What should I do if the washing machine inlet pipe joint is leaking?

Causes and treatment methods of washing machine inlet pipe leakage:

1) The joint between the inlet pipe and the faucet is leaking, and if the rubber pad inside is broken, it needs to be replaced, most of the reasons are caused by loose screws. Tighten the screws and it will be solved.

2) The connection between the water inlet pipe and the washing machine leaks, which is caused by cracks in the plastic nut or is not tightly sealed! Solution: Tighten the nut, or replace the inlet pipe.

3) If the inlet pipe is broken, it is recommended to replace it.

The solution to the water leakage at the water pipe interface of the washing machine is as follows:

1. The water inlet pipe is not tightened. This situation often happens, when installing the water inlet pipe, if the joint is not tightened, it will lead to water leakage when the washing machine is used, or after the washing machine is used for a long time, the joint is loose, use maintenance tools, tighten the joint, then solve the problem of washing machine water inlet pipe leakage.

2. The water inlet pipe is broken. Due to long-term water erosion, the joints of the inlet pipe will be corroded, resulting in water leakage. The only solution is to replace the inlet pipe.

3. The water-stopping tape where the faucet fixing screw is damaged. In this case, simply remove the faucet with a wrench and re-roll the new water-stop tape where the fixing screws are.

4. If the faucet still leaks after being tightly tethered, it may be the axial gasket in the faucet.

Abrasion causes water leakage at the outlet. In this case, pliers can be used.

Loosen the gland and remove it, take out the axial gasket with a clip, and replace it with a new axial spacer.

1. It may be that the screws at the connection of the washing machine's water inlet pipe are loose, which makes the washing machine water leak at the water inlet pipe joint. 2. It may be that the size of the faucet and the washing machine inlet pipe in the home does not match, resulting in water leakage. 3. It may be because the leather pad in the water inlet pipe of the washing machine has fallen off or broken.

Suggested solutions: 1. When the screw at the connection of the inlet pipe of the washing machine is loose, it will cause the connection between the washing machine and the inlet pipe to be not tight, which will cause water leakage at the joint of the inlet pipe. In this case, you need to use professional maintenance equipment and then tighten the screws, so that you can solve the problem of water leakage at the inlet pipe joint of the washing machine.

2. When the size of the faucet and the washing machine inlet pipe in the home do not match, it will cause a large gap in the connection, resulting in water leakage. When this happens, you only need to go to the hardware store and buy a faucet that matches the size of the washing machine's inlet pipe and replace it. 3. The function of the leather cushion in the water inlet pipe of the washing machine is to reduce the gap between the washing machine and the water inlet pipe, so as to prevent water leakage at the joint of the water inlet pipe of the washing machine.

It is needed when the leather pad falls off or breaks. Go to the hardware store and buy a matching leather cushion to replace it, so that you can prevent water leakage at the water inlet pipe joint of the washing machine.

The reasons may be: 1. The inlet pipe is not tightened. Second, the water inlet is collapsing and the pipe is broken.

3. Caused by damage to the water-stopping tape of the faucet part. Fourth, caused by the wear of the shaft gasket in the faucet. 5. Water leakage in the lower part of the faucet tether caused by the wear of the triangular gasket in the gland.

6. The cap nut is loose.

Suggested Treatment:

1. First of all, check whether the water pipe is tightened, and tighten the joint if it is not tightened before drying, which can directly solve the problem of water leakage. It is recommended not to operate with bare hands when tightening the joint, as the strength of the hand does not make the joint secure.

2. The user can unplug the connector from the faucet, and then check whether the rubber sealing ring in the pipe is there, if it is inside, use your fingers to pluck the rubber ring to make it flat, and then screw the joint on the faucet.

3. Remove the original raw tape, re-wrap the new raw tape and install it several times, but be sure to tighten the joint.

4. When installing the washing machine faucet, it can be replaced with a special faucet, with an annular groove at the mouth, and a steel ball at the head of the washing machine inlet pipe, which is just stuck in that groove, which is easy to disassemble, and generally will not leak after installation.

5. When the washing machine is working, try to avoid the phenomenon of leakage and running to keep the bathroom clean and tidy.

6. Remove the gland with pliers, remove the spindle with clamps, and replace it with a new spindle gasket.