For the second decoration, how to clean the putty powder on the wall?

For the second decoration, the putty powder on the wall should be all removed, otherwise it will affect the secondary decoration.

For the second decoration, the putty powder on the wall should be treated like this, first of all, the putty should be wet, so that he can be separated from the wall, and then start to remove the putty, and finally clean up the residual putty.

For the second decoration, you need to shovel off the putty, which can be fixed on the shovel blade bought in the market with a small blade, and then a little shovel is OK.

The secondary renovation of the house, indicating the previous interior decoration, occurred aSome common product quality problems, endangering the daily living environment, quality of life and emotions, many people in this case, choose the overall secondary decoration in the room, the floor tiles are easy to shovel off, including the removal of some ceiling materials, soon to be able to dismantle neatly, only the interior wall putty powder on the wall, it is very difficult to shovel off, it is a particularly time-consuming and money-burning engineering project. Interior wall putty powder scraped on the walls very thinly

It's not thick, and it's not easy to describe it on A4 paper, but if you want to shovel off such a thin interior wall putty powder, the difficulty factor is obvious. In fact, there are many ways to shovel off the putty powder of the interior wall, there are pneumatic tools for professional grinding putty powder, you can also carry out grinding and polishing as long as you turn on the power supply, the rate is very fast, although there are many advantages, there are also shortcomings and problems, grinding and polishing vibrating cement wall is very easy to crack. The walls of the old house are cement batches, normally the white cement wall does not leak, before the house was built, the wall was mixed with lime powder and gravel to paint the wall, <>

It is very likely that the compressive strength is not large, and it can be shoveled off immediately with a shovel or the internal structural bricks are separated from the painting layer, which is simply said to be a hollow wall, and the wall can be directly repainted, and then the normal procedure process engineering construction can be! After the wall putty is sprinkled, it is still not good to shovel, indicating that your method is not right, the wall putty can not be simply sprinkled after blanching, and then immediately and gradually shoveled, must be evenly and several times sprayed, and the wall should be soaked all over, and it is more convenient to shovel it down at this moment.

Wall putty with a planer is faster, and simple, tidy, a house for one person, more than a day to solve. This pair of wall putty is passed over and over again, the thickness of the wall putty is thick, and the shade of the blade of the planer can also be adjusted. Today's top-of-the-line planersThere are also anti-fouling, as long as there is electricity, the edges can be shoveled, which is much simpler and more convenient than manual shoveling.

But the planer has drawbacks, this thing can not be shoveled, the planer weighs a pound, the shovel top should be lifted hard, this time will be particularly inconvenient, walking is even more inconvenient. Therefore, the top will eventually have to be cleared by manpower.

If you want to shovel off the putty powder, you must first soak the wall and soak it thoroughly, so that the putty powder can be softened, and you can also avoid the dust in the process of shoveling the wall, and then use some sharp iron tools to knock the putty layer down, roll clean water on the drum, and repeatedly operate to let the water fully penetrate under the putty layer, so that it will be particularly easy when shoveling the wall.

It can be handled with some small shovels, and some watering cans can can be used for better cleaning.

In the second renovation, you should first scrape these putty powders, then clean them with water, and then scrape the putty again after smoothing them.

You can use a professional scraper to scrape off these putty powders. In this way, it can make the second decoration of the house more convenient and fast.

If the putty material is particularly bad, we can soak it with water and remove it as much as possible. In this way, only the putty protruding from the wall can be shoveled off, and there is no way to shovel the hollow part of the blade. Next, you need to use a shovel to mark the putty in the sunken position to get better adhesion conditions.

At this time, you must seek the help of a professional decoration team, and you must be a professional construction worker to clean up the putty, and scrape off all the putty and repaint it.

In fact, these putty powders also have to use some shovels, all of which are shoveled down, so that it is convenient to decorate them for the second time, and they can also have a good effect.

Personally, I think that if you want to clean up the putty powder on the wall, it is necessary to use special tools at this time, and general decoration companies have relevant tools.

You can spray some water so that you can get a good moist and then you can get a good cleanup. You can shovel the wall skin directly.

In the second decoration of the house, there will be lime and sand on the walls, you can directly use a shovel to flatten, or you can also separate the internal bricks and its paint layer, if they are empty, you can directly continue to paint.

Spray some water on the wall first, then use a spatula to start the shoveling, and finally clean up the local putty.

Both methods can be employed.

After the decoration, the putty is selected to be ventilated and dried or shaded, mainly depending on the weather of the construction. In humid weather, if ventilation is used to dry, it is likely that the wall putty will crack due to the asynchronous drying and wetting. If the putty dries too slowly, you should choose ventilation drying, because if the putty dries too slowly, it will be easy to mold.

After the wall putty is painted, decoration is an indispensable link. This is because putty paint is only to make the wall surface smooth and has no decorative effect. Below, I'll introduce a few ways to decorate your walls to help you make your walls look better.

1.Wallpapering: Wallpapering is an affordable, simple, and decorative method.

You can choose a wallpaper that suits your style and preferences, then cut it to the specified size, apply professional glue to the wall, and apply it. This method can make a big difference to the wall.

2.Hanging paintings: Hanging paintings on the wall is another simple and effective way to decorate. Choose a painting, **, and other decorations that fit your room, and hang them on the wall using nails or hooks. By hanging paintings, you can make the space more interesting and personalized.

Wallpaper is usually a roll with a large texture, which is coated with a special glue, cut to a specified size, and pasted on the wall. But compared to sticking wallpaper, the ** of wallpaper may be slightly higher.

4.Wallcovering: Wallcovering is thinner than wallpaper, with a thickness of only about 3 mm, and is a relatively new decoration material compared to conventional wallpaper. Wallcovering is usually formed by using equipment to attach fibers to this yarn and coating both sides.

5.Wall paint: Wall paint is a material that makes walls look brighter and shinier. You can choose the color you like, not only to make the wall look smooth, but also to achieve a certain artistic effect.

6.Tile decals: If you need to decorate walls in damp places such as kitchens and bathrooms, tile decals can be the best choice. Compared to other materials, tile decals are more resistant to abrasion and damage, and they are also easier to clean.

When carrying out wall decoration, special attention needs to be paid to the purchase and use of decoration materials. It is necessary to choose the most affordable materials to make the home environment more comfortable and beautiful. At the same time, for construction, it is necessary to pay attention to the correct installation method of materials in order to ensure the decoration effect.