The 4 errors that appear on the blue screen are experts to take a look at and give an answer 20

Cause analysis: Blue screen **0x00000f4 may be caused by hardware failure, generally it may be caused by a faulty hard disk or memory, but it is not certain, sometimes a few are caused by other reasons, it is recommended to use the following steps to eliminate and solve the problem. 1. Check whether you have recently reinstalled or upgraded the relevant driver or BIOS, then it is likely to be caused by driver incompatibility, uninstall and reinstall the original driver, especially the graphics card and motherboard driver;

2. If running the software causes an error, it is recommended to reinstall the software and confirm whether the problem occurs, if the software is not compatible with the system, then you need to uninstall and replace the operation;

3. Check whether there are other software running at the same time that causes conflicts, or the host configuration memory is too small to cause memory overflow or exhaustion (you can try to increase the memory to confirm the problem and solve the problem);

4. After eliminating the first three points, then it may be a hardware problem, to determine whether it is a hardware failure, it is recommended to format the hard disk, reinstall the system, see if it is normal, and eliminate viruses and system-related faults;

5. Mainly check the hard disk and memory, check whether the memory metal strip is oxidized, if more than two memories are installed, remove one or change the memory slot, other motherboards, power supply, heat dissipation, etc. should also be checked.

Take out the memory module with an eraser·· Friction friction ··· Then plug it back, if you don't have it, you can use a paper towel and then wipe off the dust of the card slot and restart, and you're done.

Error Analysis: A kernel-level application produced an error, but the Windows Error Handler did not catch it.

It's usually a hardware compatibility error.

Solution: Upgrade the driver or upgrade the BIOS

0x0000008e:

Error Analysis: A kernel-level application produced an error, but the Windows Error Handler did not catch it.

It's usually a hardware compatibility error.

Solution: 1. Check whether the memory is plugged in tightly, and whether the quality is problematic or incompatible.

2. Change and upgrade the drivers of the graphics card, sound card, and network card.

3. If it is a Windows XP system, please install the SP2 patch, if it is a Windows 2000 system, please install the SP4 patch.

4. Antivirus.

0x000000ea:thread_stuck_in_device_driver

Error Analysis: Usually caused by the graphics card or graphics driver.

Solution: Upgrade the latest graphics card driver, if not, you need to replace the graphics card to test whether the fault still occurs.

Blue screen generally has the following reasons:

1. The hardware driver does not match, 2. The memory quality is not good, 3. The hard disk has bad sectors, or the hard disk mode is wrong.

4. Virus in the system, 5. CPU overheating, mainly because these reasons will cause a blue screen, and the way to eliminate the blue screen is:

1. Start with the simplest to eliminate, scan the virus first, and see if there is a blue screen after antivirus.

2. Check the temperature of the CPU and related hardware, if the temperature is high, consider cleaning the cooling system or replacing the radiator or fan, 3. Enter the safe mode to delete the driver and then restart it (mainly the graphics card driver and storage driver).

4. Check whether the hard disk has bad sectors. or whether the hard disk mode in CMOS is set incorrectly.

5. Replace the memory.

The causes of blue screen tend to focus on incompatible hardware and drivers, problematic software, viruses, etc.

Tutorial reloading the system is also an effective way to solve the blue screen).

2. The reason for the memory module. Use an eraser to wipe the gold finger of the memory module back and forth to wipe off the oxide layer, then replace the slot and put it back in.

3. The computer case is not clean for a long time. The CPU fan has accumulated too much ash and cannot operate normally, causing the CPU temperature to be too high, so use a brush or hair dryer to clean up the dust on the inner wall of the case, the CPU fan, the graphics card fan, and the motherboard.

4. There is also a possibility that the system is unstable, at this time, Zhisun needs to restart the computer and press f8 to enter the startup dish and choose it"Boot to the last correct configuration"。

5. If there is an illegal shutdown, or the computer is running suddenly without power, it will lead to bad sectors in the hard disk or loss of system files. In this case, you need to repair the bad sectors of the hard disk.