Which is better, Providence U disk maintenance system or Morrowind U disk maintenance system?

I've used what you said.,I think Morrowind is not as good as providence.,Providence is the win xp win 7 of the three systems is very easy to use.。

Toshiba notebook,Bought in one or three years,Some time ago, I reinstalled a system,It will take dozens of minutes to boot up.,Keep showing writing files.,Shut down for a few hours,Keep showing to update data.,Don't force shutdown.,One day the power goes out.,The notebook is shut down when it's out of power.,You can't enter the system when you turn it on later.,The newly bought U disk installation system.,It takes two hours to enter PE.,I'm in a hurry.,Seek a solution.。

Is it into the desktop of the PE system, if that's the case, it means that there is a problem with the U disk boot disk you made, which needs to be redone, and there is a very slow search boot of your computer hardware, it is recommended that you enter the BIOS settings and start the U disk as the first boot! And I think it's your USB flash drive problem! The reading and writing of the USB flash drive is a very important reason!

The above three reasons are based on my guesses from what you provide! You need to find out for yourself!

The simplest version of the system to reinstall the system with a USB flash drive PE is:

First use U Daxia to install PE on the U disk

Copy the system to the GHO folder of the USB flash drive.

Set BIOS boot boot program to U disk boot.

Enter PE, click U Daxia PE one-click installation, and complete the following prompts.

You find a CD-ROM drive and try again.

No more, I had to test the hard drive.

Generally, if the hard disk has bad sectors, it will be very slow to install the system.

Whether it is a motherboard computer for a relatively long time, this may also have something to do with the aging of the hardware. But it's also possible that you're making PE tools. You can change the one-click reinstallation tool to make a U disk boot disk into the PE reinstallation and take a look. The operation of the Xiaobai tool is relatively simple.

Generally, if the hardware is bad, it will not pass during the self-test. There is detection software in PE, but it is not good or bad, but generally PE has an HDTune, this software can detect the use time of the hard disk, whether there are bad sectors, etc.

It must be started with a USB flash drive first.,Installing the system and hard disk partition is basically an operation.。

Of course, the new host is set up first and the USB drive is launched.

In fact, a newly installed computer must be a new hard drive. On a brand new hard drive, there is no data, let alone an operating system. The operating system is the foundation for the computer to start and use, and without the operating system, the computer cannot be started at all.

Therefore, if you want to use a computer, you must first set up a USB drive to boot. When the USB drive boot is completed, use the partition tool to partition the hard disk, and then install the system before the computer can be used.

Looking at this description, it should be that the system installation failed, or the driver was not installed well, and the operating system must be reinstalled.

It is recommended not to install the ghost version of the system, or to install the original operating system.

Solution: Press shift+f10 when prompted, and enter the following **::

CD OOBEs are determined by pressing enter.

msoobe press enter to confirm.

The installation cadence then continues to execute normally.

Restart the computer manually and start normally.

1. The most likely cause is a system-driven conflict, which is the cause of most of these errors.

2. The second is the problem caused by disk partitioning, which is generally caused by the Windows installation package not being placed on the correct disk.

Solution: 1. For driver conflicts, after the error dialog box of [Windows installer cannot configure Windows to run on the hardware of this computer] appears, press shift+F10 (the notebook needs to press FN at the same time), the command window will open, enter cd oobe and press Enter, enter MSOOBE and press Enter, and wait for the installation to be completed smoothly.

2. In view of the problems caused by disk partitioning, use automatic partitioning software to re-partition and format the hard disk, select the right disk type, and complete the fast partitioning. If there is no need to split the disk, there is no need to split the disk, if necessary, of course, you can choose to divide the disk into several disks, and install the system again after completion.