep slope drainage is not to pay attention to the processing technology, if the inclination angle is not adjusted well, the drainage rate will be slow, so it is very easy to store water.

If you want to choose the ground is non-slip and drainage, it is inevitable that it will be difficult to clean up.

That's true, because garbage can easily fall into crevices, and it can also harbor a lot of bacteria inside, so it needs to be cleaned up frequently.

Yes, if the bathroom is made of a groove, it is indeed very easy to get dirty, and you must clean the brick joints frequently, otherwise it is very easy to breed bacteria

That's right, you should clean once or twice a month, and once if you're particularly busy at work. But it's true that it's easy to get dirty.

It is indeed easy to get dirty when making toilet sinks, and the brick joints should be cleaned frequently. Generally, the tiles attached to the middle of the groove are generally small tiles or frosted marble. The joints between small tiles and tiles will have a concave and convex layering, which is more slippery than large tiles.

However, the surface of frosted marble has concave and convex lines, which increases the friction on the ground. Compared to smooth tiles, both of these are perfect for the elderly and children at home. The most troublesome thing in the bathroom is the drainage problem.

Now the choice of shower area gutter design itself increases the drainage channel. The middle tiles change from large tiles to small tiles, and the gaps between the tiles are widened.

The faster the water flows into the gutters along the tile gaps, the wider the orientation. Whether it is frosted marble or small tiles, the concave and convex lines on the surface greatly increase the layering of the space, especially the small tiles, which also have the effect of extending the field of vision and enlarging the space. Of course, there are drawbacks to this trough brick floor.

One is that the gaps are easy to accumulate dust and dirt, so they should be brushed frequently. So it is better to cut with marble, there are many problems with tile joints. In addition, pay attention to the angle and slope when paving, so that the water can be drained faster.

Bathroom floors, especially rainwater floors, are necessary to design such recesses.

Because sanitary floor tiles may be slippery after seeing water, it is easy to slip and fall when bathing. Especially for the elderly and small children, if they slip and hit the forehead wall or bathroom corner, it can lead to more serious consequences. The toilet sink design can avoid this effect.

Such a design can play a good anti-slip role. If the floor of our bathroom is marble, it can be decorated directly. If you have installed ordinary floor tiles for taxis in your home, you can also use the same method to renovate them.

However, there are many things that need to be paid attention to in the process of reusing the floor gutter in the bathroom. First and foremost, floor sinks need to be cleaned frequently to avoid dust accumulation in the bathroom sink. Post-cleaning will not play its due role, but will affect the normal use of the sink.

The toilet groove should be reasonably combined with the floor drain installed on the ground, otherwise it will affect the floor groove. Groove pulling will not play its due role, but will affect normal use. This requires us to fully consider the practicability of the groove when pulling the groove on the ground to ensure that it can be fully connected with other parts.

It's true. It is easy to hide dirt and dirt in the trough, so be sure to clean it frequently, because you are not a particularly diligent person, do not decorate like this.

This is indeed the case, so in ordinary life, we also have to often clean the brick joints, which is also the experience that the master said.

This is true, so it is better not to decorate the bathroom like this negative.

Not to mention that the bathroom groove is dirty, it is not easy to clean and clean, and it has to be scrubbed one by one, and the groove of the tile groove is easy to hide dirt and dirt and needs to be cleaned frequently

It should be true. When people do this when decorating the bathroom, it may seem more troublesome, and the cleaning work should be more cumbersome afterwards.

It's true, because dust and dirt tend to fall into the crevices, and it's easy to hide dirt inside.

It's true, try not to make the floor of your bathroom uneven, otherwise it will leave a lot of room and it will be very troublesome to clean.

It is indeed easy to this situation, and you can choose the barn door, which can solve many problems and better ensure cleanliness and hygiene.

It's really like this, in fact, there is no need to do this groove, but it will bring a lot of complicated work to yourself.

Most of the bathrooms, kitchens, toilets and other places in the family are paved with tiles, which are very easy to adhere to dirt and need to be cleaned. In fact, there are many ways to clean tiles, Nanchang 5 Fu cleaning network for you to introduce two complete cleaning methods:

One. Take 2% sodium hypochlorite, 1% sodium hydroxide, and 1% sodium alkyl polyether sulfonate to 96% water, stir constantly, mix evenly to become a tile cleaner, and you can use it to rinse. After washing, it is shiny and leaves no residue.

Two. The concentration of 40% sodium xylene sulfonate 6%, ethylene glycol butyl ether 4%, concentration, 60% n-alkylbenzene sulfonate 2%, linear chain fatty alcohol alkoxy compound 2%, sodium metasilicate pentahydrate 3%, sodium pyrophosphate 6% dissolved in 77% water, stir and mix, without dilution, can be directly used for tile cleaning.

1.Soap, mild detergent or warm water can be used to wash to remove dust and dirt from the surface; The surface of the label, film, with warm water, weak detergent to wash.

2.If the surface is contaminated with grease, oil, and lubricating oil, wipe it clean with a soft cloth, and then clean it with a neutral detergent or ammonia solution or with a special detergent.

3.Rust caused by surface dirt can be washed with 10% nitric acid or abrasive detergent, or with special detergents.

4.When cleaning the surface of stainless steel, care must be taken not to scratch the surface, avoid using washing liquid, steel wool, grinding tools, etc. containing bleaching ingredients and abrasives, and rinse the surface with clean water at the end of washing in order to remove the washing liquid.

After cleaning the tank, buy some water-based liquid floor wax (milky white, slightly ammonia-smelling) 1:1 with water, and apply a layer to the surface of the tank to prevent dirt from seeping.

Today, I will share with you how to clean the dirt in the slots and brick joints in the bathroom.

Especially on the slots in the bathroom, or some small gaps in the tiles and on the walls of the bathroom after a long time, there will be a lot of water stains, as well as some yellow or black markings. These stains can be time-consuming and difficult to clean.

1. You can use laundry detergent and detergent that is particularly good at decontamination. First use a particularly dry rag to dip some dry laundry detergent, and then there are dirt grooves and brick joints, wipe all of them first, and then dip the rag with water and wipe it again. Finally, wash the rag in clean water and wipe it all again.

In this way, the dirt in the grooves and brick joints can be removed, and it will also have some special fragrance.

2. You can also use toothpaste to remove the dirt in the groove and brick joint, in fact, toothpaste is the best detergent to squeeze it in the brick joint, and then use a more moist rag. Wipe the dirt from the brick joints vigorously. You can quickly remove the dirt in the brick joints, but when using toothpaste, it is best to use white milky toothpaste.

3. You can also use baking soda to remove the dirt in the grooves and brick joints, first boil water in the pot, and then put two spoons of baking soda to dissolve. Leave it dry until it doesn't feel hot to the touch, then soak a rag, and then wipe the dirty grooves and brick joints. This can also quickly remove the dirt on them, and a light wipe is gone, and the baking soda powder still has a non-slip effect!

4. Especially the dirt in some brick joints is very difficult to remove, if you can't wipe it off with toothpaste, you can also add a toothbrush to scrub the inside of the brick joints.

With the above methods, you can quickly clean up the dirt in the bathroom groove and brick joints, so the groove and brick joints in the bathroom must be cleaned in time, if the cleaning is not timely, the longer the dirt stays, the more difficult it is, and it is particularly clean to clean it.

You can use some small cleaning tools such as toothpicks, cotton swabs, etc., and apply toothpaste to the tools to clean up.

You can use a very common toothpaste, and when cleaning, first wash the tiles, then apply the toothpaste to the gaps between the tiles, and then use a brush to brush slowly.

You can use dish soap to dip on the steel wool ball and brush the dirty areas vigorously, which can be effectively cleaned.

1. There is laundry detergent and detergent.

In our bathroom, the trough is particularly easy to get dirty, but if you don't know how to clean it, it is also very troublesome, use laundry detergent or detergent to clean the tile or trough is very convenientFirst use a clean towel dipped in dry laundry detergent to wipe all over the trough, and then wipe it again with a rag dipped in water, so that the trough is particularly clean

Second, the toothbrush decontamination.

When cleaning tiles or slots, there are some places where the hands are not easy to use, the toothbrush is our good helper, take a used toothbrush and some detergent or laundry detergent to brush a few times on the oilEspecially the yellow water quality in the gaps, you don't need to take up anything, you can brush it directly with a toothbrush to be particularly clean, and the toothbrush is the most effective in cleaning the groove.

3. Toothpaste decontamination

The toothpaste we all use, in fact, its detergency is very strong, we take the toothbrush dipped in the toothpaste, and then the bathroom groove to clean is particularly good, we squeeze a little toothpaste in the groove with a rag to make it not dry or wetThen gently rub the groove and tile place several times, so that the oil stain is no longer gone, and our groove is particularly clean

We have to clean up the bathroom every day, after going to the toilet, clean up the water and stains on the ground in time, and wipe the water on the wall and the water in the groove after taking a bath, so that it will not accumulate dust for a long time.

The toilet has made a trough, which does increase the difficulty of cleaning, but it also has many benefits. Because the tiles pasted in the middle of the groove are generally small tiles or frosted marble, and when pasted, they will be specially polished to produce a sense of concave and convex hierarchy between the tiles.

In this way, the friction between the ground and the ground is invisibly increased, so that the tiles with a smooth surface have strong friction, so it is safer to take a bath at home, and there is no need to worry about slipping, which is very suitable for the elderly and children at home.

With this uneven design, the water drains faster. Now the shower area chooses a trough design, which itself is to increase the drainage channel. The more gaps in these uneven designs are, the faster the water flows out of the gaps in the tiles, and the faster the grooves are washed.

Therefore, there may be some dirt accumulation in the trough, but there is a flow of water every day, and it is not as dirty as everyone thinks.

This uneven design can also increase the sense of hierarchy of the space, and achieve the effect of extending the vision and enlarging the space. Because whether it is a small tile or frosted marble, the texture on the surface can enhance the layering of the space.

Therefore, many people will install a pull groove in the bathroom now, which can be said to be very beneficial.

However, the trough needs to be cleaned regularly, which is also for sure, otherwise the accumulation of dirt will affect the bathroom after a long time, and it will also produce a lot of bacteria. But taking a step back, even if the bathroom is not equipped with a slot, it needs to be cleaned regularly.

Some people say I'm lazy and unwilling to clean the bathroom. If you have this mentality, then don't install the slot, because it does take more time to clean the bathroom after installing the slot.