Ask the master to tell me about the key points about floor heating

1.The pipe should be of reliable quality, that is, it is not a human leakage to be compensated.

2.Count several channels according to the area to achieve the appropriate temperature, and at the same time, the breaker should choose a reliable quality, and a leaker should be added.

3.Pavement can be based on its own budget, decide whether to lay a high density board or membrane underneath, and consider whether the height of the security door and the floor is appropriate.

4.The specific gravity of the ground melon seed stone, cement, and sand is according to the ratio of :3, and the melon seed stone is mainly for cracking prevention, because the geothermal heat is relatively hot, which is not good for the floor, and the ground cement layer is higher than the geothermal pipe, more than 1 cm, and the surface should be healthy and calendered. Preferably, the ground should be as flat as possible.

5.Before laying the ground, it is necessary to put 8 pressures on the geothermal heat, more than 12 hours, to see if there is any water leakage, and then lay the ground, the ground is best to be wet, but the wages of workers are high, because of waste labor. That's all you have to think about, think for yourself.

The difference between electric floor heating and water floor heating is mainly that the heat source is not the same, choose the right heating method at home, mainly according to the house type and heating area, electric floor heating is suitable for small households and local heating families, although electricity is a renewable resource, but the area is too large, and the use of energy consumption can not be underestimated. I have water floor heating installed in my home, and electric floor heating is still a little worried about radiation. The cost is about 200-300 yuan square, and I personally recommend that the landlord still choose a company with guaranteed construction services, and can not blindly look at **, heating is a systematic project.

The main point is to choose a good terminal heating system, that is, it depends on whether you use a wall-hung boiler or collective heating. In fact, any pipe is very good, as long as the length of the pipe separated from the separator is not longer than 80 meters, it is best, and the maximum is not longer than 100 meters. Other essentials you must understand, floor heating is simple.

Ask me again if you don't understand! I'm from the heating and cooling company.

Floor heating is one of the commonly used heating equipment in northern families, and it is known as the most comfortable way to heat homes and is well recognized by consumers. So what are the advantages and disadvantages of floor heating? Next, we will bring you a comprehensive introduction to floor heating, and I believe you will have a deeper understanding of floor heating after reading.

First, the advantages of floor heating are introduced.

1. Comfortable. Traditional heating methods will make people's heads hot and feet cold, and the human body will feel uncomfortable when staying indoors. Underfloor heating is by far one of the most ergonomic heating methods, because it evenly distributes the indoor surface temperature, and the room temperature gradually decreases from the bottom to the top, giving people the comfort of warm feet and cool heads.

The fitness concept of traditional Chinese medicine has always been "warm feet and cool top". Moreover, the floor heating air rises naturally, which will not stir the air and destroy the fresh air flow, making the indoor air more healthy and hygienic.

2. Save costs.

The thermal efficiency of floor heating can be efficiently concentrated in the height of human demand, and it is not easy to lose heat in the process of use, which is about 20% more energy-saving than other heating equipment, and the cost can be saved by about 20%. Moreover, floor heating can be divided into households and rooms, which can be adjusted according to the situation, which is more energy-saving.

3. Reduce noise.

At present, the partition floor slabs of commercial houses are prefabricated slabs or cast-in-place slabs, so the sound insulation effect is relatively not very good. The floor heating increases the insulation layer, which increases the sound insulation effect very well, and even if you walk around, it will not affect the users downstairs.

4. Good heat storage function.

The ground layer and concrete layer of floor heating have a good heat storage function, even if the indoor temperature changes, there will be no rapid heating up to cause human discomfort, 5, do not occupy space.

Floor heating is a concealed project, unlike radiators, which need branch pipes to occupy space area. Floor heating has no effect on the later decoration and furniture arrangement, and because the floor heating is buried in the concrete layer, even if it is used for many years, it will not corrode, will not scale, and has a long service life.

Second, the shortcomings of floor heating are introduced.

1. Because the floor heating system is a concealed project, it needs to be about 5-6cm high, which has a relatively large impact on low-rise housing.

2. Because the pipeline is laid underground, it is easy to damage the underground pipeline when the ground is transformed.

3. Because the floor heating pipe is laid underground, if there is a problem in the future, it is easy to damage the underground pipeline, and it is not convenient for secondary decoration, so it is necessary to choose materials with good pressure resistance, temperature resistance, corrosion resistance and thermal stability when purchasing.

4. Compared with the traditional heat sink, the heating speed of floor heating is slower when enabled, which is more suitable for family users who live at home for a long time.

In the case of detailed introduction of floor heating on the Internet, many people generally say that floor heating is the use of radiant heating, many people only see the word radiation source in front of them, distorting the literal meaning, but in fact, floor heating is assembled under the ground, and because the heating of floor heating is heated by the hot water circulation of its pipeline, the temperature in the room rises, so the temperature is evenly proportioned upward, which is the main name of radiant heating for floor heating. Floor heating is a new industrial chain in the south, <>

Many people don't know about the use level, and you can also see the detailed dissolution below. The ambient temperature of floor heating in use is generally adjusted to 45-60, too high will cause the road surface to be too hot and accompanied by the rise of room temperature, the moisture in the air will evaporate, and the customer will feel dry, resulting in discomfort. Due to its performance, electric underfloor heating will not feel the temperature change immediately after it is activated, generally speaking, the temperature change will occur in the morning when the underfloor heating is turned on at night, and it will take about 10-15 hours for the underfloor heating to reach the target ambient temperature.

Unless the radiator is installed, it can be completed in half an hour. At the level of floor heating cleaning and maintenance, after a long period of application, the internal structure of floor heating is very prone to sludge deposition due to water quality problems.

After a long time, it is very easy to occur, and it is difficult to reach the set ambient temperature. And it is easy to cause abnormal underfloor heating. And we also need to pay attention to the use of floor heating, the ambient temperature of floor heating is not too high, generally speaking, the ambient temperature of the pipeline is limited in the case of floor heating, generally between 65 degrees and 75 degrees, if the Wendy of the floor heating is often adjusted too high, the working pressure of the floor heating will be higher and higher, and the floor heating pipeline will easily collapse after a long time, which also needs to be noted!

And we must pay attention to the use of floor heating in the case of timely cleaning and maintenance, it is generally proposed that about 2 years need to be cleaned up after the heating period, the floor heating will be protected and inspected, <>

How can we increase the service life of underfloor heating faster? In the case of underfloor heating, the gate valve is not affected by the opening or closing of the situation, and it will not endanger the application of the day. Many people are often accustomed to no matter it, don't look at it all year round, but in the early stage of heating to exhaust the gas, the actual heating effect is still very good.

If there is no need to apply for a supply outage for a long time, it is necessary to pay attention to draining the water in the pipe to avoid freezing and bursting the floor heating pipe.

Many people think that floor heating does not need to be cared for, but floor heating also needs to be cleaned regularly, and generally the newly installed floor heating should be maintained in the second year.

The misconception of floor heating is that it is not cleaned for a long time. First of all, the pipes should be cleaned before using the underfloor heating, and then the inlet and outlet pipes should be opened and ready for use.

Floor heating also needs to be cleaned regularly, and generally newly installed floor heating needs to be maintained in the second year. And we also need to pay attention to the use of floor heating, the ambient temperature of floor heating is not too high, generally speaking, the ambient temperature of the pipeline is limited in the case of floor heating, generally between 65 degrees and 75 degrees.

1. Laying floor heating needs to raise the ground, if the floor is all down, it is about 7-8 cm. Floor tiles are 9-10 cm. Therefore, it is necessary to pay attention to the distance between the entrance door and the ground, whether the floor is plowed or the door is changed.

2. If it is central heating to floor heating, it is necessary to add a water mixing center or heat exchanger, and the water mixing center is a cooling device. Heating is high-temperature heating, floor heating is low-temperature heating, the principle of the water mixing center is to pull a part of the backwater into the inlet water through the three-way valve, reducing the water temperature of the inlet water, and the indoor water is circulating most of the time, so it has little impact on the water flow of the main pipeline.

3. Floor heating is hot and the head is cool, saving space, energy saving and environmental protection.