Why can t my Motorola V3 connect to the computer?

Brother said a little more detailed,You should be using MPT software,If so, you need to pay attention to not plugging in the phone before installing the software,Connect to the phone after installation,At this time, you will be prompted to install the driver file,Specify the driver file under the INF folder in the drv folder under the mpt directory,The system automatically finds,Prompt successfully completed,After that, you can enjoy it。

What do you connect with? Do you use a data cable?

If you use a data cable, you need to confirm the port.

If you use Bluetooth, you have to match it well.

Just install the first season driver.

1. Moto's normal Bluetooth has the following characteristics (applicable to V3 and most moto non-smart phones):

a. It's okay to find someone else's. Basically, most mobile phones can be recognized by Moto.

b. Being difficult to find by others. If you want to be found by another Bluetooth device smoothly, be sure to: be sure to turn on the "found" function again before being found each time (you don't have to do this after you find it), and the small Bluetooth icon at the top of the screen will flash at this time (it can generally be found smoothly when flashing).

c. Files of any format cannot be transmitted. It will not accept files that are not supported by moto. L7 accepts unsupported files and even freezes.

d. When looking for hands-free devices such as headphones, the function is normal. This is not much different from other mobile phones.

2. According to your instructions, if you have turned on Bluetooth, then it is likely that your Bluetooth hardware is malfunctioning. Of course, it could also be a Bluetooth glitch on another phone.

3. Find a few more mobile phones to test, and after eliminating hardware failures, you should be able to solve the problem by referring to the above.

4. Good luck.

If you mean that your phone is not able to connect to the Internet, please check the following:

1.Check whether there is a network, it is recommended to use it in a place with a strong signal;

2.Check whether the USIM card is inserted, if it has been inserted but still cannot be used, it is recommended to go to the business hall to check whether the USIM card is faulty, or replace the card for testing;

3.Check if there is any problem with the phone, it is recommended that you change the phone for testing.

4.Check whether there is still a credit in the account, if the balance is insufficient, you need to top up before you can use it.

5.Confirm that the parameters of the mobile phone have been set.

6.If the data is capped, it will also lead to the inability to access the Internet.

If the above situation has not been resolved, you can contact Unicom's customer service for processing.

In the case of having an SD card.

After setting "--connect to the computer" -- large-capacity storage "-complete", connect the data cable to the computer, and the data can be transferred. Before touching.

In the case of no SD card, please install MPT, and then "Settings" - connect to the computer "- modem" - Complete", connect the data cable to the computer, and the data transfer can be realized.

Use third-party software to make sure that you can find out how to connect with a 360 mobile phone assistant and automatically install the required controls.

If the data cable is not well connected, it is recommended to change the data cable.

In Settings - Connections - Select "Trap Beam Data Reservoir Orange Storage" or "Memory Card" mode, and then plug it into the computer, no driver is required.

If the computer does not come out, refresh a simple shipment.

Set it on your phone and set the connection to "mass storage" in the settings.

In the case of having an SD card.

After setting "——connect to the computer" -- large-capacity orange storage memory "-complete", connect the data cable to the computer, and the data transmission of the circular disturbance beam can be realized.

In the case of no SD card, please install MPT, and then "Settings" - connect to the computer "- modem" - Complete", connect the data cable to the computer, you can talk about the data transfer.

Use third-party software, such as 360 Mobile Assistant, to detect connections and automatically install the required controls.

If the data cable is not well connected, it is recommended to change the data cable.