How do I cancel the positioning when taking a photo? How do I turn off anchoring for photos?

The ** display of the geographical location taken by the mobile phone may be that the mobile phone has turned on the location label and the marking helper function, if you need to cancel, it is recommended:

1.Turn on the camera - tap the gear icon (settings) - location tab - close.

2.Open the phone photo album - click the ** - menu key - settings - mark the little helper - close.

If you want to cancel the positioning when taking a photo, you can set the settings in the camera and turn off the positioning system.

Hello this friend, first of all, you can cancel your positioning in the settings. Find your phone settings and click on Location. One tap is the anchor point, and two clicks is elimination.

If you want to cancel the location, you have to turn on your privacy in the settings bar, and there is a location in it, and you can turn this location off.

Be sure to locate it, just enter the phone's settings and click on the permission, and then cancel the positioning.

To unlocate the photo, open the camera, find the option related to the location in the settings, and uncheck it.

In fact, if you want to cancel the location when taking a photo, then you can turn off the location of the phone, so that you can't see your location.

In fact, if you take this photo positioning, you can only see it in the details of **, as long as you don't give the camera permission to shoot the position. Or give the camera a false virtual location.

When taking a photo, just turn off the GPS positioning, and the positioning will not be displayed.

This is generally in each mobile phone, and it can be canceled in the camera settings.

If you want to cancel the positioning of the photo, you can go to the settings and then cancel the positioning.

This is set in the camera, and it can be modified in the place where the watermark is set, the camera model, the time, the location, etc.

in the camera's settings.

The phone is like this.

Other equipment is not clear.

The steps to remove the positioning of the iPhone** are as follows:

First, on the screen of your phone, tap to open the "Settings" app.

2. Then in the "Settings" list, find the "Privacy" option and click to turn it on.

3. After entering the "Location Services" page, find the "Camera" option in the list and click to open it.

4. In the interface that opens, click on the option "Never", as shown in the figure below. The setup is complete.

Note: In this way, there will be no positioning for the ** shot later. However, there is still location information in the previous shooting, and if you find it inconvenient, you can delete it.

How to turn off the positioning of the mobile phone**, the next will teach you to turn off the positioning of the mobile phone**.

1. First, open the camera via shortcut keys or desktop icons.

2. Find the icon in the upper right corner of the camera and click it.

3. The open extension bar has a setting function, click Settings.

4. Finally, in the page that opens, if the ** taken by the camera has geolocation information, it means that this is also turned on by default. Click and turn off the feature, and you won't have geolocation information in the future.

The geographical location displayed in the mobile phone album can be canceled by following the steps below.

1. Tap Settings on your phone.

2. Then select Trace Yandan Privacy in the settings.

3. Then click Location Services.

4. In Location Services, select the camera below.

5. Here you can see that the camera uses location services by default, and the location information will be automatically recorded when shooting. Select Yongzi Scrambler to turn off the camera when taking photos** Automatically record location information.

If you are using an OPPO mobile phone, you can try the following old methods:

1.For ColorOS and above versions, go to the upper right corner of the camera > to set > Geolocation and turn it off.

2.ColorOS version, go to Settings > Camera > Geolocation, and turn it off.

3.ColorOS version, camera > icon in the lower right corner> settings icon > rock liter geographical location, turn off and include rubber closed.

4.ColorOS version, camera > upper left corner > swipe left > geolocation and turn it off.

When the iphone6 camera takes a photo, the ** shared **will show the location of the ** shooting yourself, if you don't want others to take the geographical location of the photo yourself.

How to do it?

1. First find and click the [Settings] icon on the iPhone6 desktop, as shown in the figure below;

2. After entering the settings page, find and click to enter the [Privacy] column below it, as shown in the figure below;

3. Then click [Location Services] at the bottom of the privacy page, as shown in the figure below;

4. Next, find and click [Camera] under the location service interface, as shown in the figure below;

5. Finally, we can see here that the default is that the camera uses location services, and the location information will be automatically recorded when shooting. Select [Never] to turn off the camera and automatically record location information when taking photos. The location of the iPhone camera settings by function is as follows:

1. Option settings for HDR function.

1. HDR, full name high dynamic range.

HDR will merge three photos of different degrees into one with the best effect, that is, the system will synthesize them through a certain program algorithm. In the phone's settings, we can leave the HDR settings as normal. On your iPhone's home screen, open the Settings icon.

2. In the settings list, click to open the "** with camera" option.

3. Then at the bottom of the ** and the camera settings limb malfunction notice, you can see the "Keep Normal**" option. If it is turned on, when we enable the HDR function, taking one photo will generate two photos.

4. When we turn on HDR to keep normal**, we will see two identical ** in **.

2. Camera interface settings.

1. After turning on the camera, click the "Lightning" icon in the upper left corner to set the status of the flash, which is automatic, on and off.

2. Click HDR on the top of the camera to set the status of HDR, and there are also three states: automatic, on and off.

Second, the use of the Apple mobile phone camera.

1. Use the camera to adjust the focal length. Select the object you want to shoot and tap the image in the frame with your finger"Autofocus"will also appear below"Adjust the focal length"of the drag bar. If you feel that the effect of shooting vertically does not meet your needs, you can flip the camera horizontally, and the options page will be reversed.

2. Use the camera to focus. There are two ways to focus on iPhone, the first is camera autofocus, which does not require human intervention. The second is to focus manually according to your needs.

To manually focus, click with your index finger on the frame and focus on the object you want to focus. to complete the coke.

The steps are as follows:

Turn on your iPhone, find the "Settings" icon, and tap to enter;

Find the "Privacy" item in the "Settings" page;

After entering "Privacy", find "Location Services", and the location function in the phone is turned on;

In the "Location Services", there will be an app on the phone that will use location, find the "Camera" item;

Select "Never", so that if you take a photo with an Apple phone**, there will be no location information displayed.