How to get car glass water, how to use car glass water?

High-quality glass water is made of deionized water and various environmentally friendly additives, which has the functions of decontamination, anti-freezing, anti-static, anti-corrosion and so on. Because glass water is a consumable product in the use of automobiles. Buying ordinary glass water, the effect is not up to standard, and it may also cause the nozzle to clog.

1. Spring. The wind and sand are heavy and the rain is abundant, so the main function of glass water is to clean the windshield.

Prepare a liter plastic bottle and be sure to rinse well. 2 liters of purified water, 250ml of medical 95% alcohol (available in pharmacies), 1-2 caps of detergent (detergent quality should be good), fully mixed and ready to use. The main purpose of adding detergent is to remove sand, and the foam of detergent can quickly remove the soil but not too much, and it is difficult to rinse off too much foam.

Alcohol accelerates water evaporation and allows the glass to clean quickly. Add the above, may not be satisfied, you can directly add about 1 liter of pure water.

Similarly, liters of plastic bottles, 2 liters of purified water, 500ml of 95% medical alcohol, and 1 bottle cap of detergent are sufficient. Alcohol, an organic solvent, is still very good, and the effect of shellac is very good. If you are in an urban area, you can fill the dissatisfied kettle with pure water, but it is not recommended to reduce the concentration at high speed, which will affect the effect.

3. Winter. Considering that the northern city can reach -30 or even lower in winter, there are many car owners who directly add two pot heads, which can basically meet the needs, but the alcohol content directly affects the aging degree of plastic parts, so it is better to improve.

20% quality of 95 degree alcohol, 80% quality of water, the freezing point is basically around -10, no problem in early winter. 20-30% alcohol, 60% water, the freezing point is only -15, which is not very ideal, 40-50% alcohol, 50-60% water, the freezing point can reach -25 without freezing, basically to meet the needs of winter, because in winter it is basically not much water to clean the glass. Crucially, you must not fill up your glass kettle in winter.

The vents on the lid are easy to freeze, and the frozen and swollen liquid will directly burst the kettle. So one bottle of solution prepared in a plastic bottle in winter is enough.

It should be noted that the detergent cannot be replaced with laundry detergent and may cause sedimentation. The alcohol content should not be too high, as it will affect the aging of plastic objects.

1. Spray this product on the removed parts, soak them for 2-3 minutes, wipe them with a soft cotton cloth or directly wipe the removed parts with a soft cotton cloth dipped in the cleaning solution until they are translucent;

2. If heavy dirt is used, it can be cleaned repeatedly, rinsed with water, and wiped dry and bright;

3. After dilution, this product can be directly injected into the vehicle glass cleaning water tank and sprayed with the vehicle;

4. For example, anti-freezing and anti-fogging in winter can be used with "anti-fogging agent for automotive glass".

Cleaning the sprayer: Remove the sprayer, wash it with clean water, and dry it with a clean towel.

Clean the motor: Remove the motor, clean it with clean water, and dry it with a clean towel.

Replace the glass water: Use high-quality glass water and avoid using low-quality glass water.

Check the motor: If the motor has a buzzing sound or is not working, it is advisable to send it to a professional for inspection and repair.

Use the correct operation method: Do not add new glass water immediately after the glass water is used up, and the glass water sprayer should be allowed to rest for a period of time to avoid excessive wear and scaling.

Fill the glass water into the glass tank located in the engine compartment and the filling water level cannot be less than the lowest water level of the scale and cannot exceed the optimal water level of the scale. Once filled, the wiper lever is pulled inward, and wiper water is sprayed out of the spout onto the front windshield.

Glass water is generally divided into three kinds, one is used in summer, there are more insects in summer, and the glass water contains shellac, which can quickly remove the corpses of mosquitoes on the glass; One is used in winter, the temperature is low in winter, and the glass bucket is sold with anti-freezing Tanzhen substance, which can also be used when the outside temperature reaches minus 20 degrees; Another is suitable for use in cold areas to prevent car glass from freezing.

The main function of glass water is to clean and prevent freezing, in addition to anti-fog, antistatic, lubrication, and anti-corrosion.

Millions of car purchase subsidies.

How to make your own car glass water? How to make your own car glass water? In spring, the wind and sand are rainy, and the main function of glass water is to clean the windshield.

Prepare a liter plastic bottle and make sure to rinse well. 2L of pure water, 250ml of medical 95% alcohol (pharmacy**), 1-2 bottle caps of detergent (detergent ***), can be used directly after full mixing. Detergents are mainly used to remove sand.

The foam should be quickly dusted off, but not too much. Too much foam is hard to clean. Alcohol accelerates the evaporation of water, allowing the glass to clean quickly.

If you are not satisfied with the above, you can directly add about 1 liter of purified water. 2. In summer and autumn, more solvents should be added. Rainwater may not be very dirty, but when insects play on the windshield, it is difficult to remove with clean water because shellac is difficult to handle, so add more solvents.

Again, a liter of plastic bottle, 2 liters of purified water, 500 ml of 95% medical alcohol, 1 cap of cleaner is enough. Ethanol is an organic solvent with a good lifting width, which has a good effect on the removal of shellac. If it is in the city, you can fill the unsatisfactory kettle with pure water, but it is not recommended to reduce the concentration at high speed, which will affect the effect.

3 Winter glass water winter, it is believed that in northern cities, the temperature in winter can reach -30 or even lower. Many car owners directly add two pot heads, which can basically meet the demand, but the alcohol content directly affects the aging degree of plastic parts, so it is best to improve it. 95% alcohol 20%, water quality 80%, freezing point is basically around -10.

No problem in early winter. The freezing point of 20-30% ethanol and 60% water is only -15, which is not ideal. The freezing point of 40-50% alcohol and 50-60% water can reach -25 without freezing, which basically meets the needs of winter, because there is very little water to clean glass in winter.

The point is that we can't fill glass jars with laughing Zen water in winter. The vents in the lid can easily freeze, and the frozen swollen liquid will freeze the kettle directly. So a plastic bottle of solution in winter is enough.

It is important to note that laundry detergent is not a substitute for dish soap and may cause sedimentation. The alcohol content should not be too high, otherwise it will affect the aging of plastic products. @2019