Wi Fi can be connected, but there is no net

Dear users, hello:

1. The wifi itself is a problem, the wifi may not be connected normally, resulting in the inability to access the Internet;

2. Router problems, the router may be overheated or damaged;

3. There may be broadband arrears, resulting in inability to access the Internet;

4. The wifi name contains Chinese, resulting in some mobile phones unable to connect to the Internet;

5. There may be a problem with the mobile phone system, which may cause the connection to wifi but the Internet cannot be accessed.

Suggested workaround:

1. Use other mobile phones or devices to connect to wifi to try whether you can access the Internet and rule out the problem of wifi itself;

2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial up to connect to the Internet;

3. Contact the broadband customer service to confirm whether the broadband is abnormal, such as arrears, recharge the broadband, and then dial up the connection;

4. If the wifi name contains Chinese, it is recommended to modify it to English or a combination of English and numbers before connecting;

5. If the above reasons are ruled out, it is likely to be a problem with the mobile phone system for a long time, it is recommended to restore the factory settings or flash the phone to see if it can solve the problem.

The laptop can connect to a wired network, but it can't connect to a wireless network, which may be a problem.

Summary. 1. The wifi itself is a problem, the wifi is not connected normally, resulting in the inability to access the Internet. 2. Router problems, overheating or damage to the router.

3. Broadband arrears, resulting in inability to access the Internet.

4. The wifi name contains Chinese, resulting in some mobile phones unable to connect to the Internet;

5. Mobile phone system problems, there is a problem with the system, resulting in connecting to wifi but unable to access the Internet.

Suggested workaround:

1. Use other mobile devices to connect to WiFi to try whether you can access the Internet and rule out the problem of WIF itself.

2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial up the connection.

Net. 3. Contact the broadband customer service to confirm whether there is any abnormality in the broadband, such as arrears, recharge the broadband, and then dial up the connection test.

Try. There is no wireless network for any reason.

1. The wifi itself is a problem, the wifi is not connected normally, resulting in the inability to access the Internet. 2. Router problems, overheating or damage to the router. 3. Broadband arrears, resulting in inability to access the Internet.

4. The wifi name contains Chinese, which causes some mobile phones to be unable to connect to the Internet. 5. Mobile phone system problems, there is a problem with the system, resulting in connecting to wifi but unable to access the Internet. Suggested solution for liquid masking:

1. Use other mobile devices to connect to WiFi to try whether you can access the Internet and rule out the problem of WIF itself. 2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or replace the new router in the state of Downtown and then dial up to connect to the Internet. 3. Contact the broadband customer service to confirm whether the broadband is abnormal, such as arrears, recharge the broadband, and then dial up the connection;

Dear, please refer to the above answers, I hope to help you and wish you a happy life! <>

<>Ask about custom messages].

If you are using a Huawei phone and can connect to Wi-Fi but cannot access the Internet, you can use the following methods to troubleshoot the problem:

1. If you are using a home network, it is recommended to connect to other WiFi or mobile phone personal hotspots for testing and troubleshooting

1.If connected to other wifi is normal.

1) Please do not stay away from the router;

2) Please check whether the broadband account expires, restart the router and restart the phone before trying;

3) If the router has been set to the blacklist and whitelist, you need to check whether the MAC address of the mobile phone is added to the router, if the router does not set the blacklist and whitelist, please power off the router and restart the attempt.

2.If you connect to other wifi, you can't get online.

1) Please turn the WLAN switch back on and try to connect;

2. If you are using a public network:

1.Try using it in a place with a small amount and confirm that the hotspot is working properly.

2.Please check if you need to log in through a browser** to register before you can access the Internet.

3. If individual applications are not available online:

Please open Settings, enter Traffic Management in the search box above and click to enter the Traffic Management page, click Application Networking, and check whether the WLAN permissions are checked for individual applications.

1. Call the operator's customer service** to see if there is any problem with the external network. 2. Reseat the network cable once The network cable from the cat is connected to the WAN port of the wireless router, and the computer is connected to any LAN port of the wireless router. 3. Turn off the cat and the wireless router and turn them on, and take a look later.

Fourth, if it still doesn't work, set up the wireless router again. Do you need to dial up the broadband cat to connect to the wireless router, you do this: plug in the wireless router, don't answer the cat first, reset the wireless router (factory reset), connect the computer to any LAN port of the wireless router, enter the router gateway address in the browser address bar (there is on the label behind the router), enter the settings page, and set it according to the PPPoe (ADSL virtual dialing) method.

Then set the SSID, encryption method, and password. Save, restart. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

First, make sure your router is set up correctly.

1. The problem of setting the IP address of the computer.

1) When connecting to the router to surf the Internet, you need to set the IP address on the computer to be automatically obtained (dynamic IP).

Dynamic IP address configuration of the computer.

2) If the administrator of your network requires a fixed IP address to access the Internet, please fill in the correct IP address, subnet mask, gateway and DNS server address in the local connection.

2. Check whether the network is normal.

1. First of all, open PC Manager and select the toolbox in the lower right corner.

2. Select the network repair tool.

3. Click Fix Now.

Check if there is a problem with the router settings, whether the connected devices are blocked, or check if there is a problem with the path of the network connection, and ask a network repair professional to come and take a look, check and solve the problem.

There may be several reasons for the phenomenon of being able to connect to wifi but not being able to access the Internet

1. The network parameters of the wireless router are set incorrectly, and the central office equipment of the ISP operator cannot be dialed and cannot be connected to the Internet.

2. The broadband line is faulty, and the router cannot dial the central office equipment of the ISP operator, and cannot be connected.

3. The broadband DNS server cannot provide domain name resolution services for some reason, and its external phenomenon is very similar to the inability to access the Internet, which is easy to be confused as a network failure.

4. The broadband is cut off by the ISP operator due to the expiration of the tariff, and you need to go to the business hall to pay for the renewal of the contract.

5. The router is set up with IP address filtering, and the IP address obtained by the mobile phone is in the IP segment that prohibits access to the Internet.

6. The router has enabled timed dialing, and the current time is not within the time period of automatic dialing.

7. The modem power is turned off and the router cannot dial the network.

8. The network cable connecting the modem and the wireless router is faulty, such as being bitten by rats or flattened by furniture or the crystal head is not in good contact, resulting in the router being unable to connect to the network.

Wi-Fi precautions:

First, be cautious about using WiFi hotspots in public places. The WiFi provided by the official organization and has a verification mechanism can be connected and used after confirmation by the staff. Other public Wi-Fi that can be connected directly and do not require verification or password are risky, and there may be phishing traps behind them, so try not to use them.

Second, when using WiFi hotspots in public places, try not to conduct online shopping and online banking operations to avoid important personal sensitive information being leaked or even being hacked for bank transfers.

Third, develop good WiFi usage habits. The mobile phone will record the wifi hotspots used, if the wifi switch is turned on, the mobile phone will continue to search for the surroundings, once it encounters the hotspot with the same name, it will be automatically connected, there is a risk of phishing.

Therefore, when we enter a public area, try not to turn on the wifi switch, or turn the wifi to the lock screen and no longer connect automatically, so as to avoid connecting to malicious wifi without us knowing.

Fourth, do not use the default admin for the login account and password in the home router management background, but change it to a strong password with letters and numbers; The Wi-Fi password is set in WPA2 encryption and authentication mode, and the relatively complex password can greatly increase the difficulty of hackers to crack.

Fifth, security software should be installed on both mobile and computer terminals. For attack methods such as phishing** commonly used by hackers, security software can intercept and remind them in time. The "Route Management Master" function that Kingsoft Poison is testing internally can also effectively prevent home routers from being hijacked by attackers and prevent netizens from running naked online.

Can be connected to the Internet, this situation is likely to be broadband disconnection, first check whether the network cable connected to the route is plugged in, can not solve the problem on the network **business** to consult or repair.

This problem is often encountered, I have encountered it several times, whether at home or at work, it is the same, you can turn off the router and restart it to try, the general router also needs to be cleaned up, just like antivirus, or there is too much content to save, in a saturated state, it can't work well, you can also press the reset key behind the router, it also means to restart it (that is, you don't need to unplug the power), you can try.

If it's still not easy to use, then you can try to change the router, because the memory of the router is also large and small, and there is a write in the back, don't take a look, if it's too small or used for too long, it will affect the use effect, either change to a new one, or change to a large memory, you decide for yourself.

If the new memory is still not easy to use, then you have to see if the line is correct, if the line is correct, not connected, then you need to see if the computer is connected to the router, whether there are wrong settings, the above are all set, the computer restarts it and tries to see, it should be successful.

There are two situations of this, the first is the problem of the router, it should be that there is a problem with the router, so there is no network, and the second is that the network is not there in the first place, the router can be connected, which is just not able to access the Internet.

Please reset your wireless router and make sure that there is an IP address parameter under "WAN Port Status", as shown in the figure below. TP-link, Tengda, Mercury, Xunjie, Leike, D-link these brands of wireless router Internet settings, this site has a detailed introduction, please check on this site.

I can't connect to the wifi.

2. The impact of "Internet control".

If the user turns on the "Internet access control" function on the wireless router, but due to the unreasonable setting of Internet access control rules, it will also lead to the situation that the mobile phone is connected to WiFi but cannot access the Internet.

Solution: Disable the Internet Access Control feature, as shown in the following figure.

I can't connect to the wifi.

Part 3: The impact of "wireless MAC address filtering".

The "wireless MAC address filtering" function is mainly used to restrict the Internet access of wireless devices, and if the settings are not reasonable, it will also make you unable to access the Internet.

I can't connect to the wifi.

Fourth, the impact of "parental control".

Parental Control" is the same as "Internet Control" and "Wireless MAC Address Filtering" functions, which are used to control and restrict the Internet access of the device. Generally, these functions are not recommended to be enabled, because if the settings are incorrect, your device will not be able to access the Internet.

Workaround: Turn off Parental Controls.

Mobile phone connected to wifi but can't connect to the Internet?

Your Wi-Fi and telecom operator are not connected, LAN does, so your phone shows a connection, but it can't access the Internet. Contact the operator to see if you haven't paid the bill.

Reasons why the wifi is connected but cannot be connected to the network: installation error, router damage, arrears, wifi name contains Chinese.

The router is damaged, possibly overheating or broken, so you have to buy a new router to operate. There may also be arrears, and you need to call ** to the operator to find out. Or the wifi name contains Chinese, so the computer cannot connect to the Internet.

Here's how to fix the installation error:

1. First of all, check whether the installation is correct, the following picture is the installation method.

2. If there is no error in the installation, it may be that there is no broadband account set, after the mobile phone is connected to the wireless network, open the browser and enter the router address (the router is generally written) to log in to the browser background page.

<>3. Enter the broadband account number and password in the broadband setting interface.

Attention Questions:

Different wireless routers, the settings page will be different, and the names of the relevant functions in different road meng buried by the device are also different, please find the corresponding function in your routing liquid detector settings page, and then turn it off.

When the router is powered on, keep pressing and holding the reset button for more than 10 seconds (different brands of routers have different time requirements for holding the reset button, it is recommended to press it for a while); Generally, when all the indicators in the router are off and flashing again, it means that the router has been successfully restored to factory settings and is restarting, and then release the reset button.