Win10 runs 90 faster

If the physical memory of the computer is insufficient, it will lead to very low work efficiency, we can adjust the win10 32-bit system virtual memory to speed up the system operation. Generally speaking, virtual memory needs to be set according to the size of the computer's memory.

Click on the Start menu All Apps Windows This Computer, right-click on this computer, click on "Properties" to enter the next step.

In the system window that opens, click "Advanced System Settings" on the left side to enter the next step.

In the system properties window that opens, under Advanced Options, click to open "Settings(s)...."Go to the next step.

In the performance options window that opens, click Change (c)...."Go to the next step.

3. There are many temporary files in the Internet and other systems, and they should be cleaned up.

4. The free space in the system area is too small, and the remaining space is expanded. If it is win7, it is recommended that the system partition be 50G+.

5. There are too many partition fragments in the system, and the partition fragments are sorted out regularly. Defragmenter software comes with the operating system.

Accidentally make the computer card into the embarrassment of PPT? It is said that restarting can solve 90% of computer problems, but Caton has become a hurdle that cannot be overcome by restarting, and my heart is broken! So, what to do?

Add an SSD to it. The software is installed on an SSD. It's going to be a lot faster.

You can install a 360 security guard on your computer, it has a comprehensive function, you can optimize and repair the system with one click, and the effect is still relatively obvious.

Install 360 to clean up the memory and set some background programs to cancel background running.

Here's how:1. First, click on Advanced System Settings in the left list.

2. In the pop-up window, click Advanced Options, and click Settings Options below Performance Options. <>3. Click Change Option in the virtual memory.

4. In the pop-up window, uncheck Automatically manage paging file size for all drives.

5. Click Custom Size, enter the required initial size and maximum value, and click OK.

1. The computer runs slowly, and the white is blocked. Many of these times are related to the computer's excessive amount of self-booting software. Take a look to see if there is a lot of bootup software in the bottom right corner of your computer. If there is, you will right-click and select Settings.

2. In the settings page, the checkbox for automatic operation before booting is not checked. Then click on the app below to do it. Different software settings may vary slightly, but they are usually the same.

3. The computer is running slowly and is blocked, or it may be that your computer configuration is too low. You can right-click the computer in the computer and select Properties.

4. This can check the computer configuration, if the computer configuration is too low. You can add memory to your computer or replace it with a higher-spec computer.

1. Disable the boot startup program.

2. Disable shadows, animations and visual effects.

3. Use the performance monitor effectively.

4. Uninstall the pre-installed software.

1. Disable the boot startup program.

1) Start Task Manager. Press Ctrl-Shift-Esc at the same time, or right-click in the bottom right corner of the screen and select Task Manager.

2) Click on the "Startup" tab and you'll see a list of programs or services that run automatically when Windows starts.

3) If you want to stop a program or service that is automatically loaded at startup, right-click on it and select Disable.

2.Disable shadows, animations, and visual effects.

1) Type and press enter in the Windows 10 search box to launch the System Properties dialog box. Click on the "Advanced" tab here and then click on "Settings" in the System Performance section, and the Performance Options dialog box will pop up.

2) In the Performance Options dialog box, you can turn off visual effects that may slow down Windows 10.

3. Use the performance monitor effectively.

This will start with Resource & Performance Monitor and start collecting information about your system.

4. Uninstall the pre-installed software.

1) Run a system scan to look for adware and malware.

2) If you already have a security suite installed, you can use it directly. An effective application that scans and fixes problems with the system.

Turn off HomeGroup, as this feature will cause the hard disk and CPU to be under high loadMethod: Win+C Settings Change computer settings HomeGroup If you don't need HomeGroup, you can turn off the HomeGroup service directly: Control Panel Management Tools Services HomeGroup Listener and HomeGroup Provider are disabled.

2.Turn off Windows Defender Full Disk Scan of the system, otherwise opening the folder will freeze. Then you can exclude trusted exe programs, it is recommended to exclude the explorer process), if you don't use the antivirus software that comes with the system, you can also turn it off directly.

Win+X Control Panel Windows Defender Settings Enact Protection - Untick and Admin enable Windows Defender uncheck. Control Panel Administrative Tools Service - Windows Defender Service is disabled.

3.Make good use of indexing options to reduce the strain on your hard drive. Control Panel Indexing Options Select index entries Modify Cancel the locations you don't want to index.

The impact of the indexing service on system performance) If you are accustomed to using everything as an artifact to search for files, you can turn off the indexing function. Control Panel Administrative Tools Services - Windows Search is disabled.

4.If you are accustomed to manual defragmentation, you can turn off the defragmentation plan to avoid automatic defragmentation while you are working, which will affect performance. Explorer, check Disk - Properties Tools Optimize and defragment drives Optimize Change settings Deselect Run on schedule.

Method 1: Press the shortcut key "Win+R" to open the Run window.

2. At this time, enter "msconfig", click "OK" or press "Enter".

3. At this time, a window named "System Configuration" will open, and under the "General" option box, check "Load System Services" and "Load Startup Items" under "Selective Startup".

4. Then click "Boot - Advanced Options" in the "Boot Advanced Options" window, check the number under "Number of Processors" and select the largest number Here is "4", click "OK".

5. Next, enter "3" in the "Timeout" dialog box, and finally click "OK".

Method 2: 1. Right-click "This Computer" (Computer) and click "Properties".

2. At this time, a system window will open, click "Advanced System Settings".

3. At this time, a "System Properties" window will pop up, click "Settings" under "Startup and Recovery Failure".

4. In the "Start and Resume Failure" window, change the time of the following two columns to shorten, here to "0", you can change it to "3", and then "OK".

5. Go back to the "System Properties" window, click "Settings" under "Performance", and click "Advanced - Change" in the "Performance Options Window".

6. After clicking "Change", come to the "Virtual Memory" window, uncheck "Automatically manage paging file sizes for all drives", check "No paging files", after checking, click "Settings", click "Settings", a "System Properties" window will appear after clicking "Settings", click "Yes", click "Yes", click "Yes", click "OK" under the "Virtual Memory" window

7. After clicking the "Performance Options Window" and "System Properties" window, you must restart the computer, and there will be operations after restarting the computer.

8. After restarting, open the interface below, and then check the "Automatically manage the paging file size of all drives", and finally save it.

Method 31: Right-click the start icon to open the Control Panel

2. In the control panel (the view mode is a small icon). Click on "Power Options".

3. In the "Power Options" window, click "Select the function of the power button".

4. Click "Select the function of the power button" and regret popping up the "System Settings Window", in this window, first click "Change settings that are not currently available", then check "Enable Fast Startup", and finally "Save Modifications".

Method 4: 1: Press the shortcut key "win+r". Enter OK.

2. Click "Manage Templates - System - Shutdown" in turn, and then double-click "Require Quick Startup".

3. In the "Require Quick Start" window that pops up, check "Started", and finally click "OK".

In recent days, users who install win10 are generally upgraded from win7 and win8, and many users find that after installing win10, the boot is not as fast as the original win7 and win8. Win10 boots up slowly, what's going on? How to solve this problem?

Here's how:

1. Right-click the start button and click "Control Panel".

2. Click "Hardware & Sound" under the "Category" viewing mode

3. Find "Change the function of the power button" in "Power Options".

4. After entering, click "Change settings that are currently unavailable" at the top

5. Then uncheck the first item "Enable Quick Start (Recommended)" in the "Shutdown Settings" at the bottom of the window, and click "Save Modifications".

It should be noted that for users who are not selected by default but also encounter this problem, they need to "enable" it once (after checking it, save the modifications), and then uncheck and save the modifications before it can take effect.

The above is all the content of what to do if the startup becomes very slow after installing win10,In fact, it is not that the speed of win10 loading is slower than win7、win8,But the original win7、win8 is set up in fast start,And after installing win10 is canceled,So win10 boot slowdown。

The computer that everyone uses almost every day, speed may be an indicator that everyone has been pursuing. If the computer is running very slowly, it will seriously affect the user's experience, which will affect our work efficiency. So what to do?

What should I do if win10 is running slowly? If the hardware is fine, you can do this.

Teach you how to optimize the win10 system and speed up the operation.

Answer: The slowness is caused by the "Fast Start" function. This is because the implementation of Fast Boot is based on the graphics driver and the power management driver, but there are many drivers that are not compatible with the Fast Boot feature, resulting in slower boot speeds.

Right-click on the win logo in the bottom left corner of the screen and click on "Control Panel". on the control plane.

Reasons for computer lag:

1. The computer configuration can't afford the system, such as win10, there are certain requirements for the computer configuration 2. There is too much computer garbage.

3. The computer is incompatible.

4. There are too many self-starting items at startup.

5. The computer heat dissipation is not good, resulting in too high temperature.

6. The CPU has ash.