Can the dragon s beard tree be saved if the pole is soft and shriveled?

Yes. When replacing the potting soil with a new one, carry out a disinfection sterilization to avoid reinfection and rot of the freshly pruned roots. The new potting soil must have good drainage and air permeability, and a layer of crushed rubble can be spread at the bottom of the pot as a drainage layer.

If the trunk of the dragonbeard tree is not only weak, but the core has become hollow, then there is no need to remedy it, because once the core is empty, the plant is already dead, and no amount of remedy can save it. Therefore, no matter how to save the soft stem of the dragon beard tree, it must be remedied between the hollow core of the tree.

Yes, here's how.

1. Drain and dry.

Dragon's Whisker Tree. It is a drought-tolerant and waterlogg-tolerant plant, and the phenomenon of soft trunk is generally caused by water accumulation in potting soil. After the potting soil accumulates water, it is impossible to breathe, and after a period of time, it will rot and the branches will become soft.

The excess water in the potting soil is first drained before the plants can be removed from the pot and allowed to dry in a cool, ventilated place.

2. Trim the root system.

If the root system of the dragon beard tree is seriously damaged, it is necessary to break up the soil, expose the root system to dry, and then prune off the damaged and rotten root system, and apply carbendazim to the root system after pruning.

Wait for the solution to be sterilized, and then reformulate a new potting soil for planting.

The leaves of the dragon's beard orchid are soft and drooping, and they can be easily solved from two aspects.

First of all, you need to determine whether it is caused by improper maintenance: such as overwatering, lack of water, insufficient light and ventilation, etc.; And make corresponding improvements, there is generally no problem. If it is not, then it is the normal metabolism of the plant, and the dry and drooping leaves can be pruned off.

Here's why this happens. <>

Enumerate: 1: Watering Reason:

If you put too much water on the dragonbeard tree, the roots will not be able to absorb it, so that the water in the soil will accumulate together, which will cause great damage to its roots, and then the leaves will grow downward. If the water in the soil is lost quickly, the soil becomes very dry, the roots are damaged, and the leaves will naturally wilt and droop. Is the dragon beard tree because of too much or too little water caused by the leaf drooping, or there is room for saving, it can be rehydrated or controlled water can be better improved, in the future according to the correct watering method of care, the soil is dry and then to replenish the water can avoid leaf drooping.

2: Environmental reasons: If you find that the leaves of the dragon beard tree grow downward, you must first find the main reason and then solve it, because this situation is not single, there are many factors that can lead to it, sometimes the sun is not good, it will also make the leaves droop, and sometimes the air is not enough to circulate, the leaves will naturally droop, if you want to maintain the dragon beard tree, you must put it in a place where there is sunlight, the air is smooth enough, and it can bring it a better breathing environment. That's when the dragon's beard tree grows luxuriantly.

3: temperature reasons: the dragon beard tree is not afraid of the heat, but very afraid of the cold, especially in winter, the northern growers, must put the dragon beard tree indoors in advance for maintenance, if affected by the cold air, it will hinder its growth, the leaves will naturally be damaged, if you want to raise a good dragon beard tree must be kept at room temperature 15-25 degrees.

In this way, it can survive the winter smoothly.

The dragon's beard tree has rotten roots, and the rescue content is as follows:

1. Prune.

When the root system of the dragon's beard tree has rotted, it needs to be taken out of the pot and placed in clean water to wash the soil on it. Then prepare a small pair of sterilized scissors and cut off all the roots that have rotted and blackened. After that, most of the leaves above the plant are cut off, which reduces the consumption of nutrients and allows it to take new roots.

2. Pharmaceutical treatment.

Prepare some disinfectant and dilute it with water. Then put the roots of the plant in it and soak it for about 20-30 minutes. After that, take it out, dry it, and then put it in 1,000-fold diluted rooting water, soak it for about 5 hours, take it out, and let it dry.

3. Prepare new soil.

Because the root rot may be caused by a lot of germs or stagnant water in the old soil, it is best to replant it with new soil so that its roots do not rot again due to these reasons. It is recommended to choose new soil with good air permeability and high drainage capacity, which can be made by mixing five parts of garden soil, three parts of humus soil and one part of river sand.

Fourth, replant.

Sterilize the new soil and put it in a pot. Then dig a small pit on it, plant the plants in it, and fill the pit with the surrounding soil. Then place it in a softly lit place, water it inhibited, and wait for it to recover slowly.

The dry and shriveled branches of the dragon's beard tree may be caused by improper maintenance, and only timely remediation is needed to restore the growth of the dragon's beard tree. The shriveled branches of the dragon's beard tree may be caused by overwatering, so it is necessary to drain the water from the soil and prune off the rotten root system before replanting it in new soil. If it is not remedied, the root rot of the dragon beard tree will occur over time, and in severe cases, it may lead to the death of the dragon beard tree.

Shriveled branches of the dragon's beard tree can be caused by over-watering, which can lead to water accumulation at the roots of the dragon's beard tree, and excessive water accumulation in the potting soil will cause the roots of the dragon's beard tree to be unable to breathe properly, and the branches will dry up after a period of time. At this time, it is necessary to take the dragon beard tree out of the pot, place it in a ventilated and cool place to dry, and drain the water in the potting soil, and change the soil again and replant.

If the root damage of the dragon's beard tree is more serious, you need to break up the soil in the pot, then prune off the rotten root system, and spray carbendazim solution to the wound for sterilization and disinfection.

Note that when changing the soil of the dragon's beard tree, the soil needs to be sterilized and disinfected to avoid re-infection of the root system after pruning. In addition, a layer of rubble at the bottom of the pot is needed to drain the water from the soil and prevent the dragonbeard tree from becoming waterlogged and rotten.

Extended Information: Key Points of Conservation of Dragon's Whisker Tree:

1. To breed the dragon beard tree, it is necessary to provide it with soil with good air permeability and drainage, which can be prepared at home.

2. Keep the potting soil slightly moist every day, and water it every 3 to 5 days.

3. In addition, it needs to be provided with suitable light and temperature.

4. Most of them will take strips and cuttings to reproduce.

5. The dragon beard tree grows very quickly, and because of its photosynthesis, the water evaporates faster, and the nutrients in the soil are lost quickly, so the growth process must be top dressed, you can insert a few small holes in the soil, put the organic fertilizer, phosphorus, potassium into the watering, the soil will absorb quickly, which is conducive to the absorption of fertilizer by the roots of the dragon beard tree.

It is necessary to depot and prune the rotten root system of the plant in a timely manner.

Dragon's whisker is a drought-tolerant and waterlogg-tolerant plant. The soft trunk appears to be caused by water accumulation in the soil of the basin. When the potting soil is waterlogged, there is no way to breathe.

After a while, it will rot and the branches will soften. First, drain the excess water from the potting soil, then remove the plants from the pot and place them in a cool, well-ventilated place to dry.

If the root system of the dragonbeard tree is severely damaged, the soil needs to be broken up, the root system is exposed and dried, and then the damaged and rotten root system is pruned off. After pruning, the roots are disinfected by applying a solution such as carbendazim. , and then the Chongdou tribe newly prepared a new potted slow planting soil for planting.

When replacing the new potting soil, it is necessary to disinfect and sterilize the newly pruned root system to avoid reinfection and rot. The new potting soil must have good drainage and air permeability, and a layer of gravel can be laid at the bottom of the pot as a drainage layer. If the trunk of the dragon's beard tree is not only soft, but also the nucleus is empty, then there is no need to remedy it, because once the nucleus is empty, the plant is dead, and no amount of remedial treatment will help.

Need. The road was saved. Therefore, no matter how soft the dragon's whiskers are, no matter how softly preserved, they must be remedied in the hollow of the tree core.