Will tatami mats be fashionable in low rise residences?

Install tatami mats at home.

It's good, but there are a lot of problems with the tatami itself - that's the main reason why it can never change the bed. Perhaps the most troublesome of these problems is the "resurgence". People who have actually used tatami mats will find that what is placed in tatami mats is always damp, which is not comparable to the storage capacity of wardrobes and box beds.

No matter what the tatami mat is, it cannot be smashed directly on the cement floor, because the humidity of the cement floor is very high, especially for the owners with relatively low floors, in humid weather, the ground will have moisture backflow, which will directly affect the wet deformation and cracking of the tatami platform plate, therefore, it is best to have floor tiles.

and flooring and other mediums are used in places.

Before arriving at the tatami platform, be sure to tell the host to reserve an exhaust hole. The advantage of the vent is that it allows the harmful substances in the furniture to volatilize quickly, and at the same time helps the moisture inside the tatami mat to be quickly discharged, keeping it dry and avoiding insects and ants. It is important to check the waterproofing layer.

If the ground is too wet, it can easily affect the service life of tatami mats. It is recommended to perform a waterproof test before decorating the tatami mats to see if there is any leakage. If so, the waterproofing of the room needs to be re-laid.

The choice of plates is also important. When designing tatami mats, it is advisable to choose high-quality sheets.

Such as solid wood or high-quality solid wood particleboard.

Because if the tatami material is not good enough, it is easy to have safety problems in the first place, and then the wood is easy to be eaten for a long time and mold.

Tatami designs are usually surrounded by three walls or windows, and some even rely on exterior walls. If you experience cold or damp while sleeping, you need to apply a thick-walled cloth.

If the wall covering. It is not elastic and can be very uncomfortable to lean against a hard wall; In areas close to windows, it is easy for cold air to blow in through window cracks, especially north-facing windows, which need to be accompanied by thick curtains.

Tatami mats are usually made of bamboo.

or made of grass. They are prone to producing insects for a long time. In addition, if drinking and drinking tea on tatami mats, water stains can easily penetrate the inside of the mat.

It is recommended to dry it every few months. The lower the floor, the less advice the owner has for installing tatami mats. The lower the floor, the more damp it is, and the room where the tatami mats are located must be dry and ventilated, so friends with higher floors are more suitable for installing tatami mats.

Of course not, many people will choose this decoration method in their lives, the home looks particularly atmospheric, and it will also make the home have a good storage space.

It can be very humid because the low-rise houses are close to the ground, so there is a possibility that it will get wet, and if you go to install tatami mats, it is especially easy to get insects.

No, the tatami mat material is very dry and does not have some water absorption, so it is very good to use this thing in low-rise houses.

When installing tatami beds on lower floors, the first thing to consider is the overall environment of the room. If the indoor environment is relatively humid, it is not suitable to install tatami beds, because the tatami mats are relatively low, and too humid environment is not conducive to everyone's rest, and too humid is not conducive to everyone's health. Environments with a lot of insects are not suitable for tatami beds.

The tatami bed itself can be easily damaged. Since tatami beds are relatively short, people are prone to insect bites while sleeping. If the tatami bed is made for children, because children are much less resistant to mosquito bites, insect bites can lead to other diseases.

When choosing tatami mat boards, it should also be noted that different boards have different moisture-proof features. It is better to choose a material with better moisture resistance. Attention is also needed to the material of the floor.

If it is a solid wood floor, its moisture-proof effect is not as good as that of laminate flooring. You can also paint the floor with moisture-proof paint and make an air-separating moisture-proof layer under the tatami platform. When installing a tatami mat, its angle should also be taken into account.

It is best to place it in a sunny location and it needs to be ventilated before and after installation. It is also possible to turn on the dehumidification function of the air conditioner, or turn on the dehumidifier and clothes dryer to remove excess water vapor from the room and keep it dry. To avoid direct contact between the tatami mat and the ground, you can make a platform first, or leave a few air holes when decorating the base frame.

Waterproofing measures must be taken before installing tatami mats. Since tatami mats are generally made of rush grass and are very absorbent, it is best to add a layer of moisture-proof mat underneath. If it's during the rainy season, quicklime, desiccant, and other absorbent things can be placed in the tatami mat to absorb the water.

Before the production of tatami cabinets, it was basically made of solid wood frame plus solid wood planks or solid wood frame plus composite board. This combination is now not suitable for the production of tatami mats. It is recommended to use unpainted eco-panels or unpainted multi-layer panels as cabinet components.

Pine, fir and particleboard are not recommended because they are prone to deformation, and unpainted eco-boards and unpainted multi-layer boards have greater moisture resistance and stability.

Yes, if you live in a low-rise building, it will be especially trendy to install tatami mats; Be sure to do a good job of waterproofing, you can pave a moisture-proof mat, the details must be done, the selected plate must be a little better, and you can make a few more breathable holes.

I think it's possible, because the low-rise houses don't have good lighting and are relatively humid, and if the tatami mats are not cleaned well, there is a high probability that they will become damp; It should be cleaned regularly, pay attention to leaving ventilation holes, do not do fully enclosed treatment, keep the room dry, and try to open windows for ventilation.

Residents on lower floors are ideal for installing tatami mats, as they add a sense of design to the space, and a low cabinet under the tatami mats can also increase the storage space in the house. First of all, the height of the floor and wall should be about 15 cm above the height of the floor to do a good job of moisture-proof treatment, to brush moisture-proof paint, when using tatami mats, should take off the plastic packaging film.

Tatami mats in low-rise residences are particularly trendy, and you can install a waterproof layer to prevent moisture when installing tatami mats.

Tatami mats are not very susceptible to moisture.

Because the tatami mat tide is not damp to a large extent is affected by the waterproof effect of the wall, basically as long as the waterproof effect of the wall is passed, it is a rainy day.

If you don't open the window, you don't have to worry about the tatami mats getting wet. However, it is worth noting that if the weather is clear, be sure to open the tatami mat to allow it to ventilate, which is beneficial.

If you encounter a humid situation, don't worry, turn on the dehumidification effect of the air conditioner, and then use the upper blowing plane to blow dry, as long as it is timely, it will not leave a problem.

Because the tatami mat is sealed underneath.

If you use tatami mats a lot, or use them directly as a bed.

Tatami mats are sure to get wet.

Absolutely!

It is best to protect the floor from moisture.

Under the tatami floor, an air vapor barrier is made.

And the tatami mats should also be treated with moisture-proofing.

And the bottom layer of the tatami mat should also be made a moisture-proof layer.

Physical dehumidification, if there is a lot of water vapor at home, water seepage on the walls and floors, you can use a dry mop or dry rag to remove the visible water stains, and then turn on the fan, blow and dry the home in time and put desiccant, if the home is really wet, you can place quicklime, desiccant and other absorbent things, but friends with children or pets at home should pay attention to the position to prevent pragmatic dehumidification appliances, in addition, we can also remove excess water vapor indoors by turning on the dehumidification function of the air conditioner or turning on the dehumidifier and dryer, Keep dry.

I think that when placing tatami mats, you must not make the tatami mats directly touch the ground, so that it is easy to get wet when the tide returns, and you must put bricks or other wood at the bottom to make it higher, so that it can effectively prevent the resurgence of moisture.

If the tatami mat is damp, you can open the window and leave it in a ventilated place to dry. You can also turn on the air conditioner at home and close the windows, so that you can step on the rice quickly. Dry.

Because it is a wooden structure as a whole, the tatami mat decoration base frame needs to be treated with insect and moisture protection in advance, and it is best to reserve a ventilation hole. The surface plate of the tatami floor can be made of solid wood or laminate flooring, and the floor should also be treated with moisture-proof and insect-proof.

In addition to insect protection, in general, the area where tatami mats are laid should be protected from moisture. Do not damage the original waterproof layer of the house, and even do a waterproof test on the relevant area before decorating the tatami mat, if there is a leak, the waterproof layer needs to be redone. In addition, make sure that the drainage system on the balcony floor is clear so that water does not seep into the room.

Tatami moisture-proof has little to do with the floor. It has a lot to do with the region, for example, in the north (north of the Yellow River), there is less moisture prevention.

problems. In the south of the spring and summer humidity festivals are relatively high. Tatami mats should be dried often!

In addition, tatami mats are insected, mainly on straw mats. Therefore, here, I recommend that friends in the south buy tatami mats.

When trying not to choose the straw inside, choose the palm one.

Shenzhen tatami custom Shenzhen tatami custom manufacturers Yi Pusen Furniture Factory If it is helpful to you, remember to adopt it

Hello, my home is the method of using bamboo mat isolation and bed board punching, and the tatami mat is not wet all year round. Punching holes in the bed board: When installing tatami mats, you can make a few holes in the bed board, which should not be completely closed, leaving some gaps for air circulation, and the upper and lower can be breathable.

Bamboo mat isolation: The hardness of the bamboo mat is high and there are many gaps, so placing the bamboo mat in the middle of the bed board and tatami mat can play a role in isolating moisture and increasing air permeability.