If the gas stove at home is broken, can it be replaced with another brand?

I think if the gas stove at home is broken, it is better not to replace it with another brand, you should choose the original one, if you choose other brands, there may be other problems.

Of course, it can be replaced by other brands, and no one stipulates that the gas stove must use the same brand, as long as we do the relevant research, we have the products we want to buy, we can buy it back and use it.

If the stove at home is broken, it is better to change to the same brand and model, so that it is more complete and there will be no problems. It is said that the original is good, so be sure to change to the same brand and style.

The gas company has the right to forcibly replace the stove when it expires, and according to national regulations, the service life of the gas stove is 8 years, and it must be replaced when it expires. Overdue use of gas stoves will be prone to problems such as flameout and safety device failure due to the aging of internal components, resulting in gas leakage. The three compulsory measures refer to the installation of gas self-closing valves in front of the stove, stainless steel corrugated hoses for stove connections, and gas cookers with automatic flame-out protection devices.

Gas operators shall, in accordance with the relevant national engineering construction standards and safety production management regulations, set up anti-corrosion, insulation, lightning protection, pressure reduction, isolation and other protective devices and safety warning signs for gas facilities, and conduct regular inspections, inspections, repairs and maintenance to ensure the safe operation of gas facilities.

Legal basis: Regulations on the Administration of Urban Gas

Article 40 Any unit or individual shall immediately inform the gas operator of a gas safety accident or a hidden danger of a gas safety accident, or report it to the gas management department, public security organs, fire departments and other relevant departments and units.

Article 41 Gas operators shall establish and improve the gas safety assessment and risk management system, and shall take measures to eliminate potential gas safety accidents in a timely manner if they are discovered。

The gas management department and other relevant departments and units shall, in accordance with their respective duties, supervise and inspect the safety status of gas operation and gas use, and if they find hidden dangers of gas safety accidents, they shall notify gas operators and gas users to take timely measures to eliminate hidden dangers; If the hidden danger is not eliminated in a timely manner and may seriously threaten public safety, the gas management department and other relevant departments and units shall take measures in accordance with the law to organize the elimination of the hidden danger in a timely manner, and the relevant units and individuals shall cooperate.

Liquefied gas stove to natural gas stove, as long as the two flamethrowers are replaced with the flamethrower of the natural gas stove, but it is not recommended to change the liquefied gas stove to natural gas stove by yourself, if you must change, it is best to ask the manufacturer of the stove to see if it can be transformed, and ask professionals to modify it.

There are differences in the two types of gas pressure, delivery methods, etc., and according to the regulations, the type of gas used in the stove cannot be changed. If it changes, there will be a serious security risk. The pressure rating of the liquefied gas tank is greater than that of natural gas.

If the hose is used for a long time, there is a possibility that the hose may rupture due to high pressure. Due to the increase in pressure, the modified liquefied gas stove causes insufficient gas combustion and produces a large amount of carbon monoxide, resulting in poisoning.

To change a gas stove to a natural gas stove, you only need to change the nozzle of the burner pilot pipe nozzle from a liquefied gas nozzle to a natural gas nozzle.

Built-in cooker structure: Built-in cooker is mainly composed of embedded burner (stove head, internal and external fire cover, etc.), valve body (including nozzle, damper plate, conical spring, solenoid valve), panel (tempered glass panel, stainless steel panel and non-stick oil panel, etc.), stove frame, knob, liquid tray, furnace foot, bottom shell, air intake pipe, connecting pipe, pulse igniter (built-in cooker is generally pulse ignition.

Air intake mode:

There are four main air intake modes of gas stoves on the market: upper air intake, lower air intake, side air intake and full air intake.

Lower air type: this kind of stove is copied from the imported stove, in order to meet the cooking habits of the Chinese people to increase the heat load and burner, this kind of foreign products are required to open the cabinet, or rely on a larger cabinet gap to supplement the secondary air required for combustion, and at the same time used for the inevitable discharge of leakage gas during ignition, and small heat load design.

However, few domestic users know that the cabinet is opened, which causes insufficient combustion, high concentration of yellow flame and carbon monoxide, and once the gas leakage is large, it may cause ignition and ignition, resulting in the bursting of the glass panel.

When replacing the gas source, the stake is a desktop electronic lighter, and the stove nozzle and piezoelectric igniter nozzle need to be replaced.

In the case of a built-in pulse-ignition gas hob, only the burntop nozzle needs to be replaced.

The technical specifications of the brand after-sales are that the removed accessories must be recovered by the manufacturer, I don't know if you are looking for the after-sales of the gas stove or? In addition, if it is said that these four nozzles have been left by maintenance, but your stove has been modified, then it can be sure that these four nozzles are not suitable for air source nozzles removed from your home stove, and the stove can be used directly, and these nozzles are not used.

In Shanghai, the gas company arranges for the cooker manufacturer to replace parts free of charge. In fact, you can replace 2 of them, the nozzle of the original small hole is still easy to use after reaming, and the new smaller nozzle is installed at the position of the original small hole. Now maintenance traps abound, more for more and more for money.

The damper blades do not need to be replaced.

Only a nozzle was changed. I don't have time to get it for you.

How to change the gas stove to an inflammatory gas stove.

Do the math how much it will cost you to renovate your home

There are many kitchen appliances on the market today, and gas stoves are one of them. So the question is, does the gas company need to change the gas stove? What should I pay attention to when installing a gas stove? Let me give you a brief introduction to the relevant knowledge of gas stoves.

Do you need a gas company to change the gas stove?

There is no need for the gas company to replace, you just need to do it yourself or ask the after-sales personnel of the product to replace it. However, before replacing the gas stove, the size of the opening should be measured to prevent the purchased gas stove from being inappropriate and affecting the installation effect. In addition, you need to check that the gas stove has all the parts.

What matters need to be paid attention to in the installation of gas stoves.

1. The importance of size.

Before replacing and installing a new gas stove, you should carefully measure the size of the building, and bring the detailed opening size to the gas stove store to buy. If the gas stove exceeds the opening, then it will not be installed. Of course, if the gas stove is lower than the opening size, then the two will not fit tightly, resulting in panel cracking.

2. Integrity of accessories.

After the gas stove is delivered to your door, the first thing you need to do is to carefully check whether the parts in the package are complete, and if you find that there is a leak or a missing situation, you should communicate with the seller in time. If you don't find out until you install it, it will be very troublesome to deal with. In addition, you need to further check whether the gas stove is the same as the outer packaging to avoid the merchant to adjust the package.

3. Pay attention to details in installation.

Before installation, it is important to remember to turn off the gas to prevent potential safety hazards. Also, during the installation process, remember not to seal the vent to prevent a series of accidents during use.

Summary: After reading the above introduction, I believe you have a further understanding of whether the gas company needs to change the gas stove. If you need to know more about it, please continue to ******, and we will present more exciting content for you in the future.

Enter the area and get the decoration for free**].

Enter the area and get the decoration for free**].

You can replace it yourself, but the place where the gas stove and the gas pipe are connected must be connected with special accessories, and then use laundry detergent to test whether the air leaks or not.

The gas pipe has the characteristics of easy installation, reliable connection, corrosion resistance, no gas blockage, good flexibility, long service life, and can be bent arbitrarily without deformation and gas blockage. The surface soft protective layer material has the characteristics of safer, easier to clean and more beautiful, and the service life of stainless steel threaded metal hose is 8 years.

PE gas pipes in China's municipal pipe market, plastic pipes are developing steadily, PE gas pipes, PP-R gas pipes, UPVC gas pipes all occupy a place, among which the strong development momentum of PE pipes is the most eye-catching, and its use is also very extensive.

No way. If the gas appliances are modified and installed without permission, it will not only cause instability to the reasonable flow of gas, but also have a great impact on the safe use of users. Because the gas source pressure of natural gas, liquefied gas and artificial gas is different, the composition and combustion characteristics are different, and the caliber of the nozzle is also different.

The service life of natural gas cooktops is 8 years, and the life of natural gas water heaters is also 8 years. ”

More and more users are now using natural gas, and new gas cooktops are being replaced for this purpose. "In the past, it was allowed to change the stove nozzle, but after the new specification was introduced, it will not work. Yu Hui, director of Dalian China Resources Gas, said that the new regulations make it clear that the gas appliances that are modified in the future will not be able to pass the safety review, and can not be replaced and ventilated in accordance with the law.

Fuel appliances must not be mixed with nameplates.

Inconsistent gas categories, including gas stoves and water heaters, cannot be used as natural gas appliances simply by changing the stove nozzle. Because the gas source pressure of natural gas, liquefied gas and artificial gas is different, the composition and combustion characteristics are different, and the diameter of the nozzle is also different, unauthorized modification will not only interfere with the normal gas output order of gas appliances, but also pose a threat to the safety of gas use.

However, if you bought a natural gas stove at that time, and changed it to a gas or liquefied gas nozzle before using natural gas, you can change it back to a natural gas nozzle if it is still within the safe period. The person in charge explained.

Natural gas replacement and gas pipeline network renovation is one of the city's key livelihood projects in 2022, and the replacement target for this year is 270,000 households. On the morning of the 9th, the relevant persons in charge of the Municipal Bureau of Housing and Urban-Rural Development and Dalian China Resources Gas **** were guests of the Dalian News Media Group Broadcasting Center's comprehensive broadcast "12345 Government Service Convenience for the People**.

Constantly, non-stop consultation.

When the gas stove reaches the age of the stove, as long as the stove head is changed, you can pay attention

There are mainly the following reasons: 1. It may be caused by the damage of the ignition needle of the gas stove. 2. It may be that the gas stove has been used for a long time and has rusted.

3. It is also possible that the battery of the gas stove is out of power. Suggested treatment: 1. Caused by damage to the ignition needle of the gas stove.

If the ignition needle of the gas stove is faulty, the maintenance personnel can replace it with a new ignition needle. Pick up the pot holder and see if there is a fire at the ignition nozzle, if it is not on fire, then see if the discharge needle is discharged. If the discharge needle does not discharge, it means that the discharge needle is faulty and the discharge needle should be replaced.

If the discharge needle is discharged, it means that the valve body is faulty and the valve body should be replaced. 2. The gas stove is rusty for a long time. It is difficult to disassemble the gas stove directly if it is rusty, so you need to use a tool to unscrew it, you can find a wrench, it should be easy to wipe the screws on it, so that you can remove the stove.

However, if the rust problem of the gas stove is more serious, you can use gas welding oxidation, and then drop an appropriate amount of cooking oil, so that it can play a loose role, and then you can use a tool to disassemble it. In addition, it should be noted that when dismantling the gas stove, the valve must be closed first, otherwise it is easy to leak and is also very dangerous, and it is best not to use the gas stove before dismantling. 3. The battery has no power, and when it is found that it is not on fire, it is necessary to check whether the battery has electricity, if not, you only need to replace the ordinary No. 1 battery.

When you want to replace the old gas stove at home, you need to measure the size of the opening hole first, and then bring the size chart to purchase the gas stove to avoid the size of the inconsistent and affect the installation effect. During the installation process, pay attention to clean the installation environment first, and remember to turn off the main switch of the natural gas valve or gas main valve.

Precautions for gas stove installation Min answer:

1. The importance of size.

Replacing or newly installing a gas stove must hold the size of the bending problem, and then purchase the gas stove with a detailed opening size. If the gas stove is larger than the opening, it will cause the installation to be inaccessible, and if the gas stove is smaller than the opening size, it will make the two fit tightly and not secure, resulting in unexpected situations such as panel cracking.

2. Integrity of accessories.

After receiving the gas stove, the first thing is to check whether the accessories in the package are complete, if there is a leak or missing, communicate with the seller in time, if you wait until the installation to find that it will be a lot troublesome. In addition, it is also necessary to check whether the gas stove Qiaoqiao Hui is the same as the outer packaging, so as to avoid the merchant "changing the tanuki for the prince". <