How to overclock, who said the specific method, I feel that the computer is not enough

Updated on number 2024-06-07
4 answers
  1. Anonymous users2024-02-11

    First of all, you should know: the main frequency of the external frequency * frequency doubling 1 Intel's CPU has locked the frequency doubling at the factory, so it can only start from the external frequency. Some AMD CPUs can be connected to L3 gold bridges to reduce the frequency doubling and increase the external frequency.

    The usual overclocking method is to increase the working frequency of the external frequency to achieve the effect of increasing the CPU frequency. At present, the standard external frequency of mainstream CPUs has (Note: 166 is already a difficult external frequency to achieve) It is best to work under the standard external frequency (explained below) 2 If it has not reached the level you want, you can increase the voltage of the CPU (Note:

    It is best to increase the amplitude each time, although the main frequency of the CPU can be broken again by adjusting the voltage, but doing so will increase the power of the CPU to increase the temperature and reduce the service life. Turning it up too high will burn, remember to be appropriate. Overclocking issues to be aware of:

    1 The most critical and most common issue is temperature. On the premise of excluding the quality problems of hardware, temperature is the biggest "enemy" of overclocking. In order to be able to overclock, many people have put a lot of effort into heat dissipation, buying a fan for a few hundred yuan, water cooling, and even using liquid nitrogen and dry ice.

    If the temperature exceeds the maximum limit of the CPU, it will burn out. 2. Set the problem alarm in the BIOS, which is generally set to 60 degrees. 3 Note: When the CPU works on non-standard external frequencies, PCI, AGP and other devices cannot work normally (the normal working frequency is 33MHz and 66MHz).

    This is the option where the motherboard is best to have a crossover or lock the PCI and AGP operating frequencies. When the CPU is 100, it is divided by 3, 133 is divided by 4, and 166 is divided by 5. 4Even if you overclock to a certain frequency and don't crash, don't be happy too soon.

    Because it is okay to be able to boot up and run several software, it does not mean that your machine must be stable. You'll have to run some big 3D games for more than an hour without crashing to be successful.

  2. Anonymous users2024-02-10

    The friend above, you can ctrl+v the information you got from there to see if it's from that era.,If you posted it 20 years ago, it's estimated that you'll be the second Gates.。 CPU frequency = frequency doubling * external frequency Prerequisites for overclocking: 1 Heat dissipation:

    Start the computer, monitor the CPU temperature, it's summer, overclocking is not recommended, it will put a lot of burden on the machine. If it's 40 degrees now, it can still be a little bit over. 2cpu:

    It is important to understand the overclocking performance of the CPU you are using, and don't blindly overclock, it is likely to burn out. 3 Motherboard: Overclocking support.

    Knowing the overclocking performance of the CPU,The following is overclocking,04The mainstream motherboards that began to have linear mediation are basically equipped with linear mediation,It is recommended to press the limit of 80% first,If necessary, you can + voltage,But to add voltage, pay attention to lock the memory frequency first,After exceeding the limit, adjust it downwards by about 10M,Maintain the stability of the CPU。 In addition, you should pay attention to the output power of the power supply, after adding voltage, the CPU power increases, the heat increases significantly, if the power output power is insufficient, it will lead to instability, restart, etc., if the heat dissipation is not good, it may lead to crashes, burning CPU and other serious consequences, it is recommended to exceed it after the summer.

  3. Anonymous users2024-02-09

    It is recommended not to overclock! Overclocking should take into account your own hardware requirements, the motherboard must have high-performance overclocking, the power supply must be sufficient, and the CPU must have good overclocking ability. Physical damage to CPU, memory, motherboard, etc.

    If the rated power of the overclocked CPU must be increased, the power supply will be supplied more power to the CPU, which is the power supply encountering the load. The memory should be changed to the frequency, otherwise it can not be overclocked smoothly, and the motherboard does not have a BIOS that is easy to overbreak, etc.

  4. Anonymous users2024-02-08

    Summer is here, overclocking is not recommended for this season, it is easy to reimburse the CPU

Related questions
7 answers2024-06-07

Microorganisms use the sugars in the raw materials to turn into sake. Therefore, in principle, all raw materials containing sugar can be used to make sake. Sugars are divided into polysaccharides and monosaccharides. >>>More

11 answers2024-06-07

The practice of two-sided steamed buns is detailed in detail Cuisine and efficacy: boutique staple food spleen appetizing recipes high blood pressure recipes anti-cancer and anti-cancer recipes arteriosclerosis recipes. >>>More

5 answers2024-06-07

The current introduction on the Internet is all about the bonus points that have reached level 60. In fact, when leveling up, I personally prefer the fire method. At least that's how I practice. >>>More

11 answers2024-06-07

The process flow of the nitrogen generator is that the air is compressed and filtered by the compressor and then enters the polymer membrane filter, resulting in different gases in the membrane with different relative permeation rates. >>>More

4 answers2024-06-07

Beat the eggs into a froth and beat them with milk.