Is the window film on the outside or on the inside?

Hello, car glass film is attached inside. The front windshield film is pasted on the inside, if it is pasted outside, the wind and rain will be exposed, and the life of the use will be shortened by at least two-thirds. Moreover, if it is pasted outside, the fragments of the glass will still hurt people after being hit by external forces, and it will not play the role of explosion-proof film.

Car film is to paste a layer of film-like objects on the front and rear windshields, side windows and sunroofs of vehicles, and this film-like object is also called solar film or explosion-proof heat insulation film. Its function is mainly to block ultraviolet rays, block part of the heat and prevent the sudden burst of glass caused by injuries, and at the same time achieve the purpose of protecting personal privacy according to the one-way perspective performance of the solar film. In addition, it can also reduce the damage caused by ultraviolet radiation to the contents of the car and personnel, and in some ways achieve the effect of saving fuel consumption.

Thank you.

Of course, the window film should be attached to it.

Step 1 Wipe the surface of the glass that needs to be pasted clean.

Step 1 Spray a small amount of water containing detergent on the glass surface.

Step 1 Peel off the transparent protective film on the back of the electrostatic glass film and attach the electrostatic glass film directly to the glass.

Step 1 Finally, use a ruler or a scraper or a towel or rag to scrape out the water and bubbles in it, that is, it is completed.

Step 1 You can also stick the electrostatic glass film to other glasses and use it repeatedly.

Prepare the materials. 1.1 set of cutting knives and blades.

2.Film scraper (large and small) 1 set.

3.1 set of transparent film for pattern making.

4.Baking grab (need to be studded) 1pc.

5.1 set of explosion-proof film heat insulation film.

6.1 set of towels.

7.Protective film: 1 set.

Step 1: The new car does not have anything pasted, first check the car to see if there are any scratches.

Step 2: Spray some water to make patterns for each piece of glass on the front and back, left and right, and cut out the shape.

Step 3: Wrap a protective film on each glass to prevent water from entering the door.

Step 4: Stick the cut film on the window glass and align it to each position.

Step 5: Aim it carefully, not with too much force, be careful that the film will be deformed.

Step 6: Fix the membrane with a scraper.

Step 7: Scrape the water dry and leave every corner open.

Step 8: Use the baking grab to dry the water droplets (the method of side window film is the same).

Step 9: The rear windshield film and the front windshield film are different from the side windows, this is to bake the front windshield film out of shape first, and then it can be pasted inside.

Continue to bake. This is the back gear.

Step 10: Wash the front windshield.

Step 11: Spread the baked film on the front windshield glass and spray some water to paste it.

Step 12: Scrape the water dry.

The effect that has been done.

Precautions. 1. Do not move the glass within 3 days after the window film is installed.

2. Within 15 days after the installation of the window film, do not scrub the film glass with water.

3. Do not use suction cups to hang or fix any items with adhesive on the film glass, and do not paste self-adhesive decorations on the window film.

4. Spray the surface of the window film lightly and evenly with an ammonia-free cleaner, and then gently dry the glass with a clean, soft cotton cloth or soft paper towel, the cotton cloth and paper towel often need to be wrung out, and the pure rubbing alcohol contained in the cotton paper towel will quickly dissolve the huge smudges and greasy fingerprints. If the stain is not washed, respray the cleaning solution and wipe the window film horizontally from top to bottom with a soft rubber wiper until dry. Dry the edges of the glass film with a towel.

5. When adhesive tape, sticky notes or decal paper are used on the window film, the glue or viscose left over when these materials are removed, you can use a soft clean cotton cloth dipped in acetone Nail polishing remover Gently scrub the contaminated area, you can quickly and completely remove the adhesive remaining on the glass film, a small amount of acetone will not damage the polyvinegar film, but it can immediately dissolve and completely evaporate the viscose and most of the spray paint.

6. Do not use a hard eraser, brush, or cloth containing sand to clean the glass film.

The car film is to be attached to the inside of the car glass, because the inside will not be exposed to wind and rain, and the aging will be slower, so as to prolong the service life; At the same time, the film will not be subject to too much external interference during the use of the film, will not be damaged by hanging, will not experience wind and rain, the adhesive will be more firm, and there will be no corners and other conditions. Maintenance after car filming:

Try to avoid washing the car within three days after applying the film, so as not to cause the film to fall off due to the moisture not drying. Try not to open the rear window defogging line within a week, and it is easy to have a negative impact on the defogging line if the moisture is not dry. After attaching, you can wipe the film surface with a damp towel, sponge or soft cloth.

In addition, some time after applying the film, you will notice that there is a foggy water vapor inside. This is a normal phenomenon in the process of drying the solar film, and it will slowly disappear after a while.

Lifting or lowering the window should be avoided for a few days after the film is applied, as the film is not yet fully bonded and prone to displacement. If you accidentally loosen the film during the car wash, you should go back to a professional film shop and have it re-fixed by a professional to ensure the effect and durability.

The window film must have been attached to the inside of that glass.

You probably didn't get a mask on your own.

If it is attached to the sun and rain outside, it will be weathered immediately.

Therefore, the windows of the car, including the windshield film, are attached to it.

Car wrap is attached to the inside of the glass. Here's why:

1. To avoid the damage of the external environment to the film. If the front windshield film is attached to the outside of the glass, the film and wipers will cause scratches and damage to the front windshield film. Other glass films, if pasted on the outside, rain or wind and sand will continue to invade the film, affecting the effect of the film, and it will also damage the film during the car washing process.

2. Another function of the car film is explosion-proof, if you encounter an accident on the way to the car, the car glass is broken, the general car film will stick to the glass fragments to avoid the driver and passengers from the secondary injury of the broken glass piece, but also to improve the safety of the driver and passengers.

3. There is no wind and rain in it, which can improve the service life and slow down aging.

The car film is to be pasted on the inside of the car glass, the reason is very simple, and then there will be no wind and rain on the inside, and the film will not be subject to too much external interference during the use of the film, because the film is glued, without the baptism of wind and rain, it must be very firmly pasted, and it will not be affected on the inside when used.

Since the film is attached to the inside of the car glass, the wiper will definitely not scratch the glass film, because the wiper is on the outside, and there is no need to remove the car glass when pasting the car film.

The window film is attached to the inside of the car, and if it is pasted outside, it is easier to break if it is exposed to wind and rain, and it is not durable.

The general car film is attached to the inside of the car.

The window film is attached to the inside of the glass.

Because of wind and sun, or degumming, the window film is attached to the window

Car wrap is meant to be attached to the inside of the car. Car film not only protects against ultraviolet rays, blocks some heat, but also prevents glass from bursting. Car film, referred to as "car film", is a film that is pasted on car glass for beauty, safety and heat insulation.

Its basic properties include safety, clarity, anti-glare, UV protection, heat insulation, scratch resistance, adequate shelf life and privacy protection.

Overall, there are 7 major benefits of automotive glass films:

1. Heat insulation and sun protection. The film is a good barrier to a large amount of heat generated by infrared rays. For example, the front baffle film MA70 of Mocha film can reach 99% of infrared blocking rate.

2. Ultraviolet insulation. The medium and long waves of ultraviolet rays can penetrate very thick glass, and 99% of ultraviolet rays can be blocked by applying a heat insulation film. Preventing ** injuries can also reduce the aging of car interiors.

For example, the Mocha film MA70 can block ultraviolet rays, which is equivalent to 56 times that of sunscreen SPF40, so it has become a recommended product of the American Association for the Prevention of Cancer.

3. Safety and explosion-proof. The base layer of the film is polyester film, which has the function of being very tear-resistant and anti-breakdown, and the adhesive layer of the film can increase the strength of the glass by 100 times after the film. Prevent accidental glass breakage from causing secondary injuries to the driver and passengers.

The thickness of the Mocha film is 2mil-4mil, and the explosion-proof performance is greatly enhanced.

4. Create a private space. After applying the film, you can not see the inside of the car clearly from a distance of one meter from the body, and retain privacy and security.

5. Reduce air conditioning and save consumption. Air conditioning consumption savings are reduced by nearly 15%. The loss of refrigeration capacity of the air conditioner can be compensated for by attaching a heat insulation film, which can instantly reduce the temperature in the car and achieve a certain degree of fuel saving.

6. Increase aesthetics. According to personal preference, the car can be personalized and beautiful through the film.

7. Anti-glare. Keep your eyes comfortable. Reduce accidents caused by glare.

Car wrap is attached to the inside of the glass. In order to avoid damage to the film from the external environment.

An important function of the automotive glass film is explosion-proof, when the glass self-explosion or external force impact burst, the glass film can stick to the glass fragments, avoid secondary injury to passengers, and improve safety.

If it is attached to the outside of the glass, when using the wipers, the film and wipers will cause scratches, and rain or wind and sand will continue to invade the film, affecting the effect of the film.

The car wrap is attached to the inside! We're just baking the film outside, and we don't need to remove the glass at all! After we bake the film on the outside, we only need to align it on the inside and stick it on the edges

Inside, some special films can also be attached to the outside.

Car wraps are attached to the inside of the glass. Wipers won't scratch the car wrap. There is no need to remove the window glass when installing car wrap.

Car film is a film that is applied to the front and rear windshields, side windows and sunroofs of vehicles to provide a film-like object for safety and heat insulation. Its function is mainly to block ultraviolet rays, block part of the heat and prevent the sudden burst of glass caused by injuries and other situations, and at the same time, according to the one-way perspective performance of the solar film, to achieve the purpose of protecting personal privacy. It can also reduce damage caused by UV exposure to items and people in the vehicle, saving fuel consumption on some levels.

At the same time, it increases the aesthetics of the vehicle.

Automobile explosion-proof film structure:

1. Anti-wear layer: composed of wear-resistant polyurethane, with a hardness of up to 4h.

2. Colored PET safety base: made by melting and extruding high-strength, high-transparency PET polyester and pigment bidirectional stretching, because the pigment is sandwiched in the PET film, it can prevent oxidation and discoloration, and the service life is up to 8 years.

3. Metal thermal insulation layer: nano-level metal layer with high reflectivity to infrared rays such as aluminum, silver, nickel and other metals by vacuum evaporation or vacuum magnetron sputtering on PET film;

4. Composite adhesive: composed of polyurethane adhesive with good weather resistance and high transparency;

5. UV absorber layer: composed of special UV absorber, which can block 99% of ultraviolet rays;

6. Transparent PET safety base: It is composed of high-strength and high-transparency PET polyester film, the purpose of which is to sandwich the metal layer in the middle, prevent metal oxidation, and prolong the life of the metal film;

7. Installation adhesive: composed of acrylic adhesive with good weather resistance and high transparency;

8. High transparency PET release film.

Stick it outside, I haven't heard of it being posted inside, and it's sticking it outside to play a role, it's windy and rainy, and it can also block the sun.

Of course not, the car film is pasted inside, which not only has a good heat release effect, but also has a long life, so your wipers are specialized.

No, it will not be affected. In addition, when the film is pasted, it needs to be completed by professional construction personnel, and there is no need to remove the glass, as long as the window is not opened or closed within two or three days after the film is completed. If you come to the shop of Master Film, you can see the specific construction process, and the technician will tell you the detailed precautions, don't worry.

Just like the construction diaphragm for our master film, each technician will be very professional and tell you the precautions in detail.

Packed inside, because it is mainly used for heat insulation, not for rain. There is no need to remove the window glass for filming. There will be a master to help with the installation.

The film is all attached to the inside and will not affect the wipers.

The master teaches you how to attach the rear windshield, and you can save a lot of money by learning it.

Inside, of course! It won't scratch. No need to remove the windows.

Inside :) Spray some water on the inner glass, carefully paste the film, don't open or close the window for two days, and it's OK.

Sticking on the inside, so it won't hang, and the film doesn't need to remove the window glass.

It must be inside, and the glass doesn't have to be removed when the film is attached. Rest assured. No matter how bad the film is, it won't come down, at most it will be a little bubble. The better membranes don't exist.

--Suzhou Green City small staff floated by.

Of course, the window film is attached to the inside, that is, inside the glass, and the same is true when the film is applied to the front windshield of the car or the window glass. Because there are many benefits of sticking inside, let's find out together.

1. It is not easy to get dirty. If you put the car film on the inside, it is not as easy to get dirty as the outside, and if you put the car film on the outside, it will not only be ugly, but also difficult to clean. But there will be no such problem when it is pasted inside, and it is not easy to see even if it is dirty.

2. It is not easy to age. Car film will also age due to long use time or environmental reasons, especially if it is pasted outside, whether it is exposed to the wind and sun or rain every day, etc., it will make the film easy to age, shorten the service life, and if it is pasted inside, it can increase the service life.

3. It is not easy to be damaged. For the car film on the front windshield, if it is pasted on the outside, because the friction between the wiper and the car film is large, it will affect the normal use of the wiper and damage the car film, but if it is pasted inside, these problems will be avoided.