Does the tempered film on the back screen of the iPhone have a white edge?

iPhone rear pressure screen tempered film it has white edges, generally speaking, it is normal to have white edges, this phenomenon does not mean that the mobile phone film or what is the problem is not suitable.

Then the screen pressing and sticking the tempered film has a white edge, but take a look at the worker who pasted the mobile phone film for you, and his technical level has no white edge.

Flattening the tempered film usually has white edges, but if you can't stick it well, you can use the liquid film method, that is, take the albino liquid of the film and drip it into your screen. Then paste it with tempered film.

The tempered film on the back screen of the Apple mobile phone should have no white edges, unless you need this yourself.

The tempered film on the rear pressure screen has a white edge, and the tempered film on the back screen of the iphone has a white edge. That illustrates this tempered film. It's not well pasted, so be sure to fill it up with filler.

Due to the design of curved glass, there will be white edges in the process of pasting the tempered film.

Hello, there will be white edges. You can choose the original. Buy as you like.

It mainly depends on which model your iPhone is, the tempered film of each model is different, you can take it to a professional film shop to consult the staff.

If you say that the tempered film of the iPhone with the screen film has a white edge, I think this can be restored by applying some liquid or something.

There is a white edge on the tempered film on the rear pressure screen, and the tempered film should be pasted in this case, but there should be no in the future.

Does the tempered film on the back screen of the iPhone have a white edge?How much oil does this seem to be in general? But the impact is not big, it does not affect the appearance, no problem.

If he dances well, he won't do it in vain.

If the electronic product has white edges when laminating, it should not be a regular product.

Me,We still have our own screen model.,And if it's self-reversed,It's more convenient to use with white edges.。

This problem has not been encountered, and if you have encountered it, it is recommended to re-apply a film.

After pressing the film, it is better to stick, because she and his arc are not so well controlled.

If the tempered film is pressed on the back of the iPhone, there is a little bit of white edge.

I think some apples have some apples and some apples don't, and the one you said should not exist.

I don't know if there is a white edge in the tempered film after pressing, you can check it on the Internet.

This kind of Yaping tempered film has a white edge, and you can ask him to smoke and paste it. The north side is still not particularly good?

Does the tempered film of the compression screen after one have white edges? There should be.

This depends on whether the optical tempered film you choose is full-screen or half-screen?

Probably because: iphone6The screen is curved, which causes the ordinary tempered film to only stick to the flat part in the middle of the screen, and the part with the arc edge is powerless, so there is a white edge. It is recommended to use a fully bonded film, so there will be no white edges.

With a smaller tempered film, there will be no white edge if you don't stick to the curved edge.

White edge repair solution can be used.

The white edge is mainly because the current mobile phone is made of curved glass in order to have a better grip, and the ordinary tempered film is still a flat one, which can only stick to the flat part in the middle of the screen, and there is nothing that can be done about the curved part, so there will be a white edge.

Be careful not to allow the white edge repair solution to seep through the gap next to it, as it will cause problems such as blurred screens.

Now there is no way to achieve the arc of the fitting surface, and now the new mobile phone is a little arc on both sides and up and down, the flat tempered film can not be completely attached to the mobile phone screen, and can only stick to the plane part in the middle of the screen, which will produce white edges.

Here's how to use white edge fillers:

1. Open the lid of the filler on the white key beam, and then gently squeeze the bottle.

2. Apply the white edge filler to the white edge on the phone.

3. After applying, gently press out from the middle and the outside to spread the white edge filler all over the white edge.

Fourth, after pressing, it can be clearly found that the white edge is gone.

PrecautionsBe careful not to use too much force when pressing, to avoid the white edge leaking out from the side, the filler is non-corrosive, harmless to the mobile phone and the human body, do not worry about safety issues.

Not yet.

The feeling of the full fit sold online now is still immature and fragile.

But if you want to do it yourself, you can use a tool to reduce this situation a little.

The method of solving the "tempered film white edge".1. Tools:

Full transparent non-full-screen tempered film, edible oil, toothpicks, alcohol.

2. Method: Paste the film on the screen as perfectly as possible, no matter how good the non-full-screen film in the world is, there will be white edges 1, dip a toothpick in a small amount of cooking oil, and scratch it along the edge of the tempered film, and the oil will suck it in by itself. Slowly, you'll notice that the white edges are gone, and there's no magic haha....

Probably not yet. The feeling of the full fit sold online now is still immature. Fragile.

The effect of a certain treasure wmwx apple tempered film to send permanent white edge liquid is not bad, and there is no white edge when you apply it once until the next time you change the film.

There are 2 cases where there are white edges, and it is possible that the lining around you has not been torn off.

Don't buy it online and apply it in the store.

Generally speaking, the tempered film that is not fully covered will be smaller than the screen on all sides, but there is no situation where there are white edges on both sides of the tempered film. If it is full coverage, the tempered film is printed with white or black, which will cover the curved edge around the screen, so that there will be a gap between the screen and the film, and the gap is at least not white.

There is also the fact that the tempered film you bought does not meet the standards and is a defective product.

The iPhone 6 Plus is Apple's largest-screen phone ever.

Reasons why it is easy to bend:

First, the iPhone 6 Plus is prone to bending and deformation due to the large screen size, the long body, and the slimmer than in the past.

Second, the iPhone 6 does not have a high-strength metal middle frame in the design, and the back is made of aluminum metal in a large area, which is naturally prone to deformation due to insufficient hardness.

Common problems: white edge, floating edge, warped edge, top film, viscosity is not good, poor fit, uneven glass surface, touch screen failure is easy to get dirty, fingerprint residue is serious, poor texture, poor light transmittance, common problems of domestic glass, now the tempered film market is very chaotic, from 1 yuan to free shipping, from roadside vendors 10 yuan package paste, from Apple stores to hundreds of dollars, people do not know how to choose.

Whether the tempered film is good or not, it mainly depends on what glue is used, the feel and surface treatment of the film, look at the electroplating, that is, the anti-fingerprint coating, this coating is sprayed with oil to dry, after you paste it on the mobile phone, it can be used a few days ago, but it will not work after a week, the electroplating layer is worn and peeled off, resulting in fingerprint residue on the surface of the screen Dust and hand sweat, and it is not smooth to touch.

This year, there is a new film called [sapphire crystal tempered film], developed in Taiwan, the process of automobile crystal plating is used on the tempered film, in order to protect the external electroplating layer for a longer time, we all know that after the car paint glass is plated, it is bright and shiny, and it feels very smooth, which is the benefit of crystal plating. I bought it on Jingdong.,Sapphire crystal-plated tempered film,**It's enough.,I really recommend it.。

Because the Apple mobile phone is processed by multiple foundries, there is this kind of error in different foundries, and it is recommended that you use the following film to use this problem, which will be lighter! Or 3D curved tempered film, ordinary soft film!! Ordinary pseudo-fullscreen can't solve this problem!!

If you bought it in **, I still hope you don't give the seller a bad review, this kind of problem is really not a problem with the membrane!

If you get air, change the tempered film.

The appearance of white borders may be due to the following reasons:

1. The tempered film is not fully attached to the mobile phone, resulting in air ingress.

2. Maybe the film staff did not clean the mobile phone screen before, resulting in not sticking tightly, 3. Go to the mobile phone store and stick the film glue to see if there will still be white edges 4. Change a tempered film, and the original model will not be different in fitting, so that the film personnel are careful and cautious to avoid the problem of white edges again.

Screen problem, the screen of the Apple mobile phone has a curvature and a difference with the tempered film.

Fingernails are pressed once.

Dip the oil into the gap between the edges of the white edges, and after making a circle along the phone, press the edges appropriately with your hands to squeeze out the excess oil.

Precautions: It is necessary to prepare a quiet environment, the air is relatively stable, do not blow fans or air conditioners, to avoid excessive dust during the film process, and reduce the workload.

The tempered film sticker is crooked, and you can slowly tear the tempered film up and realign it again.

If you find that there is dust after pasting, pay attention to whether the dust is on the tempered film or on the screen when tearing it up, and use the dust sticker to stick the dust away.

The production of tempered film needs to be carried out in a dust-free workshop, so the tempered film is not suitable for washing or anything, and it is easy to scrap the entire tempered film.

Having a white edge means that the sensitivity is good, you can buy that kind of white edge filler oil, just wipe it off.

What should I do if there is a white edge on the mobile phone film?