How to turn off Huawei phone photo display 1X?

It is the magnification of the camera, which is the original size, and you can click on the icon or put two fingers on the screen diagonal.

Slide adjustment.

You can press and hold on an empty space on your phone's screen, any home screen. Wait a minute, you can see that each home screen is in a state, and there is a cross at the top right of each home screen, you can delete the ones you don't use, and of course you can add them. You need to concentrate the icons on one screen, and then the empty screen will appear "".

will light up. The oil indicator is used to show the oil stock and pressure in the engine, and its color is mainly red or yellow, twist the key, the indicator will also light up when the vehicle conducts self-inspection, and the indicator will automatically turn off after starting the car.

If the indicator light is always on, the reason is that the oil stock and pressure are lower than the standard value, the red light of the oil pot on the instrument is lit, if it is not a sensor failure, it is generally the lack of engine oil in the engine, and continue to drive in the absence of oil, which will cause the piston to break the cylinder body, and there is a danger of stalling.

Sogou asked. Extended Materials.

The cause of the oil lamp alarm.

1. The oil volume of the engine oil is insufficient, so that the oil volume of the oil pump is reduced or the pump cannot be oiled due to air intake, resulting in the oil pressure dropping;

2. The engine temperature is too high, which is easy to thin the oil, and a large amount of oil pressure is lost from the mating gap, resulting in a drop in oil pressure;

3. When the oil pump parts are damaged or the gap is too large due to wear and assembly, it will cause the failure of the oil pump not producing oil or insufficient oil output;

How to turn off the Huawei phone to take photos to show the spine of the pants First turn on the camera on the desktop of the phone. 2. After entering the camera photo interface, you can see that the angle is 1x by default, click the point that allows the seepage surface. 3. The wide-angle mode has been turned on, and the pure collapse can be turned off!

Taking Huawei nova5 mobile phone as an example, the system version is, the method of turning on the wide angle is: 1. First turn on the camera on the desktop of the mobile phone. 2. After entering the camera photo interface, you can see that the default angle is 1x, click the dot below.

3. The wide-angle mode has been turned on, just turn it off!

Summary. Hello, you said that you are showing 1x when taking a photo, which means that you are currently using 1x zoom, which is the normal default zoom factor.

Hello, you said that you are showing 1x when taking a photo, which means that you are currently using 1x zoom, which is the normal default zoom factor.

Just like the one on my **.

If you magnify it, it's not 1x.

This is just the effect of display.,I don't support turning it off.。