How many ways are there to install a quartz sink? What are the advantages and disadvantages?

The important thing about the assembly of kitchen washing basins is the installation steps of Taichung basin, flat embedded, and Taichung basin, so which one should I install when I buy a stainless steel sink? Let's find out.

1.Undercounter basin installation method.

There are also a lot of auditorium assembly used at this stage, which can basically be used artificial quartz stone, stainless steel sink (high-grade artificial quartz stone stainless steel sink with Hunchun is not suitable for sub-assembly), stainless steel sink, and non-top audience desktop ceramic sink.

Advantages: It is lower than the countertop, which is beneficial to the removal of the countertop, and the visual impact is more unique. Disadvantages: There is a certain difficulty index in production and manufacturing, there are certain requirements for the tensile strength of the cabinet countertop, and there will be a certain degree of difficulty in removing the joints.

2.Flush mounting method.

Flat embedded assembly can be used for audience table type and flat wing artificial quartz stone stainless steel sink and stainless steel sink. Some types of marble stainless steel sinks have rounded edges, and the scheme is designed due to the fact that it is beneficial to fill the silicone to fix the unchanging airtightness. The integration of the flat installation is only the second seamless splicing assembly, basically there are no blind spots and fluctuations, and the visual impact has achieved the extreme, absolute and high degree of unity and uniqueness.

Advantages: no pride fluctuations, not a large gap, very convenient to clear the cabinet countertop, visual impact integrated comfort Disadvantages: the difficulty of production and manufacturing is very high, if the interface with the cabinet counter is uneven, it is easy to stain.

3.Undercounter basin installation method.

More general assembly methods, whether it is artificial quartz stainless steel sink, stainless steel plate, stainless steel sink or ceramic sink that is not common in China, can be put in immediately after the hole is opened, and the nearby silicone seal can be, and some products may be fixed with additional standard parts.

Advantages: The kitchen cabinet is not easy to charge twice, the difficulty of building construction is at least, and the raw materials of the countertop are not picky. Cons:

It is not easy to eliminate the stainless steel sink and countertop, and the silicone is very likely to leak through the void after aging and destruction. However, it is still available as a default installation method.

There are also many undercounter sinks currently used for undermount installation, which are suitable for conventional quartz sinks (high-end quartz sinks with extended edges are not suitable for sub-installation methods), stainless steel sinks, and undercounter ceramic sinks without a top surface.

There are mainly undercounter basin installation and flush installation. The main advantage is that it is easy to clean, and the disadvantage is that it is very troublesome to install.

Flush mounting is suitable for undermount or flat-sided wing quartz sinks, stainless steel sinks. Some types of granite sinks have beveled edges, which are designed to facilitate the filling of silicone fixing seals. The integration of the flat installation is second only to the seamless installation, there are almost no dead angles and drops, and the visual appearance has also reached a high degree of uniformity and beauty.

The key to the assembly of kitchen sink is the installation method of undercounter basin, flush flush and undercounter basin, so which one should I install when I buy a stainless steel sink? Let's find out.

1.Undercounter basin installation.

There are also many undercounter installations at present, suitable for basic artificial quartz stone, stainless steel sink (high-grade quartz stainless steel sink with Hunchun is not suitable for sub-assembly method), stainless steel sink, and ceramic sink without top audience.

Advantages: Smaller than the countertop, which is conducive to cleaning the countertop, and the visual effect is more beautiful and generous. Defects: There is a certain difficulty coefficient in production and processing, there are certain regulations on the compressive strength of the counter surface, and there will be a certain cleaning difficulty coefficient at the interface.

2.Flush mounting.

Flush assembly is suitable for auditorium or flat edge wing artificial quartz stone stainless steel sink and stainless steel sink. Some types of granite stainless steel sinks have chamfered edges, which are designed because they are conducive to filling silicone rubber to fix the immovable seal. The integration of the table-flat assembly is only the seamless splicing assembly, there are almost no blind spots and fluctuations, and the visual effect is also relatively unified, beautiful and generous.

Advantages: no ups and downs of superiority, very small gaps, very convenient to clean the cabinet countertop, visual effect is integrated and comfortable defects: the difficulty coefficient of production and processing is very high, if the seam is uneven with the cabinet countertop, it is easy to form dirt.

3.Undercounter basin installation.

More general assembly methods, whether it is an artificial quartz stainless steel sink, stainless steel plate, stainless steel sink or a ceramic sink that is not common in China, can be put on immediately after punching, and the surrounding silicone can be sealed.

Advantages: Kitchen cabinet dealers are not easy to charge twice, the construction difficulty coefficient is the least, and the cabinet countertop materials are not picked. Defects:

Stainless steel sinks and countertops are not easy to remove, and there is a high risk of water seeping through the gaps after aging and damage to silicone rubber. However, it still exists as the default installation method.

It is possible to install the countertop basin, the installation of the undercounter basin, and the installation of the countertop basin. It can be installed flush or sanded. The advantage of the countertop basin is that it is more decorative, and the disadvantage is that it is easy to replenish water.

The advantage of the large basin is that it is very beautiful and looks more generous, but the disadvantage is that the installation cost is relatively high and the installation difficulty is relatively large.

I think there are three common ways to install; The advantage of the countertop basin is that it is very convenient and easy to take care of, and it is also very convenient, the disadvantage is that it is not durable, the advantage of the undercounter basin is that it is more versatile, it can achieve the feeling of atmosphere, and the disadvantage is that it is relatively thick.

Nowadays, many families will choose quartz sinks in the process of home decoration, which are more durable and easy to clean. But the installation process is a bit more complicated.

Quartz stone sink is good, quartz stone kitchen sink installation method: the overflow hole is to prevent the water lees from flowing outward maintenance hole, so when installing the overflow hole sewer pipe, it is necessary to pay attention to its tightness at the butt with the drying tank, to ensure that the sewer pipe itself of the overflow hole is not seepage. When assembling the sewer pipe of the basket and installing the sewer pipe at the bottom of the basket, it is important to pay attention to the connection between the sewer pipe and the drying tank, which is not only strong, but also needs to be better sealed.

The assembly of the overall water pipe, generally everyone will buy two baskets of water lees, but the distance between the two sewer pipes is far away, workers in the installation, will be in accordance with the plan to carry out laser cutting of the supporting drainage pipes, at this time it is necessary to pay attention to the tightness between each socket, water seepage problems are easy to appear at the butt.

After the water lees are put into the countertop, the matching hanging piece must be assembled between the drying tank and the countertop of the cabinet to install the sink firmly to prevent the small gap from causing the drying tank to shake left and right. Carry out the drainage pipe experiment, and after the basic installation, the basket is also installed, and the next step of the test is gradually carried out. In the water discharge test, it is necessary to fill the water lees with water and at the same time check the drainage condition of the water at the bottom of the two baskets and the drainage of the overflow hole.

When draining the pipe, once there is a leakage, it should be repaired immediately to ensure that it is not easy to have problems in future application. When buying a stainless steel sink, first look at the thickness of the stainless steel plate, the thickness is appropriate, too thin endangers the service life and compressive strength of the slime, too thick is very easy to harm the kitchenware.

Secondly, look at the surface treatment process again, the smoothness of the contour is high, but it is very easy to scratch; The anti-wear of the milling edge is easy to accumulate stains; The matte one not only has the brightness of contouring, but also has the durability of milling, and there are generally more choices. The surface of the stainless steel sink is easy to be scratched, so the surface layer is best treated by metal drawing, grinding and other special treatments, which can not only withstand continuous damage, but also be more resistant to staining and easy to clean. The most important reference values for the selection of ceramic sinks are the smoothness of the glaze layer, the color and the water storage capacity of the porcelain.

The product with high smoothness, authentic tone, not easy to hang dirty and scaled, easy to clean, and strong self-cleaning. The lower the water absorption, the better the product.

Both sinks are common sinks in the kitchen, and each has its own advantages. You can choose according to the needs of your family. When installing, the size should be measured and installed by professional personnel.

The Chinese's kitchen is still stainless steel will be more suitable, because there will often be hot water and hot oil directly through the washing basin, quartz stone is easy to leave traces, and can not be repaired.

Installation method: first confirm the size of the sink and the size of the hole to be dug, and then determine the installation position of the sink, mark the opening line, use the hole opener to make holes, and the number of holes needs to be combined with the tightness of the basin. Then the edge of the hole is milled out according to the drawing, and the glass glue is driven under the hole, and the basin is placed later, and then reinforced with super glue.

I prefer stainless steel, which is perfect for use in the kitchen, is sturdy and easy to clean.

There are many kinds of hand materials for sinks in the market, and quartz sinks are one of them. Quartz sink practicality is relatively strong, many users in the purchase of quartz sink, the advantages of quartz sink people speak highly of it, many users in the choice of quartz sink when will understand whether it is resistant to acid and alkali corrosion and anti-penetration, with not old and so on can better choose quartz sink, the following for you to introduce the advantages of quartz sink.

What are the advantages of quartz sinks.

1. What is a quartz sink?

Quartz sinks are a type of stone sink. Sinks on the market are generally divided into two categories: stainless steel sinks and stone sinks.

Stainless steel sink refers to the sink made of stainless steel, and the stone sink is generally a sink formed after the processing of stone argument materials. The quartz stone sink refers to the sink formed after the quartz stone is processed and polished.

1. The advantages of quartz sink - acid and alkali corrosion resistance.

Quartz sinks are very resistant to acid and alkali corrosion. The sink is a sanitary ware installed in the kitchen, and there are some items such as vinegar, soy sauce and salt that corrode the sink in the kitchen. At this time, the advantages of quartz sink are reflected, it is very corrosion-resistant, and does not shoot the erosion of salt, vinegar, etc.

Second, the advantages of quartz sink - scratch resistance.

The first advantage of quartz sinks is that the slag is very scratch-resistant and basically will not be scratched. This is due to the fact that the material used in quartz sinks is quartz, which is a very hard stone, which is second only to diamond in hardness in natural mineral deposits. Even if you use a steel wool ball and scratch it hard, it will not scratch it.

Third, the advantages of quartz sink - anti-penetration, not old.

Some people think that quartz sinks are made of quartz, and that sinks are in contact with water all year round, and all kinds of sewage may seep in. This view is actually wrong, the surface of the quartz sink has undergone more than 30 messy polishing techniques, and the polished quartz sink can effectively prevent the penetration of liquids, and will not cause yellowing and discoloration. Usually, as long as it is treated with water regularly.

Reminder: What are the advantages of quartz sinks, you should have an understanding, the ** of quartz sinks is very high, generally speaking, a good stainless steel sink, ** is about 1,000 yuan. But the quartz sink ** is about 1,000 yuan.

In fact, aside from the best factors, quartz sink is a sink with many advantages, and it is still very good to use in the kitchen.

The choice of materials is also very important when people choose a sink, and many people still have more questions about the shortcomings of stone preparation stone sinks, so whether quartz stone sinks are suitable for sinks? Next, I will introduce to you the characteristics of quartz stone sinks.

First, the disadvantages of quartz stone sinks.

1. The hardness of quartz stone is relatively hard, and it is very difficult to cut for production, which leads to the simplification of the style of quartz stone sink, and the scope of applicable decoration style is also relatively small.

2. The best quartz stone sinks on the market are real and fake, but it is difficult for us to distinguish between true and false from the appearance.

3. Compared with other materials imitation oak Zen sinks, the production cost of quartz stone sinks is relatively high, and it is far more than other sinks.

Second, the advantages of stone such as stone sink.

1. Quartz stone sink is a fire-resistant material, which will not cause the surface to crack or even burn due to contact with high temperature.

2. The surface of the quartz stone sink will not be scratched due to the bump of the knife, and it does not need frequent maintenance and maintenance.

3. Quartz stone has a high density, and the material is environmentally friendly, so there is no need to worry about emitting toxic gases.

3. What are the brands of quartz stone sinks?

The brands of quartz stone sinks in the market include Jiumu, Supor, Dongpeng, Pulomei, etc., the quality of these brands of quartz sinks is guaranteed to a certain extent, and these brands are among the top ten brands of quartz sinks, and the reputation of the products among consumers is also very good.

In general, the advantages and disadvantages of quartz stone sinks are still relatively obvious, we should combine its advantages and disadvantages to make a decision, in addition to the selection of quartz sinks in the process of identifying the more well-known brands, after all, good brands in the quality of the guarantee will be more, the above is about the characteristics of quartz sinks, I hope to help you, if you need to know more about the relevant knowledge, please continue to pay attention to Qeeka Home consulting platform.