When decorating a new house, what should be done about the waterproofing of the bathroom?

Bathroom waterproofing is a very critical project in the decoration process, a little careless, may damage the decoration of the lower owners, therefore, how to do bathroom waterproofing? Let's take a brief look.

1. How to do waterproof in the bathroom.

1. Clean the waterproof places to avoid any particles and stains.

2. Paint the window frames, doors and windows, and the joints of the drain with waterproof paint.

3. Evenly brush the waterproof paint on the parts that need to be waterproof, and then apply the second time by cross-brushing when the paint is dry.

4. Wait for the waterproof layer to dry completely twice, and do a 24-hour closed water test to ensure that there will be no water leakage.

2. What are the precautions for waterproof construction of the bathroom?

1. During the waterproof construction of the bathroom, it is necessary to level with cement mortar first to ensure that the base surface is smooth, and the ground waterproofing also needs to design the slope according to the location of the sewer, so as to avoid water accumulation and make the water flow smoother. In addition, during construction, it is also necessary to pay attention to fire prevention measures.

2. During the waterproof construction of the bathroom, the gap needs to be dealt with first, especially the connection gap between the floor drain and the floor, the connection gap between the window frame and the wall, etc., because it is more difficult to paint these parts.

3. Before the construction of the waterproof layer, the elevation treatment is required. According to professionals, the waterproof layer of the bathroom floor needs to be fully covered, the waterproof layer of the wall in the dry area should be 30 cm higher than the ground, and the waterproof layer of the wall in the wet area should be more than one meter higher than the ground, so as to avoid water droplets splashing on the wall and water seepage.

Summary: The above about how to do toilet waterproofing, as well as bathroom waterproof construction precautions are introduced here, I hope it will help you. Because if the quality of the bathroom waterproofing is not good, it will seep into the downstairs and damage the downstairs ceiling, and the user not only has to re-do the waterproofing, but even need to compensate for the downstairs ceiling.

Clean the base layer of the restroom, including dust, sand, cement, etc. If there are cracks, hollows, and defects on the wall, use cement to smooth out the base to ensure that the base is firm and flat, and the yin and yang corners of the bathroom and the root of the water pipe should avoid dead angles, and make an arc and straight.

First of all, you should choose waterproof decoration materials, in the process of laying to carry out a comprehensive inspection of the bottom of the pipe, not and to reserve a certain inspection channel, in the process of laying must do a good job of waterproof coating, try to choose double-layer waterproof.

Clean and level the ground, remove the dirt on the surface, apply waterproof coating to the bathroom floor, then apply protective coating, and finally do a waterproof test.

Introduction: Many people don't know how to do a good job of waterproofing when decorating the bathroom.

Some people are 10 points happy after buying a house, so when buying a house decoration, you must spend more thought, and you must adjust the design of the bathroom appropriately, see what kind of materials are needed in the bathroom, and then choose. If you want to do a good job of waterproofing when decorating the bathroom, you must do the preliminary work so that you can supervise others to decorate. Some people always like to be lazy when decorating, and don't like to look at others from the side, if you want to do a good job of waterproofing, you must personally supervise.

Be sure to do a good job of moisture-proof at the top, so that you can do some better, some toilets are connected to the bathroom, at this time you must do a proper waterproof, so that you can avoid future troubles. When choosing a waterproof material, you must choose a better waterproof material, so that you can live more comfortably.

If you encounter a problem when decorating the bathroom, then at this time you must learn to change, you must do a good job of the pipeline, you must do a good job of the gusset, you must do some appropriate treatment at this time, if you don't understand it when decorating, you can also ask a professional person to check, you must do a good job of waterproof layer material coating when decorating the waterproof layer, at this time the choice of good materials will make yourself less troublesome in the future. If you want to know whether your waterproof is good or not, you can also do a test to see if the waterproof is qualified, if the waterproof is not qualified, then you must also redo it appropriately, so that you can also prevent yourself from having problems in the future and make appropriate adjustments. If you encounter problems in the bathroom, you can also ask some professionals, and be sure to ask professionals to help you make changes.

When decorating the bathroom, most people will focus on the waterproof system, because the bathroom waterproof is very important, once it is not waterproof, it is easy to let the water flow down, not only affect the relationship between neighbors, but also may cause some adverse effects on the house. Next, I will introduce to you how to do a good job of waterproofing. <>

1. How to do a good job of waterproofing the bathroom.

First of all, you must apply the waterproof material, if you must make sure that the ground is clean before applying the waterproof material, and when applying the waterproof material, you must cover it all over, and do not miss anything. It should also be noted that when choosing a waterproof material, it is advisable to choose the best brand and not cut corners. Secondly, in order to prevent the subsequent construction from damaging the waterproof layer, it is recommended to make a protective layer after coating the waterproof material, so that the protective layer can cover the waterproof layer and will not let the waterproof layer fall off.

Then apply the waterproofing material for the second time, but there needs to be a certain time interval between the two waterproofing materials, and the waterproofing material applied for the first time must be completely dried before applying. A total of three waterproof materials to coat, after the coating can do a closed water test, to ensure that the waterproof system is done, if there is a leakage, it must be removed and redone, can not be negligent. It should also be noted that the wall of the bathroom must also be waterproof, otherwise it will corrode to the wall of the bathroom, you can make a 30 cm high very heavy light wall, and then apply waterproof materials.

Second, the importance of bathroom waterproofing.

When taking a bath or washing clothes in the bathroom, the water will always flow out, so it must be waterproof, otherwise it will make the ground wet, and the water is pervasive, which is easy to cause leakage. In addition, there are a lot of furniture in the bathroom, if the water leaks, it is easy to cause damage to the furniture, and once the water penetrates into the neighbor's house, it is easy to cause conflicts. When decorating the bathroom, it is recommended to do the correct waterproofing work, not too perfunctory, otherwise it will be more expensive when you redo the waterproofing work.

In the future, when decorating the floor in the bathroom, it is recommended to choose a good cement, so that water will not penetrate into the cement.

How to do waterproofing in the bathroom?

Step 1. Clean the ground, the mason finds the slope, the floor drain should be the lowest place in the whole bathroom, the slope should be as large as possible, the drainage is fast in use, and the groove needs to be left at the groove.

Step 2. The water around the sewer pipe should be treated without leakage, and the pipe groove needs to be plastered and closed (the pipe and the corners and corners are the most likely places for water seepage, so we must pay attention to it).

Step 3. Brush the ground with flexible waterproof brushing, do rigid waterproof painting on the wall, pay attention to the wall and the ground are not the same, and the wall can not be brushed with flexible waterproofing, and the door should be set up at the same time to block water (the wall can not have trachoma, loose, if there is one, the wall must be treated, and the grassroots cousin needs to be smooth and clean).

First of all, it is necessary to do this waterproof treatment for all walls and all floors in the bathroom, and must brush the waterproof glue, and then the wall of the bathroom must also be pasted with a corresponding brick, which may be better. In this way, it can also be protected from moisture.

When decorating the bathroom, you must choose very good materials, which must be waterproof and moisture-proof, and the floor tiles of the bathroom must be non-slip, and the waterproof materials must be very good, so that the bathroom can be kept dry.

Attention should be paid to the separation of dry and wet, and moisture-proof treatment should also be done. You should also pay attention to laying out waterproof blankets when decorating. Also pay attention to the ventilation of the bathroom. This way, you can do a good job of waterproofing.

You can do waterproof three times, the height should be 30 cm, and the ground should be cleaned very clean, to be smooth, you should choose some good waterproof coatings.

Sometimes we find that the exterior wall of the bathroom, or the wall adjacent to the bedroom, often has a resurgence of moisture and mold, but many people can't find the reason. In fact, it is the water vapor in the bathroom that slowly penetrates through. Many people are confused about how to penetrate after doing waterproofing, just because you only do rice waterproof, the above is not done, there is no problem at the time of decoration, but after living for a period of time, will the water vapor continue to erode.

Therefore, it is best to do the top at one time when the bathroom decoration is waterproof, so as to avoid the hidden danger of water leakage in later life.

Many people hate water and electricity roofing in bathroom decoration, and always feel that this will cost more money, but in fact, it is not the case, water and electricity roofing can find water leakage in time, and timely repair is conducive to maintenance. If it's a walk, then you can only know if an upstairs neighbor comes to the door.

Hydropower roofing is also conducive to waterproofing, because if you go to the ground, then the water pipe and the wall and the ground will have elbows, this place is difficult to deal with waterproofing, and if it is not done well, there will be cracking, and the water will slowly penetrate down the water pipe. If it is a hydropower roof, then the ground will be flat and smooth, it will be more convenient to do waterproofing, and it will also reduce the hidden danger of water leakage in the later stage. Therefore, it is best to do the top treatment of toilet water and electricity.

There is a place where bathroom waterproofing is more important, that is, the location of the threshold stone, this place is relatively easy to leak, if it is not done well, the water will slowly penetrate into the living room along the gap of the door stone, and when you find that the floor is basically soaked, then you can only replace it again, and the serious one will leak to leak, causing a lot of unnecessary losses!

When the bathroom has done the door stone, there will be a stone of the water-stop pier under the ground, this thing is to prevent water from penetrating into the living room, there is no problem with the water-stopping pier itself, the key is the gap next to it, these gaps are easy to leak, so during the construction, these gaps should be tightly sealed with glue, and then the door stone, the same gap should also be sealed tightly with glue to avoid leakage into the living room in the later stage.

First of all, the floor of the bathroom should be cleaned up, the paving is particularly tidy, and the flatness of the ground should reach a certain standard, after the ground flatness is qualified, a layer of waterproof material should be brushed, the thickness of the waterproof material coating should reach about two centimeters, and the coating should be brushed for a period of time, and it can be kept for three days before the next step of operation, and the colored ring yarn or sealant can be bonded through various places in the pipeline.

The ground and walls should be waterproofed, so that it can have a better waterproof effect.

How to do waterproofing in the bathroom?

1. Ground treatment.

Before carrying out the waterproofing treatment of the bathroom, be sure to level the ground first, if the ground is uneven or the effect is not good, it may cause cracking and leakage caused by the uneven thickness of the waterproof coating. Floor drains, wall corners, pipe heels and other joints should be painted with high elasticity and flexible waterproofing, because the joints between the wall and the floor of the bathroom will be displaced, and water seepage is most likely to occur.

2. Wall treatment.

If the bathroom has a shower room, the waterproof height of the bathroom should be 180cm, and if there is a bathtub, the waterproof height of the wall adjacent to the bathtub should be 30cm higher than the bathtub.

3. Detail processing.

The detailed treatment of toilet waterproofing mainly includes: pipe roots, floor drains and wall corners and other waterproof weak parts. Some walls in bathrooms and kitchens are not load-bearing walls, so they are prone to cracks.

Waterproofing materials are also very important, and it is better to choose waterproof coatings with strong crack resistance. It can be used to pave the whole body to strengthen the carcass crack resistant cloth within 20cm of the floor and wall. For the problem of high floor drain that is common in residential buildings, the ultra-high part of the floor drain can be cut off and polished with a professional machine, and then the pipe root is cleaned up, and the pipe root is waterproofed with plugging spirit or water leakage.

4. Waterproof coating construction.

The first time the bathroom waterproof coating is used, the waterproof material is high-elastic thick acrylic HCA-100, dilute with a small amount of water, stir evenly, and begin to paint the wall. After the wall is brushed, use scissors to cut the anti-crack cloth 20 cm wide, and start to lay the standing wall cloth. Take care to minimize wrinkles and hollowing when spreading.

After we bought a house, the most worrying thing is the decoration, and the most important thing in the decoration is waterproofing, so I will talk about itHow to do waterproofing in the bathroom of the new houseSome questions.

1. The first step of brushing the waterproof coating is to ensure that the paint on the construction site is clean and dry, impermeable to the paint, not leaked, and the base is solid, no cracks, no bubbles, and no overflow. The brush height is constant and the thickness is required to meet the requirements of the product.

2. The second brushing of waterproof coating, note that a certain time interval is required, and the dry coating after the second waterproof coating can be carried out after the second coating, and the coating can be done, and the specific time depends on the specific time. If the interval is too short, the waterproof effect will be greatly reduced.

3. Lay a protective layer, in order to prevent the destruction of the bathroom waterproof layer after construction, it is necessary to cover the protective layer of the waterproof layer. The protective layer must be completely covered with a waterproof layer, and the basic layer must be firm, without cracks, bubbles, and without falling off.

How to do waterproofing in the bathroom of the new houseClosed waterproof, the water should be turned off during the test, the ground point water line shall not be less than 2 cm, at least 24 hours, and no leakage shall be observed after counting. If there is a leak, you need to redo it and don't ignore it.

5. Treatment, cleaning, leveling layer, adhesive layer, additional layer to cover simple silver details, waterproof acrylic layer, water storage test, protective layer construction, test secondary water storage.

1. Before waterproofing the bathroom, pay attention to the cleanliness of the primer, and there should be no dust, remover and other sundries.

2. Before waterproofing the bath, special treatment must be carried out on the drainage holes, pipe roots, yin and yang corners and some hollow holes. In addition, the cement mortar in the floor must be leveled before it can be waterproofed to avoid leakage.

How to do waterproofing in the bathroom of the new houseThe walls must also be waterproof. Waterproofing must be carried out on the floor at these locations to prevent water from leaking to about 30cm above the wall. If the bathroom wall is a light wall, the entire bathroom wall must be impermeable.

You can get it for free