You can t use the router to access the Internet, and you can dial up, is it because the router is di

No. 10000. No. 10000. Someone to help you solve the problem.

yes, so is my family, wait.

Did you turn off the router when you shut it down, then you had to enter the password again! ^^

It is possible that Telecom is bound to the starry sky, and it needs to be cracked before you can access the Internet!

It is possible to disable you can just connect 1 computer and give it a try.

If it doesn't work, it's definitely a problem with your settings.

There will be a short period of inaccessibility, but it is impossible to go unconnected for 1 hour.

Let's look for various settings and contact questions.

If the dial-up can be on, it means that the signal is normal and the moden is normal, then the problem lies in the routing, setting, and connection, which is analyzed and solved

1. Put the router to another user to try to see if the router works properly;

2. Exchange or replace all network cables, and check whether there are problems with the lines and small crystal heads;

3. Check whether the routing settings are incorrect;

4. Some areas have blocked routes, I don't know where you are, but, even if the route is blocked, only use two machines to mention first, you can still access the Internet, you can try to connect one to two machines, and some places can only go to QQ and cannot access the Internet.

5. If the above does not work, just ask the ISP (broadband).

Are you set it up? If it's not good, there is a network neighbor on the desktop to create a new network connection, and it is OK to restart the machine

That's how Netcom turned out to be during the Chinese New Year.

But after almost half a month, it was fine.

Wait.

Is the data signal on the router normal? Is it the light on the computer that passes through the router? If it doesn't light up, it means that the network card and router are not communicating with the computer, have you changed the computer?

Is the original IP address correct? In the NIC properties, set the IP address to automatically look, and the DSN part is also set automatically, which is generally fine.

Dear Telecom users, Hello!

According to your description, it may be that the crystal plug of your network cable is loose, you can click on the computer, and then open the device manager inside, find the network adapter point inside to deactivate, and then start it, maybe it's fine. If it doesn't work, you call the telecom service**. This is happening.

Hope it helps.

If you have any other questions, you can also log on to the telecommunications online business hall (consultation).

It's simple! You factory restore the router! Then set up the router, then call Telecom 10000, and activate your broadband account! When activating, you need the name of the head of the household and the ID number!

There is a problem with the route settings!

Telecom limits the number of computers connected to the Internet!

Hello, first of all, thank you for your support to China Telecom. According to your description, according to the connection or setting of your router is wrong, you can connect the broadband modem and the router according to the following figure or instructions, and then enter the **, username and password after the router in the browser address bar, you can enter the router settings page, and then enter the setup wizard - next - select pppoe - next - enter your broadband account and password - set the wireless password - restart the router.

If you need to check the bill and pay the phone bill, please log in to the online business hall of Anhui Telecom. Have a great day!

Hope mine is helpful to you and can get yours!

Hello: You first connect the device as shown below.

Then in the case of not connecting the optical modem, set the LAN port setting of the wireless router, set the IP address to it, and then connect the optical modem, and then you can enter the wireless router, and then you can set other items on the router, enter the setup wizard interface, select PPPOE dial-up Internet access to fill in the Internet account and password, this should be understood by everyone, there will be an account number when opening broadband, you can fill it in.

Hello, route settingsYou can set it up by following the steps below!

1. Connect the home network cable to the WAN port of the router, 2. Connect your computer with another network cable at one end, and connect the LAN port of your router at the other end

interface! 3. Open the computer, open the browser, enter the route login IP in the address bar, 4. Enter the route login and password in the pop-up dialog box, friendly reminder, if you don't know the route login IP, login and password.

code, you can turn the route over and look at it, and there is a writing on the back of the route!

5. After entering the routing setting interface, the quick setting interface will generally pop up, and you can select the broadband dialing method in this interface.

PPPoe, enter the Internet and password!

6. After the settings are completed, save the exit and restart the route!

Once the routing restart is complete, your routing hardware connection and setup are complete!

In addition, there is another point to remind that if your home is a ** line and there is a cat, it is recommended that you turn off the power of the cat when you set the route, and when the route is set up, turn on the power of the cat!

Once you have set up your account password on your wireless router,,, you should be fine.

Do you use a 4-port Alcatel wireless router cat?,Yes, I'll tell you in a private message.。

First, connect the routing outgoing port, then open the browser, enter enter, then enter the account name, admin password, and then enter the setup wizard - next - select pppoe - next - enter your broadband account and password - set the wireless password - restart the router.

Dear users, hello:

If you can't connect to broadband properly, there may be a problem with your wireless router settings, and it is recommended that you check your wireless router settings.

1.Plug the broadband modem or home network cable into the WLAN port of the router, and then connect to the computer through the network cable or wireless network.

3.After entering the page, you will be prompted to enter the management account, which also needs to be found in the manual, and the general account password is admin.

4.Click the Setup Wizard, follow the instructions on the page to set broadband without PPPOE dialing, and enter the broadband account password.

5.According to the prompts on the page, check the box to turn on the WiFi network, and set the password, when finished, click Next, and the device will automatically restart.

Then it must be a problem with the router or a problem with the settings.

It is recommended to factory reset your router and then set up your router again.

1. The bus of the broadband network is connected to the WAN port of the router, and the LAN port of the router is connected to the computer.

2. After starting the device, open the browser and enter it in the address bar to enter the wireless router settings interface. (If you can't get in, please look at the nameplate at the bottom of the router or the router instruction manual, the default settings of different models of routers are different.) ）

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, or refer to the manual;

4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

6. Set up step by step according to the setup wizard, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

7. Enter the password applied for from the network service provider, and go directly to the next step after the input is completed;

8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

China Telecom broadband part of the ** can not use the router, you can choose to upgrade the ** business in the Anhui Telecom online business hall, for the use of the router**.

For you to recommend the integration of 159 yuan**, the network hall for free 4m liter 8m, 160 yuan per month to share the phone bill (can be three mobile phones and a fixed phone sharing fee), now handle, deposit broadband fee to send mobile phone, send ITV (free**).

If you still have questions, please keep asking. Have a great day, thank you!

The router is to be set up, the main thing is to set up the broadband account and password, so that the router dials! Generally, the router IP is or go in and set it up.

Hehe, the telecommunications in some areas are so black that they can't be trusted The current broadband passwords are all encrypted, but there is software that can crack their passwords Do you have an email address, I will send it to you But your points are too small

Now telecom has a business that can't use broadband, and it's not cheap, black-hearted telecommunications, can't use it, can't do it, if you find someone to crack it, you may be banned, self-respect.

Is it that the router is not set up?,Sometimes Netcom may block the route.。

Dear Telecom users, Hello!

According to your description, now Anhui Telecom wired broadband can use routers to connect multiple terminals to access the Internet, it is recommended that you buy a router, and then connect it correctly to achieve multiple terminals at the same time to access the Internet, but also to avoid the time-limited broadband Internet timeout, now provide the correct router connection method for your reference: connect the network cable (or direct home line) of the cat to the router WAN interface, any interface of the LAN port of the router is connected to the computer, open InternetExplorer on the computer, Enter the correct IP address of the router (see the label on the back of the device or the manual for the default username and password), you can also refer to the router manual, enter the configuration interface of the router, and set up the router correctly according to the setup wizard. Then, connect the WAN port of the router to the modem, and connect the LAN port to other computer devices respectively, and restart all the devices, so that multiple people can access the Internet normally, and the construction of a wireless network can also be realized.

It can be used.

Telecom broadband connection router is set up is not able to access the Internet solution:

Method 1: Automatically obtain the IP and DNS settings of the computer.

XP System Setup Method:

Right-click [Click on the neighbor] [Properties] [Right-click the local connection properties] [Double-click the TPC IP protocol] and then click [Automatically get IP address].

Win7 system setting method:

Right-click [Network] Properties [Change Adapter Settings] [Local Connection] [Right-click Local Connection Properties] [Double-click TPC IP Protocol] [Then click "Automatically Get IP Address"], and then click "Automatically Get DNS" Server Address] [Click OK].

Method 2: The router is misconfigured to access the Internet.

Home Network Environment Cabling]:

1. There is a cat (modem): cat (modem) - router WAN port; The LAN port of the router --- a computer.

2. No modem: network cable --- router WAN port; The LAN port of the router --- a computer.

Computer enters the router]:

1. The computer IP and DNS settings are automatically obtained.

2. Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

Set Router Dialing]:

1. In the [Setup Wizard], select [PPPoE Dialing] (some are ADSL dialing), enter the username and password (provided by the network service provider) according to the prompts, and save.

2. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

It doesn't matter, you connect a router to your laptop, and when you set up the router, try MAC address cloning, and then clone the MAC address of your laptop to the router, so that the address of the packets sent from your home will be cloned into the address of your laptop. The specific setup method can ask the technician at the place where you bought the router to help you.

He said that if you don't let it, you don't let it, you care about him, he said not to let it because, if you connect a broadband router, you can give it to several users, which is not good for him, so it will definitely not let it, so, the route can be connected casually, but the configuration must not find them, you need to come yourself, there are manuals in the router, just follow the above step by step, it's very simple.

How can he find out? I haven't heard of a router that doesn't allow you to use a router. If you say so, how do you get Internet cafes?

Aren't they all routers? Besides, you bought a router to use in your own home, how can he check it? Did you go to your house to check?

It's okay, just use it. It's really not good, if you don't use it, you will change Netcom. My home is Netcom, and I use a wireless router.