-
Anonymous users2024-02-11Aerial work qualification refers to the work carried out by people at high places based on a certain positionThe so-called aerial work usually refers to working at height.
China stipulates that enterprises engaged in high-altitude work must obtain high-altitude work qualifications.
The operation at the Gaoheng commesis is carried out at a high place where there is a possibility of falling 2m or more from the fall height datum. According to this provision, the scope of the construction industry involving high-altitude land industry is quite extensive.
When working in a building, if the operation is carried out on a shelf of more than 2 meters, it is considered to be working at height.
Characteristics of basic types of aerial work
The high-altitude operation in building construction mainly includes five basic types, such as edge, hole, climbing, suspension, and crossing, and these types of high-altitude operations are high-altitude work accidents.
The main location where it may occur.
Edge operation refers to: construction site.
Work at height when there is no enclosure facility on the edge of the middle working face or the height of the enclosure is less than 80cm. The operating conditions belong to the edge operation: around the foundation pit, unprotected balconies, material platforms and picking platforms, etc.; Unprotected floors and floor perimeters; unprotected staircase openings and flight openings; Derricks, construction elevators.
and scaffolding, etc., on both sides of the passage; A variety of vertical transport unloading platforms.
of the perimeter.
-
Anonymous users2024-02-10Hello, how much is the company's high-altitude work qualification certificate.
-
Anonymous users2024-02-091. High-altitude operations belong to special operations, so they must be certified to work. Special operations personnel.
Must pass the special safety technical training and assessment, and obtain the "Special Operation Certificate of the People's Republic of China".
Hereinafter referred to as the special operation certificate), you can start the job.
2. Personnel working at high altitude are required to weigh less than 70 kg.
3. Suffer from fear of heights and high lead blood pressure.
People with heart disease and other diseases are not allowed to work at heights.
4. Stop working at heights for people who are overtired, lack of energy and depressed.
5. It is strictly forbidden to engage in high-altitude work after drinking.
6. Equipped with safety helmets according to actual needs.
safety belts and related labor protection articles; No high heels, slippers or barefoot work; If you are working at a high altitude in the air, wear soft-soled non-slip shoes. Scaffolding is not allowed.
Or take the material well frame hanging basket up and down, and it is not allowed to jump up and down from a height.
7. Suspension operation enterprises at heights, suspension equipment leasing enterprises, suspension operation equipment installation and maintenance units must obtain provincial municipalities.
or the provincial safety production supervision and management department recognized the "Jiangsu Province Hanging Work Safety Qualification Certificate".
Hereinafter referred to as the "Safety Qualification Certificate"), in order to engage in high-altitude suspension operations and the rental, installation and maintenance of suspension equipment.
8. Safety training and assessment system for operators and equipment installation and maintenance personnel.
-
Anonymous users2024-02-08Summary. Hello, aerial work belongs to the special industry. The "Insurance Industry Occupational Classification Standards" divides occupations into six categories, of which 5-7 categories are high-risk occupations, while aerial work belongs to the fifth category of occupations, which are relatively high-risk.
Due to the high probability of accidents for people engaged in aerial work, many insurance companies refuse to underwrite, especially accident insurance products. In order to solve the problem that high-altitude workers do not get accident protection, therefore, the high-altitude accident insurance came into being.
Hello, aerial work belongs to the special industry. The "Insurance Industry Occupational Classification Standards" divides occupations into six categories, of which 5-7 categories belong to high-liquid sales risk occupations, while high-altitude work belongs to the fifth category of occupations, which are relatively high-risk. Due to the high probability of accidents for people engaged in aerial work, many insurance companies refuse to underwrite, especially accident insurance products.
In order to solve the problem that high-altitude workers cannot get the protection of accidental troubles, therefore, the insurance of high-altitude accident insurance came into being.
-
Anonymous users2024-02-07Summary. Dear, your question has been, if my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress.
If you feel that my answer is still satisfactory, if you have any follow-up questions that need to consult me, you can click on my avatar for one-on-one consultation.
Finally, I wish you good health and a good mood!
What kind of work does aerial work belong to in the construction industry?
Dear, it takes some time to type, please wait patiently!
Hello, the high-altitude operation in the construction industry belongs to the special operation and the climbing and erection operation.
The "Occupational Classification Standards for the Insurance Industry" divides occupations into six categories, of which 5-7 categories belong to high-risk occupations, and high-altitude cong kuanyu operations belong to the fifth category of occupations, and the risk is relatively high.
Dear, your question has been, if my answer is helpful to you, please also give a thumbs up (in the lower left corner of the evaluation of the bend hall), looking forward to your like, your hard work is very important to me, your support is also the driving force for my progress. If you feel that my answer is still satisfactory, if you have any follow-up questions that need to consult me, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a happy mood!
-
Anonymous users2024-02-061.Edge jobs.
Edge operation refers to: in the construction site, there is no enclosure facility on the edge of the working face or the height of the enclosure facility is less than 80cm.
2.Hole operation.
Hole operation refers to: the operation next to the hole and the opening. The short side of the floor, roof, platform, etc. in the horizontal direction is less than 25cm (the one that is larger is called the hole, and the other thing is called the hole, and the other thing is called the hole.
On the vertical plane perpendicular to the floor and ground, the height is less than 75cm is called the hole, and the height is equal to or greater than 75cm, and the width is greater than 45cm. All high-altitude operations on the edges of holes such as pile holes, manholes, trenches and pipes with a depth of 2m or more belong to hole operations.
3.Climbing assignments.
Climbing operation refers to the work at height carried out under the climbing conditions of socks with the help of climbing facilities on building structures or scaffolding, or using ladders or other climbing facilities.
4.Suspended work.
Suspended operation refers to high-altitude operation in the surrounding airy state. It is characterized by working at height under the condition that the operator has no foothold or no firm foothold.
5.Cross-work.
Cross operation refers to the simultaneous operation of high places at different levels above and below the construction site in the state of spatial penetration.
Enterprises need to have the following four levels of talents: Each position of the enterprise will set basic needs, such as academic qualifications, which is the first checkpoint for enterprises to screen talents. Therefore, usually your academic department has already told you what kind of job you can look for. >>>More
Activity-based costing (ABC) is a costing method that adds a unit of accounting, activity, between an enterprise's resources and a company's products, to make a product or provide a service"Assignments", while the job consumes enterprise resources, and the consumed enterprise resources constitute costs. The basic idea of this method is to construct a way to reasonably and correctly allocate overhead costs to the company's products, services or other cost targets, and at the same time price existing products, new product pricing, cost reduction, and even operation management (e.g., quality, capacity, operation, process). >>>More
Loyalty to the enterprise, the first thing is to abide by all the rules and regulations of the enterprise, which is the obligation of each of our employees, and should be taken as the code of conduct for our work. For example, as far as our cargo station branch is concerned, there are many rules and regulations for safety, if an employee does not comply with the safety system in a certain link, it is likely that not only will they suffer physical damage but also make the company suffer a certain loss, at this time, how can it be said that it is loyal to the enterprise, so the loyalty to the enterprise should start from the most basic compliance with all rules and regulations. >>>More
Businesses that need to keep accounts:
First, the tax authorities require enterprises that must establish rules and regulations; >>>More
With a pattern and vision, it is in a leading position in the industry and has been developing. The internal management is also very humane, which can take into account the difficulties of employees and give them some spiritual comfort in a timely manner. Because such a company not only has a future, but he also loves his employees.