The practice of benches and tables, the method of making benches

Mostly square tables or round tables! Draw first!

The steps to make a table are as follows:

1. First of all, we can determine the size of the table according to the size of the board, and then use the cutting machine to cut the board according to the ruler designed by ourselves.

2. Cut the old wooden board into four table legs and a tabletop, and ensure that the height and size of the four table legs are the same.

3. After cutting, we can use air nails to connect all the cut table legs and the table top together and fix them.

4. If the desktop is not good, you can use sandpaper to smooth the uneven part of the desktop, and then paint the desktop with brown paint, after the paint is dry, rub it with sandpaper to make the surface of the desktop smoother, and finally apply a layer of varnish to complete.

The production method of the bench is described in detail as follows:

1. Draw a design sketch first, saw, drill, install, the specifications of the stool should be tailored to the shape of the saw, first of all, the bench pattern we designed should be drawn on the prepared wooden board according to the size and then start cutting.

2. Make the two-way oblique tenon of the slope of the bench foot of the bench bench, the mortise and tenon joint of the bench surface and the foot of the bench is difficult, the chisel method of the eye of the bench surface is for novices, it is best to chisel a model on both sides according to the size of the drawing line, drill through the hole with a small drill bit, and then mill it once with a large drill, and finally mill the eye with a chisel, so as to ensure accuracy.

3. When making the stool foot sawing, we use a hand saw, when sawing wood, the right hand holds the saw hand, the tip of the saw tooth is downward, and the wood is pressed on the work bench with the left foot to prevent the wood from jumping up and down or moving left and right.

4. When sawing down, it should be slow and then fast, when the wood is about to be sawed, use the left hand to hold the wood that is ready to be cut down steadily, so as to prevent the wood from tearing along the wood grain or regretting the lack of falling and hurting the foot surface. The tenon of the stool leg and the cross bar are all one-shoulder oblique tenons, as long as the line is drawn correctly, it is not difficult to make.

5. The side of the assembled bench surface and the toes should be in the same vertical line or the toes out of a little better, to the bench surface to play a cautious eye, to grasp the angle of the two-way slope of the mortise, not skilled to play slowly, through the tenon on both sides of the remember to change the angle, after the installation of the bench surface through the tenon on the wooden wedge.

6. The bench does not need to be confined to the basic size of the case, but should be determined in accordance with the requirements of use and ergonomics.

Here's how to make a wooden bench:

Prepare materials and tools: pens, sawn wood, hand saws, electric drills.

1. Draw design sketches, saw, drill, and install first. The bench pattern designed by the root saw should first be marked according to the size on the prepared plank, and then start cutting.

2, the production of bench bench stool foot slope of 5:1 two-way oblique tenon, bench surface and stool foot mortise and tenon joint production has a certain degree of difficulty, the chisel method of the eye of the bench surface for novices, it is best to chisel a model on both sides according to the size of the line, drill through the hole with a small drill bit, and then mill it once with a large drill, and finally mill the eye with a chisel, so as to ensure accuracy.

3. When making stool foot sawing, a hand saw is used. When sawing wood, hold the saw hand with your right hand and press the wood against the workbench with your left foot to prevent the wood from jumping up and down or moving from side to side.

4. When sawing, it should be slow and then fast, when the wood is about to be sawed, hold the wood to be cut with the left hand to prevent the wood from tearing along the wood grain or falling and hurting the foot surface. The tenon of the stool legs and the cross bar are all one-shoulder oblique dregs.

5. The side of the assembled bench surface and the toes should be in the same vertical line or the toes should be a little better, and it is better to make an eye on the bench surface, and grasp the angle of the two-way slope of the mortise and tenon. Remember to change the angle when beating the tenon on both sides, and then put a wooden wedge on the tenon on the bench surface after installation.

6. Polishing it at the end.

1. Skills for making benches:

1) It is mainly divided into, design and drawing - material selection and material selection - blanking and batching - net material and marking - drilling and tenon opening - tenon cutting and shaping - assembly and calibration - cleaning and grinding.

2) The appearance of the small bench is shaped into a small rectangular design, with full and smooth lines, giving people a visual effect with a good texture. It is necessary to retain the natural texture of the raw materials, which is natural and beautiful, and exudes a strong fashion atmosphere in the fine design.

3) The net material is not in the light, and the final finishing wood is required to be straight, flat, consistent in size, and accurate in right angles. In the process of purifying the material, the two datum planes of the wood used should be selected at the end, and the single ink line of the intersection should be prepared for the next step.

4) Punching and slotting, punching and slotting according to the design drawing. Molding, cutting and refurbishing the material plate to meet the requirements of the design standard. This is a pair that completely relies on mortise and tenon joints, which can be assembled and disassembled without glue, and can also ensure a certain firmness.

2. What kind of wood is used to make a bench:

1) Ash.

The compressive strength, static bending strength and tensile strength of the grain are very large. Ash wood is mainly used to make luxury furniture, easy to cut tools, polished, and resistant to decay. The compressive strength, static bending strength and tensile strength of the grain are very large.

The appearance of ash wood is similar to that of European locust wood, and the heartwood varies from light brown to dark brown. The wood grain is pronounced and coarse-grained. Uses high-end furniture, flooring, moldings, fine woodwork, sports equipment, tool handles, etc.

2) Oak. The material is solid, the texture is fine, the material color is brown and red, and it is used for furniture and farm tools. It is produced in the provinces and regions south of the Qinling Mountains and the Yangtze River.

It is also distributed in North Korea and Japan. Quercus alba is an evergreen shrub or small tree, a national second-class precious tree species, and a major secondary forest tree species in the forest area of Northeast China.

Summary. I have received your question, Weiwei needs a little time to type, please wait for me, please don't end the consultation, I may reply a little delayed I hope you understand, thank you for your strong cooperation, Weiwei is back to you immediately, thank you for your cooperation here, you can also provide more effective information, so that I can better answer for you. Thank you in advance here, if you can still trouble giving me a thumbs up, life is not easy.

I have received your question, Weiwei typing takes a little time, please wait for me for a while, please don't end the consultation, I may reply to a delay in a cherry search and hope you understand, thank you for your strong cooperation, Weiwei came back and immediately replied to you, thank you for your cooperation here, you can also provide more effective information, answer so that I can better answer for you. Thank you in advance here, if you can still trouble you to give a thumbs up, life is not easy to clear the Song Bureau.

1 6 Planks according to the dimensions of the drawings of their own design, sawn into the material for making the planks. 2 6. The sawn planks are placed together first to check whether the size is appropriate. 3 6 Now that the planks are sized, we move on to assembling the stool.

4 6 Use a knife to scrape the liquid to remove the excess glue, and then use sandpaper to polish the board to remove the hair on it. 5 6 To make a wooden bench, you need five wooden planks corresponding to the four sides and the ground, first use a hand drill to hit a few eyes, and then use nails to stare at the trouble. 6 6 Then brush the paint with a brush and set it aside to dry.

If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. If you feel that I am satisfied with the answer of Fu Lu, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!