What should I do if I have just installed a house for a year, but the door panel from the door to th

The whole house is custom-made, what is the door to the top floor, the house that was renovated last year is about a year now, the house has not been lived in yet, I want to go to the nearest condiment shop, I am ready to live for two months, it turns out that many cabinet doors cannot be opened, and the cabinet doors are blocked by the top surface, how is this situation? The cause of this problem has been found to be due to the expansion of the top door of the cabinet section, i.e. the height of the door is higher than a few millimeters ago. This problem arises and it is necessary to make the whole house of the manufacturer custom door panels drop a little if the expansion coefficient.

Not high, a drop of a few millimeters should be no problem.

<> if you expand too much, it will be more troublesome. All door panels must be removed and a new location must be found. Holes in the original door panel can be reopened.

If there is a problem, it is necessary to find out the cause and solve it fundamentally to prevent something like this from happening. There are two reasons for this. The quality of the door panel is too poor.

Not all panels can be made from a door that leads to the top. Now there are too many custom manufacturers, and it is not balanced. A wardrobe for 700 yuan and an apartment for more than 1000 yuan, the final quality is the same, I don't believe it.

To make a top door, we must use a good door number, such as several imported brands and several domestic brands that we are familiar with, which can be trusted.

After installing the cabinet door, the top surface distance is too small, and the top surface distance is also increased by at least 3-5 mm after pressing the normal cabinet door. But now some cabinet doors are almost impossible to open after installation, and it feels like the cabinet doors are very close from the top. After the cabinet door is installed, the gap is small and beautiful, but the probability of problems in the later stage is also very high.

The door is on the top, and it is part of the design that integrates the door into the space, allowing the products of wall panels, wooden doors, and furniture to form any ideal form in the space. The styling design abandons all superfluous lines and decorations, and interprets the design concept of aviation beauty and simple elegance.

The technology breaks through the limitations and achieves a perfect connection between the inlay and the door frame, which is embedded in the wall and is hidden and invisible.

The top-floor design of a wooden panel visually extends the height of the entire space, in line with minimalism.

The pursuit also makes the space appear higher. The wardrobe replaces the walls, and the exterior takes on an invisible atmosphere; Make the wardrobe a wall decoration, especially after a built-in design, the high wardrobe with the ceiling.

The walls are integrated into each other, giving a strong sense of wholeness, highlighting the more stylish atmosphere of the bedroom space.

It is possible that when the weather is hot, the planks have swelled and deformed. The planks protrude from the original shape, so the door could not be opened.

I must have complained to the renovation company, because this is their problem, in fact, this kind of problem is rare.

You can ask the renovation company to come and see, because it has only been a year to become like this, and it is completely their problem, so it will be like this.

The owner said that there is, just after the installation of the special try, can be opened freely. It was found that the cause of this problem was due to the expansion of one of the top of the cabinet doors, which means that the height of the cabinet door was a few millimeters higher than before. If the expansion coefficient is not high, it should be no problem to drop a few millimeters.

If the expansion is too large, it will be more troublesome. It is necessary to remove all the door panels and find a new location. It is possible to re-open the hole in the original door panel.

When something goes wrong, it is necessary to find the cause and solve it fundamentally in order to prevent something like this from happening. The first is that the quality of the door panel is too poor. Not all door panels can be made from one door to the top.

Now there are too many customized manufacturers, and they are uneven. A flat wardrobe is 700 yuan, a flat is more than 1,000 yuan, and the final quality is the same, I don't believe it. To make the top door, we must use good plates, such as several imported brands and several domestic brands that we are familiar with, which can be trusted.

The second reason is that after the cabinet door is installed, the distance between the top surface is too small, and the distance between the top surface is at least 3-5 mm after the normal cabinet door is pressed. But now some cabinet doors can barely be opened after installation, and it feels like the cabinet door is very close to the top. After the cabinet door is installed, although the gap is small and beautiful, the probability of problems in the later stage is also very large.

Therefore, the cabinet door must be kept at a reasonable distance from the top surface after installation, the cabinet door can be left small, the quality of the cabinet door is about the same, you can leave a large point, in general, do not roll the surface to fill the fat.

Home decoration should be based on practicality, supplemented by aesthetics, and the order is prone to errors.

Therefore, the cabinet door must be kept at a reasonable distance from the top surface after installation, the cabinet door can be left small, the quality of the cabinet door is about the same, you can leave a large point, in general, do not roll the surface to fill the fat.

Home decoration should be based on practicality, supplemented by aesthetics, and the order is prone to errors.

I think it may be that it has not been used for a long time, and the door is a little old, so you can directly apply some lubricating oil to the door.