I can t find the optical drive sweat too anonymous

First of all, your first step is to install the virtual optical drive deamontool and then uninstall it This may be removed with the driver of the optical drive, at this time your optical drive is not a problem, you can reinstall the optical drive driver to solve, the problem is in the second step, if you directly plug and unplug the optical drive power supply in the boot state, then your *** optical drive will hang up, buy a new piece.

A CD-RW is a *** one, which can be used before - indicating that the jumper is no problem.

I think you'd better restore the system.

This shouldn't have anything to do with the hardware itself, it must have messed up the drive letter. The drive letter relationship in the system registry is messed up. It's a mess back to the original relationship.

The driver is lost, the virtual optical drive will produce such a problem, you find the drive disk when you bought the optical drive and reinstall it, you may have to uninstall it first, restart, and install.

In Device Manager, right-click on the device with the exclamation mark, uninstall it, and restart your computer. It should be loaded.

When the computer is turned on, you can't plug and unplug the cable casually, so it's normal to crash.

Right-click"My computer", select"Management"and select the one on the left"Hard disk management"Let's add a partition to a partition that doesn't have a drive letter. It should be solved without a reboot. Of course, it was completely fixed after the restart.

The same goes for optical drives.

He didn't give you the drivers for the motherboard when you installed it? Try reinstalling the motherboard driver.

Ying Ai is no problem.

Or, there is a problem with the jumper settings on the back of your optical drive. Ask someone to help you tune it out.

The easiest,Remove the installed tiger optical drive in the control panel,Uninstall it cleanly,Then unplug the *** line,Restart,Then shut down,Then plug in the wire,Turn on again。

It's just that the driver is gone.,When you delete the software, delete it together.。

It's good to get back on the drive.

In fact, you can let the driver restore, open the device manager, find these two places, click the right button to open the properties, and click"Drivers", click"Go back to the driver"It's time to restore, give it a try

Uninstall all the things on the virtual optical drive.,And then delete the drivers of the optical drive.,Then turn it on and it will find itself.。

Reinstall the system.

If you don't want to, try reinstalling!

Reinstall the system and it comes out.

1. Enter safe mode, open the device manager, delete all optical drive drivers, you need to show the hidden device to delete it completely (right-click"Device Manager"-->"Check"-->"Show hidden devices"）。Then reboot, and the optical drive will usually be retrieved. If it doesn't work, just disassemble the chassis, unplug the optical drive, turn it on, turn it off, plug it in, and turn it on again.

2. If the problem persists, it may be in conflict with the virtual optical drive. After installing a virtual optical drive, it is sometimes found that the original physical optical drive is "missing" because the hardware configuration file has too few free drive letters. Workaround:

Use the notebook program that comes with Windows to open the "file" in the root directory of the C drive, add "lastdrive=z", save and exit, and restart it to solve the problem. (After installing an earlier version of the "Virtual Disc" with a dual optical drive installed, one or both physical optical drives will be "lost" in some cases!) Recommendations:

Change to a higher version or other virtual drive program. ）