What is the reason why the gas stove goes out What is the reason for the gas stove to go out

1. Improper orientation of the incineration needle will cause the separation between the incineration needle and the fire cover of the gas stove to exceed the required interval, and the interval exceeding the standard will cause the gas stove to turn off automatically.

Solution: Control the distance between the incineration needle and the fire cover within the range of 4-6mm, and aim the fire hole when ignition.

2. The incineration needle is dirty. If the gas stove is used for a long time, then the incineration needle is easily stained by oil, and the incineration needle is too dirty, which will cause the gas stove to turn off automatically.

Solution: Clean the incineration needle and use it again after cleaning.

3. Insufficient gas or gas pressure will also cause the gas stove to go out naturally.

Solution: Replenish gas or air pressure.

4. Once the electronic lighter is damaged, it will not be able to work normally, and the gas stove will be extinguished naturally;

Solution: Replace it with a new electronic lighter.

5. If the gas contains miscellaneous gas, it will cause the gas to be impure, so that it cannot support the normal work of the gas stove

Solution: Replace it with a new gas with higher purity.

6. If the induction needle is broken, the gas will be automatically extinguished;

Solution: Ask a professional to replace the sensor needle.

Some people are more sloppy, such as the gas stove itself is not enough gas, or there is a recharge type gas meter, if it is not recharged in time, it will lead to insufficient gas volume, and the problem of gas outage will appear, so it will automatically turn off. Or because there is no battery, it will also lead to the problem of automatic flameout.

The second reason is that in the process of use, it may be good at the beginning, but the gas stove circuit is not smooth, which will lead to insufficient gas ** and the problem of flameout.

1. Air pressure is unstableThe gas stove is on, but the flame is too weak, so weak that it can't reach the stove head, so that the air pressure of the gas stove will be very low, and the natural gas stove will not be able to burn the fire as usual, and will go out.

2. The gas thermocouple is broken:This situation occurs when the flame of the gas stove is normal, and the thermocouple is old or damaged, so it cannot provide the pulse signal of strength as usual.

Gas stove maintenance method:

There are two most common faults in the repair of electronic gas stoves.

The igniter does not produce sparks, and the piezoelectric ceramic positive machine of the natural igniter does not produce sparks, so that the cooktop cannot ignite. This fault is mainly caused by the automatic switch to the piezoelectric ceramic positive wire connected to the piezoelectric ceramic cathode due to the break, can be reconnected with the wire reliably.

The reason is that the positive and negative electrodes of the gas stove battery box are rusty, and the line contact is poor, so the rust needs to be removed and the line is accurately connected; It is also possible that there is no gas and you need to recharge the gas in time; There is also the possibility of gas stove overpressure protection, which can be solved by replacing the pressure reducing valve with a new one; Or the gas pipeline is blocked, and the gas pipe source flush needs to be dredged.

Gas stove maintenance suggestions: gas stoves should be cleaned regularly, gas stoves that are not cleaned for a long time will crack violently, and a large amount of oil will accumulate on the surface. If the oil fills the fire hole, it is easy to cause failure, and to keep it dry, the gas stove in the process of use, people can not leave the kitchen, to keep the parts inside the gas stove dry, otherwise it is easy to cause damage to the parts, the kitchen is a very dirty place, it is easy to be contaminated with oil, etc., the gas stove is placed for too long, the ignition needle is easy to be stained by the oil, then you need to clean the ignition needle of the grease, and then try to ignite.

After the stove is used, the cooktop should be kept clean, and the fire holes on the burner of the gas stove are easy to be blocked by porridge, vegetable soup, dust and other dirt, so it should be decontaminated in time. Regularly clean and unclog the vents on the stove head to prevent clogging. The thermocoupler should be sanded with fine sand skin frequently, and the oxides accumulated on the thermocoupler or the stains that affect heat transfer should be cleaned to keep the stove clean, the gas unblocked, and keep it in good working condition.

What is the reason why the gas stove automatically turns off.

1. The battery is insufficient.

When the gas stove automatically turns off, if the gas stove still has gas, then it is generally caused by the battery of the gas stove is dead, you can check in detail whether the battery is still charged, if the battery is insufficient, then you need to replace the old battery with a new one.

2. Poor circuit contact.

After the gas stove has been used for a long time, the gas stove is prone to poor circuit contact, which makes the gas stove automatically turn off. At this time, it is necessary to check in detail whether the positive and negative poles of the battery box of the gas stove have rust, whether the line has poor contact, and if so, it is necessary to clean up the rusty position and reconnect the line.

3. Pipeline blockage.

It is also possible that the gas stove automatically turns off because the gas stove pipe is blocked. If you can smell the gas at this time, but the gas stove cannot ignite, then it means that the gas pipeline is blocked, and the blocked pipe should be dredged in time.

4. Overvoltage protection.

Some gas stoves will be equipped with overvoltage protection function, when the gas pressure of the gas stove is too high, the gas stove will automatically turn on the overvoltage protection function to avoid damage to the gas stove. Once the overpressure protection function is turned on, the gas stove cannot be opened, and the pressure reducing valve needs to be replaced.

The above is a detailed introduction to the reason why the gas stove automatically turns off, I hope it can help you answer the doubts in your heart. When the gas stove automatically goes out, you must first find the reason for the flameout, and then take appropriate measures to deal with it according to the actual situation.

There can be many possible reasons why a gas stove can go out, but here are some of the most common ones:

1.Insufficient gas pressure: The gas stove needs a certain amount of gas** pressure, and if there is not enough gas in the gas kettle, it will cause the flame to be uneven or even go out.

2.Blocked fire port: If the fire port, nozzle, oil net and other parts of the gas stove are blocked, it will also cause the flame to be unstable or extinguished, because the mixing ratio of gas and air is not right.

3.External interference: such as wind blowing, furniture movement, etc., will affect the stability of the flame and cause flameout.

4.Gas piping problems: It may be that the pipes are aging or damaged, or the gas pipes are strung together, which can cause the gas stove to go out.

5.Gas stove failure: If the valve of the gas stove is faulty or other internal components fail, it will also cause the flameout phenomenon to occur.

Therefore, if the gas stove is turned off, it is necessary to check whether the gas pressure, the fire outlet, nozzle, oil net and other parts are blocked, and whether there is a risk in the layout of the furniture. If it cannot be solved, it is recommended to contact a professional gas maintenance personnel for inspection and repair in time.

To ensure the continuous combustion, the gas stove must ensure that the feedback circuit (of course, the weak current) is unblocked

When the flame is normal, the feedback loop will provide a continuous gas supply signal to the pulser, otherwise, the pulse will close the solenoid valve (the automatic control element in the gas stove is the second valve in the gas circuit, and the first valve is a manually controlled plug valve, which is in the assembly).

There are two conditions for unimpeded feedback:

First, the flame must burn to the feedback needle (or thermocouple), if the phase or the fire hole is blocked by carbon deposits, or the fire hole and the feedback needle are not aligned, the flame can not be directly connected to the feedback needle, the pulser will think that the flame is extinguished, and immediately shut down the gas source. During maintenance, the flameout of the stove shirt that has been used for a period of time mostly belongs to this situation.

In another case, if the flame is normal, but the thermocouple that acts as a feedback is aging (or the original quality is not good), the signal provided to the pulser is not strong enough, and the pulser will also close the solenoid valve.

The third situation is that the feedback loop is not smooth, such as virtual connection, aging or feedback needle hitting, and the signal cannot be reached.

The last possibility is that the battery is running low.

Just a battery.

The gas stove is inseparable from our family kitchen, and we all attach great importance to its practicality when we use it. After we use it for a long time, we will find that the gas stove is turned off, which will affect our lives. How do we deal with it?

What is the reason and what is the solution to the gas stove flameout?

What is the reason for the disadvantage of gas stove going out?

1. Observe the color of the flame, if there is any abnormality, such as the flame is yellow, you need to adjust the damper.

2. Check the ignition battery voltage. When the voltage of the embedded stove battery is too low, it will turn off the flame protectively. Just change the battery.

3. Check whether the temperature on the combustion plate is heated with the flame, even if it is a small fire.

4. Whether the top cover of the burner is misplaced, not in place, and the cover is wrong.

5. The flame-out protection automatically closes the gas circuit, so the flame is turned off.

Solution for turning off the gas stove.

1. Replace the battery, and then see if the flame in the middle can burn the probe on the broken side, and the probe must be burned to fix the fire. There is still a point, you can hold down for ten seconds, and when you loosen the switch, that probe is hot.

Induction, it has to be burned to fix the fire.

2. To ensure the continuous combustion, the gas stove must ensure the smooth flow of the feedback circuit, and the feedback mechanism of the gas stove is mostly set in the place where the flame can be burned directly, and when the flame is normal, the feedback loop will provide continuous gas supply to the pulser.

signal, otherwise, the pulser closes the solenoid valve.

3. The flame must be burned to the feedback needle, if the corresponding fire hole is blocked by carbon deposit, or the fire hole is not aligned with the feedback needle, the flame can not be directly burned to the feedback needle, the pulser will think that the flame is extinguished, and immediately close the gas source.

During maintenance, the flameout of the stove that has been used for a period of time mostly belongs to this situation.

4. If the flame is normal, and the thermocouple that plays a feedback role is aging, and the signal strength provided to the ruler pulser is not enough, the pulser will also close the solenoid valve. 3. The feedback loop is not smooth, such as virtual connection, aging or reverse.

The needle is fed and the signal cannot be reached. There is also a situation where the gas stove automatically turns off may be that the battery is insufficient, which also needs to be paid attention to.

When we use a gas stove and the engine goes out, we need to find the reason for it, so that it can be better solved. The above is the reason for the gas stove to go out and the solution to the gas stove out that is introduced to you today, and this is the end of it.

Because the boiling pot causes the flame out protection needle to be affected by the soup adhesion and affects the induction, resulting in slow response, the user needs to clean the flame-out protection device to recover.

Other reasons: 1. Failure of the flame-out protection induction needle (skewed or line fault). This situation needs to be repaired, please call the local service **.

2. Because the fire cover on the stove head (ring, with copper black objects with fire holes around) is not placed in place after cleaning (the fire cover is blind to the same hole as a week, there are two small holes next to each other below, which should be facing the ignition needle), resulting in slow gas conduction and slow ignition, which requires re-installation of the fire cover.