Is the car film in or out of the car window?

The car film is to be attached to the inside of the car glass, because the inside will not be exposed to wind and rain, and the aging will be slower, so as to prolong the service life; At the same time, the film will not be subject to too much external interference during use, will not be scratched and damaged, will not experience wind and rain, and the adhesive will be firmer, and there will be no corners and other conditions.

There are 7 benefits of car glass film:

1. Heat insulation and sun protection. The film is a good barrier to a large amount of heat generated by infrared rays.

2. Ultraviolet insulation. The medium and long waves of ultraviolet rays can penetrate very thick glass, and most of the ultraviolet rays can be blocked by applying a heat insulation film. Preventing ** injuries can also reduce the aging of car interiors.

3. Safety and explosion-proof. The base layer of the film is polyester film, which has the function of being very tear-resistant and anti-breakdown, and the adhesive layer of the film can prevent the glass from accidentally breaking the glass and causing damage to the driver and passengers.

4. Create a private space. After choosing the right variety and applying the film, it is usually difficult to see the inside of the car from the outside of the car, while the outside of the car can be seen clearly from the inside of the car, retaining privacy and security.

5. Reduce air conditioning and save consumption. The loss of refrigeration capacity of the air conditioner can be compensated for by attaching a heat insulation film, which can instantly reduce the temperature in the car and achieve a certain degree of fuel saving.

6. Increase aesthetics. According to personal preference, the car can be personalized and beautiful through the film.

7. Anti-glare. Reduce accidents caused by glare.

If mine is helpful to you, remember to light it up, thank you!

The car film is pasted in the car window, because the car glass film itself is very thin, and it will be affected by wind and sun on the outside, and the life will be seriously reduced. In addition, in the event of an accident, the broken glass can be adhered to prevent the glass from splashing and injuring the occupants. If the windshield is broken, it is easy to hurt yourself and cannot play an explosion-proof role.

Car film, also known as sun film or explosion-proof film, is mainly used to block ultraviolet rays, block part of the heat, filter out glare, prevent glass burst and hurt people, and also has the characteristics of one-way perspective to protect privacy.

Car film is divided into two kinds of glass film and body film, if the glass film is pasted on the glass in the car, which can prolong the service life of the glass film, if the body film is pasted on the outside body, used to change the body color or to protect the body paint. It depends on what kind of film you are attaching.

The car film is pasted on the inside of the glass, that is, in the car window, to avoid the damage of the external environment to the film, and an important function of the car glass film is explosion-proof.

It should be outside the window. Because of the film, it requires a large space to operate, and it is obviously inconvenient to operate in the car.

It is attached to the inside of the car, and if it is attached to the outside of the car, it will not be able to be used in a few days.

In the car, it has a certain protective effect on the car film.

In addition, the main function of the car film is to block the light, not to prevent scratches, so pay attention to protection.

If it is attached to the inside of the window glass, that is, the inside of the car, if it is attached to the outside, the dust, rain, bird droppings and other substances outside will damage the glass film in a short time, and the film may be directly brought up when the window glass is lifted.

Car film is pasted in the car window to avoid the damage of the external environment to the film, and an important function of car glass film is explosion-proof. Benefits of automotive glass film: 1. Heat insulation and sun protection:

The film is a good barrier to a large amount of heat generated by infrared rays. 2. Ultraviolet insulation: The medium and long waves in ultraviolet rays can penetrate very thick glass, and most of the ultraviolet rays can be blocked by pasting a heat insulation film. It can also reduce the aging of car interiors.

This is all posted in the car, not outside the car. It's easy to get damaged outside the car, so it's all inside the car.

Whether it is the front and rear windshields or the windows on both sides, the car film is attached to it.

This should be affixed to the window. Because the film is inherently fragile, it is easy to damage if it is attached to the outside of the car window. So the car film should be attached to the car window.

Car window films are attached to the inside of the window, so that it is not easy to fall off. Body wrap is applied to the exterior of the body.

The car film is to be pasted on the inside of the car glass, the reason is very simple, and then there will be no wind and rain on the inside, and the film will not be subject to too much external interference during the use of the film, because the film is glued, without the baptism of wind and rain, it must be very firmly pasted, and it will not be affected on the inside when used.

Of course, the car film is pasted in the car window, and it will not be soaked in rain and car wash water when it is pasted in the car window, so as to prevent the film from falling off and will not be scratched.

Window film is attached to the inside of the window, and the car clothing and color change are attached to the exterior of the car.

Of course, the car film is attached to the outside of the window, and the film is applied to the outside of the car window to protect our glass and prevent the sun.

Is the car film in or out of the window? Generally, car films are attached to the inside of the car window, but there are very few individual ones that are attached to the outside of the car.

Stick it in the car window, because the car glass film itself is very thin, it will be affected by wind and sun on the outside, and the life will be seriously reduced.

The car film is self-adhesive to the outside to protect against ultraviolet rays and sunlight. Prevent chipping. That's what you do when you go to the car detailing department.

Car film is generally pasted in the car window, so as to prevent the car film from falling off easily after wind and rain, so businesses choose to stick it in the car.

The car film is attached to the outside of the car window, and it is generally rarely pasted on the car window. It doesn't work.

As long as this car film is glass, it is attached to the inside, and only the car clothing is attached to the outside.

The gas car film is attached to the inside of the glass to avoid damage to the car film, and the car film plays an explosion-proof and light-blocking role.

Normally, the window is filmed, but it is attached to the inside.

Generally, it is pasted in the car, and it is easy to break when it is pasted outside, and the transparency will be affected by the contact with the car wash for a long time.

Whether it is the front and rear windshields or the side windows, the car film is attached to the inside.

Car wraps are all attached to the inside of the car windows, not to the outside.

The role of car window film.

1.Thermal insulation and sun protection. This film is very good at blocking the large amount of heat generated by infrared rays.

2.UV protection. The medium and long waves of ultraviolet light can penetrate thick glass, and most of the ultraviolet rays can be blocked by applying a heat barrier film. Prevent damage and reduce the aging of car interiors.

3.Explosion-proof. The base layer of the film is polyester film, which has very good tear and breakdown resistance. With the adhesive layer of the film, the strength of the glass after the film can prevent accidental breakage of the glass and cause injury to the driver and passengers.

4.Create a private space. Choose the right breed. After applying the film, you can't see the inside of the car from the outside, but you can see the outside of the car from the inside, maintaining privacy and security.

It is equipped with high-grade glass at the factory.

Luxury cars do not need to be filmed, because they are already equipped with a windshield with sun protection, heat insulation, etc. Glass acoustic and noise reduction takes into account anti-fog and hydrophobic layers (even if it is double glazing). Of course, not all luxury cars do not have stickers, some owners have, and may need privacy.

Some people also noticed that the glass on the back of the luxury car is very dark, probably because of privacy concerns. The dark-colored glass at the back is a specially set privacy glass, and the front is more transparent for driving safety.

It has to do with the habits of car owners.

Why luxury cars.

One or two riders don't stick the film? In addition to the good effect of glass, there are other reasons. First, face, some people buy a good car just for the sake of face.

If you put a ** on it, others can't see the people in the car, and they don't want to be low-key. I just want others to know who is driving the luxury car. This is one of the reasons.

Second, it is unsafe. Everyone knows that the current car stickers are basically dark, but this kind of car stickers will affect driving safety, people who drive luxury cars are usually very rich people, not afraid of anything, afraid that their safety will be affected, so for the sake of safety, do not stick car stickers.

Why don't the first and second drivers of luxury cars show movies? There are two important reasons for this. The first one is a person who drives a luxury car and has a good face.

If you put this film on, you won't be able to see the luxury in the car. Therefore, if you don't put a film, you can show the luxury of the car. The second reason is that the factory has installed a lot of windshields that can protect the privacy of luxury cars.

1. Heat insulation and sun protection. The film can solve the large amount of heat generated by infrared rays.

2. Ultraviolet insulation. The medium and long waves of ultraviolet rays can penetrate very thick glass, and 99% of ultraviolet rays can be blocked by applying a heat insulation film. Preventing ** injuries can also reduce the aging of car interiors.

3. Safety and explosion-proof. The base layer of the film is polyester film, which has the function of being very tear-resistant and anti-breakdown, and the adhesive layer of the film can increase the strength of the glass by 100 times after the film. Prevent accidental glass breakage from causing secondary injuries to the driver and passengers.

4. Create a private space. After applying the film, you can see the inside of the car clearly from the outside of the car, and retain privacy and security.

5. Improve the efficiency of air conditioning. Efficacy may be reduced by nearly 15%. The loss of cooling capacity of the air conditioner can be compensated for by attaching a heat insulation film, which can instantly reduce the temperature in the car and save fuel consumption.

6. Increase aesthetics. Through the film, you can personalize the beautiful car.

7. Anti-glare. Keep your eyes comfortable.

Normally, it is possible, and the traffic law does not clearly stipulate that it cannot be posted, so everyone is encouraged not to post it as much as possible! It depends on personal preference.

It is necessary to apply film to the windows of the car. Here are the specific instructions about car window films:

Precautions after filming: Do not open the sunroof within three days, especially at high speeds; Avoid lifting the windows within three days of applying the film; If bubbles appear on the edge of the membrane, they should be repaired at the construction site within 24 hours; Don't wash your car for three days.

Myth: The darker the film, the better the thermal insulation.

The ultraviolet rays in the sunlight in daily driving are quite harmful to the human body, and the most intuitive feeling of the car glass film for the passengers in the car is to insulate heat and ultraviolet rays. Cars with glass film have better advantages in blocking UV rays than cars without glass film. When driving on a hot day, the temperature inside the car will also be relatively low.

Driving at high speeds, it's easy to hit the front windshield with small pebbles stirred up in front of you. The characteristic of glass is that it is fragile, and if the car is attached to the glass film, the glass will not crack immediately, which will cause injury to the driver.

Another situation is that if you are unfortunate enough to encounter a car thief, the car with glass film will not be broken immediately after the glass is smashed, compared to the car thief who does not have glass film will not succeed immediately, don't underestimate the time of about 1 minute, maybe the thief will give up stealing the car. Therefore, the safety of a car with glass film is better than that of a car without glass film.

Car front windshield film is essential for the following reasons:

1.Traffic management regulations: "The visible light transmittance of the front windshield is not allowed to be less than 70%, and all window glass is not allowed to be pasted with mirror reflective sunshade film".

Therefore, it is not impossible to apply a film to the front windshield, but it is necessary to put a high-quality professional film for the front windshield that achieves 70% light transmittance, and at the same time has a high thermal insulation rate and low visible light reflectivity. In addition, the high-quality front windshield film is made of magnetron sputtering technology, which will not have any impact on mobile communication signals and electromagnetic waves.

2.The front windshield film can prevent glare and create good driving visibility.

3.Generally, when a car accident occurs, the driver is susceptible to injuries caused by the vehicle hitting the front windshield glass shattering and splashing, and the car front windshield film can well prevent the occurrence of such incidents and reduce the damage caused by glass breaking. Because the car film has explosion-proof performance, the explosion-proof performance can ensure that the glass will still stick to its original position after being hit and broken by external forces, and will not splash around.

All high-quality front windshield films have a protective effect on the car and the owner and should be pasted.

4.Prevent grinding glass. Generally, the glass is dirty and temporarily use the rain hanger to do it twice, it is estimated that many people will do so, but the general car will hang twice before spraying glass water, at this time, there will be grit in the small dust on the glass, causing dry friction, so that the glass has a way is not strange.

In addition, the driver's seat of the car is generally within the range of direct sunlight, and the heat and sun protection performance of the car front windshield film can well reduce the driving area to reduce sun exposure and reduce the temperature in the car.

The window glass should still be filmed, because after the film, it can reduce the intensity of ultraviolet radiation and protect privacy, so it is still necessary to apply the film.

Glass film, also known as solar film, is a glass covering material that aims to enhance and improve the thermal, optical and physical properties of glass in use. To put it simply, the main uses of solar film are two points, one is heat insulation; The second is explosion-proof. Originally, in order to shield the strong solar rays and reduce the invasion of solar heat into the car, people developed the early sun paper, which is now commonly known as tea paper, but this kind of film basically does not have the effect of heat insulation, only used for shading, which can be called the first generation of solar film.

Since then, it has undergone several generations of renewals, and finally the current ceramic membrane.

Let's talk about the heat insulation function first, the infrared blocking rate of the general ceramic film can reach between 85% and 98%, note that it is'Infrared'There is a little knowledge here, we are irradiated by the sun and feel the heat mainly because of infrared, because in the spectrum of the sun, infrared occupies much more width than ultraviolet rays, and the wavelength of infrared rays is larger than that of ultraviolet rays, which is easy to spread, and most of the ultraviolet rays are absorbed by the ozone layer when they pass through the earth's atmosphere. Therefore, the heat of the sun mainly travels in the form of infrared rays.