Can the exposed 5 pin socket be mounted directly on the metal body?

The surface-mounted five-prong socket keeps the internal circuit insulated from the outside, so it can be mounted directly on a metal surface.

A five-pin socket is a power socket consisting of a two-plug and a three-plug power outlet.

It consists of insulating materials.

Made. The five-pin socket can make reasonable use of space resources, which is more economical and convenient.

Wire sockets are installed at will.

The power leads must use a copper wire cross-section. If you are living in an old house, be sure to replace the original aluminum wire with copper wire. Because the aluminum wire is very easy to oxidize, the joint is easy to ignite.

Surveys have shown that the incidence of electrical fires in residential buildings using aluminum wires is dozens of times that of copper wires. In addition, many families use slotted threads for aesthetic reasons.

In the way of laying dark pipes, Xia Dong reminded that the principle of "live wire into the switch, zero wire into the lamp head" must be followed when wiring, and a leakage protection device should be set up on the socket.

Yes (e.g. container dormitories).

However, it is necessary to do a good job of insulation of sockets and lines, and the metal body should also be grounded, so as to ensure the safety of use.

Of course, the surface-mounted five-pin socket can be installed on the metal surface, glass glue can be used, or it can be directly riveted on the metal surface and insulated.

Surface-mounted with bottom shell, pay attention to the distance between the wiring and the fixed riddle.

Of course, you can, but you must connect it properly and the wires don't leak out.

Absolutely, no problem.

Yes, but it is recommended to ground the metal body.

The power live wire is connected to the L end of the socket, the power neutral wire is connected to the N end of the socket, and the power protection ground wire is connected to the ground symbol of the socket.

If the switch controls the socket, the live wire is connected to the switch L1, the wiring from the switch L2 to the socket L, the neutral wire is connected to the socket N, and the ground wire is connected to E. If the switch control lamp, the live wire is connected to socket L, the neutral wire is connected to N, and the ground wire is connected to E, from the lead wire of socket L to switch L1, switch L2 is connected to the lamp control wire.

Socket (also known as power socket, switch socket, pinyin: chāzuò, English: powersocket) refers to a socket with one or more circuits that can be plugged in, through which various wires can be inserted to facilitate connection with other circuits.

The power socket is an electrical device that provides a power interface for household appliances, and it is also an electrical accessory used more in residential electrical design, which has a close relationship with people's lives.

After residents move into new homes, it is generally reported that the number of power sockets is too small and extremely inconvenient to use, causing residents to privately connect power cords and install socket wiring boards, which often cause personal electric shock and electrical fire accidents, and bring major hidden dangers to personal and property safety.

Therefore, the design of power sockets is also an important basis for evaluating residential electrical design. Sockets can be divided into industrial sockets, power sockets and mobile sockets according to their uses.

Most of the high-quality switches are made of bulletproof glue and other advanced materials, with high fire performance, moisture-proof performance, anti-impact performance, etc., and a smooth surface.

Generally speaking, products with a surface that is not too smooth and have a thin and brittle feel to the touch cannot be trusted.

The panel of a good switch socket requires no bubbles, no scratches, and no smudges. The switch toggle feels light and not tight, the jack of the socket needs to be equipped with a protective door, and the plug should require a certain amount of force and cannot be inserted with one foot.

l connect to the live wire, n to the zero wire, the grounding wire of the grounding mark, there is no ground wire can not be connected, but it is recommended to connect the ground wire.

If the switch controls the socket, the live wire is connected to the switch L1, the wiring from the switch L2 to the socket L, the neutral wire is connected to the socket N, and the ground wire is connected to E. If the switch control lamp, the live wire is connected to socket L, the neutral wire is connected to N, and the ground wire is connected to E, from the lead wire of socket L to switch L1, switch L2 is connected to the lamp control wire.

How to arrange the socket at noon tomorrow, there are three connectors after opening.