What are the precautions when purchasing plastic containers?

First of all, let's talk about what are the types of plastic containers? According to the packaging requirements of the industry and environment used in the turnover box, it can be divided into the following categories: anti-static turnover box, conductive turnover box, flame retardant turnover box, food-grade special turnover box, high temperature resistant turnover box, conventional material turnover box.

These are developed on the basis of the original turnover box, with different uses, but they occupy a certain market share!

What are the precautions when purchasing plastic containers? As a basic tool for logistics, plastic turnover boxes are widely used in all walks of life, but many enterprises are not fully aware of some of the characteristics of plastic turnover boxes, and they often choose the required turnover boxes according to the size of the box. However, as a professional manufacturer, we should understand some special requirements of users for products, so as to correctly guide customers on how to choose the appropriate plastic turnover box on the basis of choosing the appropriate size.

From the most basic point of view, it is better to choose the most appropriate size, but with the development of the logistics industry, the logistics mode of each industry is gradually integrated into relative standardization, such as: tobacco, postal, automobile and other industries, the requirements of these industries for plastic turnover boxes have changed greatly, and reasonable selection can save logistics costs and reduce inventory funds, sites, etc.

As for what should be paid attention to when wholesale plastic turnover boxes? Don't order from some informal manufacturers, I'm afraid that if the goods are not as you wish, the gains outweigh the losses. Choose a regular manufacturer, the quality is guaranteed, and it will be relatively affordable, because large manufacturers, the equipment they use are forming molds, and the technology is also mature, which can avoid some waste.

With the development of the logistics and warehousing industry, plastic turnover boxes as an important storage and handling tool have also attracted more and more attention, we should pay attention to the following points before buying plastic turnover boxes. Look at the material. There are three types of materials:

New materials, ordinary materials, all old materials. New materials, so the name suggests, are pure new raw materials purchased from raw material manufacturers. Old material, also known as recycled material, is 100% of the first old plastic.

Ordinary material, which is the most widely used material, is made of new material and old material according to a certain ratio. Many plastic turnover box manufacturers like to promote this kind of ordinary material, customers in the past to inquire, if not special instructions, theirs are ordinary materials. Some small factories directly sell ordinary materials as new materials, which is difficult for customers to distinguish and prevent it.

One HDPE (low voltage).

Advantages: shiny, hard, flexible, strong resistance, suitable for heavy products (e.g., stacked high) Disadvantages: easy to deform, cold resistance and heat are not very good.

2. PP (copolymer) material production

Advantages: good stereotype, not easy to deform, strong flexibility, strong resistance, cold and heat resistance.

Disadvantages: matte, white spots after use, neutral hardness (too heavy, stacked height is not suitable, thicker boxes should be considered).

Plastic boxes are widely used in electronic auto parts, electrical appliances, plastics, hardware, packaging, machinery, light industry, postal services, food, medicine, advertising, decoration, shoes, stationery and other industries.

Generally, it is HDPE (high-density polyethylene) and PP (polypropylene).

Qingdao Guanyu Industrial Equipment Co., Ltd. is the earliest domestic production of shelves, plastic pallets, plastic turnover boxes, plastic parts boxes, multi-functional material boxes, wire rod flexible systems, tool cabinets, tool carts, work tables, tool carts, tool cabinets, logistics trolleys, material finishing racks, lockers, silent carts, turtle carts, warehouse cages, aluminum alloy ladders, glass fiber insulated ladders, intelligent three-dimensional circulation containers, intelligent lifting three-dimensional containers and other series of warehousing and logistics products professional manufacturers, over the past few years, The company has gradually expanded its production scale according to market needs, and has become the largest manufacturer of warehousing and logistics products in northern China.

PE material. The turnover box products produced by Cixi Zhedong container have attracted much attention in the logistics industry and have been widely used, including product storage, product turnover and transportation in logistics and transportation plants, and the storage and transfer of logistics facility parts, tools, accessories, etc., which can help cooperate with the generalization and integrated management of logistics containers, and are important demand products for modern logistics management of production and circulation enterprises. Turnover box procurement；Web Links.

Features of plastic turnover boxes produced by our company:

1. The plastic turnover box is made of copolypropylene and polyethylene, which is light in weight and has a long service life.

2. The outer size of the plastic turnover box refers to the maximum size of the logistics box with a lid.

3. The size difference between the plastic turnover box and the standard concave eversion box cover is 18mm.

4. The bearing of the plastic turnover box refers to the bearing that is evenly placed within the range of adapting to the ambient temperature.

5. The effective working temperature of the plastic turnover box is -25 40.

6. Plastic turnover boxes can be stacked and stored to save space.

1. The plastic tray should be placed gently to avoid uneven force and damage when landing.

2. When placing the goods, they should be placed evenly to avoid sharp surfaces directly pressing on the bottom of the turnover box, which will be crooked or damaged due to uneven force, and more serious will damage the goods in the box.

3. When using matching pallets, we should consider whether the size of the turnover box is suitable for the use of this plastic pallet, so as to avoid the inappropriate size and improper placement of the box and the occurrence of side crooked or inverted containers.

4. When stacking is used, the load-bearing of its own turnover box should be considered, and the stacking height is the most restricted.

5.Must comply with container stowage regulations.

Precautions for the use of plastic crates:

Clause. 1. The plastic turnover box is a plastic product, and flammability is one of its characteristics, so we use this kind of turnover box when it is probably placed away from the fire source, so as to ensure the safety of the turnover box very well, and it is more conducive to ensuring the safety of the goods in the box;

Clause. Second, the plastic turnover box has a certain bearing capacity, and its bearing strength is fixed, so when we use this type of box for goods transfer and transportation, the weight of the goods can not exceed the maximum bearing scale of the box, otherwise the box will be affected by the relevant hazards due to overweight;

Clause. 3. Although the plastic turnover box has the characteristics of good resistance and strong bearing capacity, we can not deliberately damage the turnover box when using it, for example, throwing the box to the ground from a high place, or throwing objects into the box from a high place, etc., these conditions are not allowed, because such actions will cause unnecessary harm to the turnover box;

Clause. Fourth, please do not put the plastic turnover box in the sun, the strong light will cause the box to show aging, and the end will make the turnover box use life shorter.

The performance of plastic turnover boxes involves many aspects, from the perspective of the use value of modern commodity packaging, packaging materials should have the following aspects of rib performance.

1) Appropriate protection performance Protection performance mainly refers to the protection of internal products. In order to ensure the quality of the inner product and prevent its deterioration, according to the different requirements of different products for packaging, the mechanical strength, moisture-proof, waterproof, acid-resistant, etc. of the materials used in the packaging products should be studied

Alkali corrosiveness, heat resistance, cold resistance, backlight, air permeability, anti-ultraviolet penetration, oil resistance, adaptability to temperature changes, non-toxic, no ambiguity, etc.

2) Easy processing operation performance Processing operation performance mainly refers to the material according to the packaging requirements, easy to process into containers, easy to wrap paddles, easy to fill, easy to seal, high efficiency and adapt to the operation of automatic packaging machinery. In this regard, the grinding ability, stiffness, smooth skin and ease of packaging materials should be studied.

Open, cutting nailing, plasticity, n weldability, strandability, sticking (seam), coatable printability, anti-static property, etc., to meet the needs of large-scale labor and 1K production.

3) Appearance decoration performance Appearance decoration performance mainly refers to the aesthetics of the shape, color and texture of the material, which can produce display effects, improve the quality of goods, meet the aesthetic needs of different consumers and stimulate consumers' desire to buy. In this regard, the transparency of the packaging material, the surface gloss, the adaptability of the EIJ brush, and the vacuuming due to charging should be studied.

4) Convenient to use performance Fang Jiao JH performance mainly refers to the container made of cypress material to contain the product, easy to open the packaging and take out the contents when consumption, it is closed again and again and is not easy to break.

5) Cost-saving performance The packaging structure should have a wide range of rice sources, convenient materials and low cost. Cost-saving performance mainly refers to the economical and reasonable use of packaging materials, and the study of saving packaging material costs, packaging machinery and equipment costs, labor costs, packaging efficiency, their own quality, storage and transportation costs.

6) The performance of easy processing Rejection and collection processing performance mainly refers to the packaging materials to be conducive to environmental protection, conducive to saving resources, harmless to the environment, and choosing green packaging materials as much as possible. In this regard, it is necessary to study the **, reuse and recycling of packaging waste.

It can be made into a collapsible turnover box, which is very convenient and durable, choose Sino folding turnover box!

Plastic turnover box, in the application and other processes, there are also some rules required, in order to carry out standard manipulation and use, so as to avoid some inappropriate manipulation, as well as improper use, etc., as allowed, can not only improve its use of obedience, at the same time, can also play a positive role in protection. So, let's focus on it. The rules and requirements for the use of plastic turnover boxes, which are detailed in detail, are mainly as follows:

Before using the plastic turnover box, it should be cleaned cleanly, and it should be thoroughly cleaned, and there should be no dead ends, so as not to bring dust, dirt, etc. into the use of the turnover box, so as to form pollution. In addition, there should be no stagnant water in the turnover box, and it should be kept boring. Plastic turnover box, its use of the pre-inspection, is also very nervous, if, the invention has cracks, deformation or damage, then, should be repaired in real time, if, can not be repaired, perhaps, has affected its normal use, then to scrap disposal, and replace with a new one.

If, in the application process of the plastic turnover box, it is required to use special transportation things or equipment, it is necessary to select in accordance with the requirements of the rules, at this time, you can not use others at will, so as not to have adverse effects, such as damage to the turnover box, perhaps, so that it can not be used normally. When the plastic container is used, it should be placed in the designated position and cannot be easily arranged, because it will be damaged or damaged if it is allowed. If it is to be stored, then it should be carried out under suitable conditions to avoid aging, decay and other problems, which will affect its service life.

First of all, it is necessary to understand the material of the plastic turnover box, the general material is polyethylene, copolypropylene, the quality of the plastic can be roughly judged according to the color of the product, the quality of the product is good, the color is bright, there is a good luster, and the quality of the product is not good, often the color is dull, the gloss is not enough.

Secondly, according to their own needs to choose the type of plastic turnover box, according to the structure of the turnover box, can be divided into stackable turnover box, pluggable turnover box, folding turnover box, etc., different turnover boxes have their own use characteristics, such as pluggable turnover boxes can be inserted into each other when stored in empty containers, greatly reducing inventory space, improving the space utilization rate of the warehouse.

Qingdao Guanyu has been engaged in the production and sales of logistics containers since 1999, using ExxonMobil raw materials, quality assurance, and trustworthy. 】

Finally, you can press the plastic turnover box by hand to make it have a certain deformation, and the turnover box with reliable quality will generally not be damaged, and the product with poor quality will be damaged after a little pressing.

Through the identification of the above points, customers should have an understanding of the quality of the turnover box, with the enhancement of social demand, the types of turnover boxes are also increasing, customers still have to shop around when choosing, such as the same pluggable turnover box, the performance of the straight box is more superior than the oblique box, it overcomes the shortcomings of the large external space of the oblique box, and the wall of the box is thicker than the oblique box.

The plastic turnover box is produced by injection molding process, mainly to see whether all corners are done satisfactorily, whether it is easy to crack, whether the material used is not the best material, and it depends on your use conditions, if you want to freeze, don't use PP material! Box design is important!