4. Why is the Internet speed more than 200 when looking for broadband?

1byte=8bit

8bit (bit) second (second) = 1byte (byte) s (second) is now popular.

512bit s broadband, 512bit s=64kbyte s1mbit s broadband, 1024kbit s=128kbyte s2mbit s broadband, 2048kbit s=256kbyte s8mbit s broadband, 8192kbit s=1028kbyte s Of course, ADSL operators use different standards of central office ports, and the synchronization rate of the user side is slightly different. You can enter the ADSL cat (generally supports IE mode) to see the synchronization rate directly.

There are other factors such as loss, such as 2Mbit S broadband, the theory is 256kbyte s, but in fact, if it is above 200 220kbyte s, it is normal, and the speed of P2P cannot be used as a reference.

Detect with ping.

1. Run "ping".

t"---Routine**.

3. Run "ping broadband operator dns -t.""--- should be the most stable.

If there is a router, restore the stand-alone state first, and then try again.

All 3 command windows are open.

It's not good, report for repair.

Good, 2 bad, game server issue.

Not good, 3 good, report for repair, but I hope that the operator's maintenance personnel understand this problem or not fool you.

It is recommended to change the brand** to try the speed, some small** limit the speed.

Friend, it depends on what you are doing, the speed is more than 200, 4m does not mean that your **speed can reach 4m, that only means that your bandwidth is 4m, and the normal ** speed of Netcom with 4m bandwidth is 450-550kb s

Summary. The 4M mentioned in the handling is just a theoretical network speed, in ordinary use, it is usually not up to the theoretical network speed, especially during the peak hours of the network, the network speed will become slower, you can avoid the peak period of the network and then test.

If you still find that the internet speed is not ideal, you can optimize it by using the following methods:

1. Turn off the wireless function of the router, and the network speed will be increased accordingly.

2. Before the test, you can clean up the computer, optimize some software, and close the background programs that you don't need.

A user reported that why is my internet speed different from the bandwidth of my office? I ran 4M broadband, but why did I test only more than 200K network speed? Did telecom deceive me? Didn't drive me 4m.

The 4M mentioned in the handling is just a theoretical network speed, in ordinary use, it is usually not up to the theoretical network speed, especially during the peak hours of the network, the network speed will become slower, you can avoid the peak period of the network and then test. If you still feel that the network speed is not ideal, you can optimize it by the following methods: 1. Turn off the wireless function of the router, and the network speed will be improved accordingly.

2. Before the test, you can clean up the computer, optimize some software, and close the background programs that you don't need.

In addition, routers, network lines, etc. will also slow down the network speed to a certain extent.

Just replaced with 20 trillion fiber, it needs to take effect the next month, that is, at the beginning of the next month, the fiber optic modem will be powered off for 5 minutes, and then reconnect to the broadband, turn on the 360 guard, broadband speedometer, and then speed test.

Uplink (Upload):

If the fiber broadband speed test does not meet the standard, it is recommended that you rule it out for the following reasons:

1) The user needs to have a gigabit network card and optical modem on the PC side of the computer, such as a wireless router used in the home, the wireless router needs to support the gigabit rate.

2) If the modem does not support Gigabit, you can consult the Gigabit modem at the business hall.

If the old broadband is upgraded, it is recommended to test it the next day after the upgrade, and if the new broadband is so, find customer service.

Retest and close all other programs. If it is no longer 20m, complain about telecommunications.

Causes of slow network speed: software, system viruses, the impact of using routers, and line aging. You can analyze the processing according to the type:

2.Log in to the game: It is recommended to use the China Unicom server area.

To check whether the firewall is set correctly, we recommend that you disable the firewall test. 5.If there is a virus in the computer, it is recommended to check for viruses.

6.The extension is installed, the connection route is connected, and a single-wire connection attempt is recommended. 7.

Network congestion during peak hours, it is recommended to avoid using it during peak hours. 8.You can optionally change the duplex mode of the NIC.

The broadband has been upgraded to 200 megabytes, why the network speed.

But it didn't reach 200 trillion? There are 2 reasons for this.

Hello, the theoretical speed of 4 trillion is about 500kb, and the situation you said about 200 first depends on whether you are detected normally, if you are based on a royal old ** data to see whether the server itself can meet your maximum **speed. Secondly, if you are using a speed test tool, you also need to see if there are other processes that divide your internet speed evenly during the speed test, resulting in errors. If you are sure that you have ordered a bandwidth of 4M, but there is really only a bandwidth of 2M, then contact the operator to solve it.

It is also necessary to remind that if you are not a fiber brazing user, it is not surprising that the bandwidth of 4M is more than 300 and 400kb, after all, the fiber brazing will be more stable.

Reasons for slow internet speeds:

The problem at the time of 2 business reception desks.

3. In the case of business acceptance, the quality of the line is a problem.

4. In the case of business acceptance, the port rate is not up to standard, or the port is aging.

The solver grasps the missing case and starts grinding:

As for 2, 3, 4, you can only report repairs.

It depends on how you measure the speed, the speed of the general 4m broadband can reach nearly 500kb s, the speed of the copper wire is not very stable, the maximum carrying broadband speed can be 4m, and the normal speed can be about 300kb s. At the same time, it is also related to the time period when you are online, for example, if you use the Internet during peak hours, the network speed can be imagined to be not fast. It is still recommended that you use optical fiber, after all, the optical fiber will be more stable.

And Mingfeng potato now Unicom Telecom has a free speed increase, after you change to optical fiber, and then through the Unicom Wokuan client can also be upgraded to the expected 20M broadband for free. I don't know much about how the Thriller letter speeds up, because I'm using Unicom...

**Speed is not just to look at your hole to get the width of the index, but also to see whether your**source is the speed limit, for example, a six-lane highway, just you have a car, but you are driving a tractor hunger and trembling machine, the speed still can't go up, it may be that your ** file source speed limit, drive to a maximum of 200kb seconds.

If a single person uses a 4M Internet speed, basically all Internet access operations are stress-free (the actual Internet speed is less than 4M, and the actual maximum Internet speed should be between).

Founded in 2002, China Telecom Corporation is a large state-owned communications enterprise in China, a global partner of the Shanghai World Expo and the Guangzhou Asian Games, and has been selected as one of the "Fortune 500 Enterprises" for many years, with a registered capital of 158 billion yuan. It is mainly engaged in fixed information, mobile communications, satellite communications, Internet access and applications and other comprehensive information services.

China Telecom Broadband is the general name of China Telecom operators to provide access to Internet services to telecom users, and presents it to users under the unified service brand of "e Broadband", providing users with seamless coverage of broadband access services through a unified e Broadband client.

Wireless broadband is China Telecom's WiFi, e-Surfing 3G, CDMA1X network based on the wireless high-speed Internet service, you can use the Wifi network card and 3G data card on the computer, use the unified wireless broadband client software, choose WiFi, e-Surfing 3G, CDMA1X network access to the Internet, enjoy high-speed wireless Internet access services and rich network services.

China Telecom Chengdu Branch signed a strategic cooperation agreement with Sichuan Aipu Co., Ltd., realizing a strong alliance and launching the cooperative brand Rongyi Broadband on December 30, 2009, creating a precedent in the industry.

1. The wireless router has not set a password to steal resources, it is recommended that you set a password on the router to prevent the network from being stolen.

2. There is a problem with the wireless router, it is recommended that you try a different router.

3. If there is a virus in the computer, it is recommended that you give the computer a full antivirus.

4. The connector of the network cable is loose, it is recommended that you check the network cable and connector.

If the above reasons are ruled out, it is recommended to call 10000 and ask the maintenance personnel to overhaul you.

We apologize for any inconvenience caused.

Anhui Telecom will serve you wholeheartedly, I hope mine can get yours.

If you have any questions, you can consult the staff in the online business hall of Anhui Telecom, and Anhui Telecom has officially opened 4G services.

You can go to the online business hall to check the details, I wish you a happy life!