Range Rover spare tire repair will also have a tire pressure warning

Hello, the spare tire is just a spare tire, there is no tire pressure sensor in it, even after repairing, the tire pressure monitoring system can not sense the air pressure of the vehicle's tires. So there will be a tire pressure alarm.

Hello, there is no tire pressure monitoring sensor inside the general spare tire, and the signal cannot be detected after installation, so it will alarm, it is recommended to replace the original wheel hub or replace the tire to return to normal.

Hello! The spare tire does not have a tire pressure monitoring device. A spare tire is a substitute. You need to go to the repair shop to repair the original tires within a short mileage!

Hello, there is no tire pressure monitoring device in the spare tire, if you use the spare tire, there will still be an alarm display.

After this spare tire is repaired, it is necessary to eliminate the tire pressure failure, and it will not be alarmed, so refer to it.

Hello, for this case, it is very likely that the tire pressure sensor will be damaged when removing the tire, this is recommended that you replace a tire pressure sensor and then make a match.

There is no tire pressure monitoring system in the spare tire of this vehicle. It is necessary to eliminate the fault of the tire pressure alarm so that the alarm will not continue.

The spare tire of this car, there is no tire pressure monitoring in it, and if the tire pressure is insufficient, it will not automatically alarm.

Hello, after the tires of this car are repaired, you need to match the tire pressure again, and let the repair shop deal with it.

Hello, this is going to continue to drive for a while, and the alarm will be automatically canceled, and it will not be canceled immediately.

This spare tire does not have a sensor, and this one needs to use the original tire to restore the original detection light.

First adjust the tire pressure to light load in the settings in the dashboard, after setting the light load, inflate the front tire to the rear wheel, and then drive for a distance, if the fault is not reported, the tire pressure is normal, and the reset is completed.

Notes:As a part of the car that is in direct contact with the ground, the tire is subjected to a number of performance such as the driving force and braking force of the car, and the automotive tire pressure monitoring system can not only be used as an active safety system to avoid puncture accidents caused by too high or too low tire pressure, but also can extend the service life of the tire, maintain the fuel economy of the vehicle and reduce the wear and tear of the suspension system. Therefore, the tire pressure monitoring system is very important for driving safety.

For cars, the tire pressure should be between 220kpa and 280kpa, higher than 300kpa is easy to burst the tire, and lower than 200kpa is easy to cause abnormal tire wear. However, the amount of tire pressure should be determined according to the actual model and load, which can be referred to the air pressure conversion and air pressure value posted under the B-pillar on the driver's side of the vehicle. The reference value of the barometric pressure label is the standard barometric pressure, which is the best barometric pressure that has been tested by the manufacturer.

The body system should be found from the top of the car's multi-** display panel, and the tire pressure test should be entered. Once inside, erase the original data and store the current data. That's it.

If the air pressure is completely normal, the air pressure light is still flashing, you can try to disconnect the battery power, and then connect it after a quarter of an hour; If it still can't be eliminated, the only way to do this is to use a special decoder to clear the fault code. Should this operation be handed over to a professional, or directly to a 4S shop, this kind of problem should be easily solved.

Tire pressure, strictly speaking, refers to the pressure of the air inside the tire. In car maintenance, the engine is the heart of the car, and the damage of the engine will lead to the exhaustion of the car's life, so the tire pressure is the blood pressure of the car, and the tire pressure plays a vital role in the performance and power of the car.

After entering, the body system should be found from the top of the car's multi-** display board, eliminate the original data, enter the tire pressure detection, and then store the current data.

Manual clearing.

The body system can be found on the Range Rover's multi** display panel, and you can choose to go to tyre pressure detection. In there, you can erase the original data, and finally store the current data!

As long as the four-wheel air pressure is adjusted to the tire pressure indicator, the light will not go off unless the tire pressure sensor is broken.

Summary. Pro-12 Range Rover tire pressure monitoring elimination method: 1. First of all, the light of tire pressure monitoring is on, which proves that the tire is seriously deflated or the tire is punctured.

Because if there is a little lack of air, the tire pressure monitoring light will not come on. So go to the place where the tires are repaired and check the tires well to see if the tires are pricked.

2. When the problem of the tires is solved and the gas is replenished, then eliminate the lights in the driving computer.

Press the button on the right side of the multi-function steering wheel and press the left and right function keys to pop up the settings menu.

3. Find the option of tire pressure, confirm, and then according to the prompts, there is a tire pressure that has been detected and returned to zero. Once these are done, the tire pressure monitoring light will not be on. (4) You must remember that the tires must be checked, because this is about driving safety, and you are responsible for yourself and others.)

How to eliminate Range Rover tire pressure monitoring in 12 years.

Hello, I am a co-teacher Xiaoyang, good at the field of auto repair, has been engaged in the auto repair industry for 6 years, good at analyzing problems, finding out problems and solving problems, serving customers from modification to maintenance Very detailed I have received your question, it takes a little time (3-4 minutes) to type, please wait a while, please do not end the consultation, you can also provide more information, so that I can better answer for you, I am happy to serve you

Dear hello it is a pleasure to be able to serve you according to your description、12 years Range Rover tire pressure monitoring how to eliminate as follows。

Pro-12 Range Rover tire pressure monitoring elimination method: 1. First of all, the light of tire pressure monitoring is on, which proves that the tire is seriously deflated or the tire is punctured. Because if there is a little lack of air, the tire pressure monitoring light will not come on.

So go to the place where the tires are repaired and check the tires well to see if the tires are pricked. 2. When the problem of the tires is solved and the gas is replenished, then eliminate the lights in the driving computer. Press the button on the right side of the multi-function steering wheel and press the left and right function keys to pop up the settings menu.

3. Find the option of tire pressure, confirm, and then according to the prompts, there is a tire pressure that has been detected and returned to zero. Once these are done, the tire pressure monitoring light will not be on. (4) You must remember that the tires must be checked, because this is about driving safety, and you are responsible for yourself and others.)

Pro, it's the two buttons that adjust the menu, the pro, the left and right, these two, I've released it here**, can you understand it, pro.

Hello, large headliner on the co-pilot side.

Click on the tire pressure check to check the tire pressure. To check the tire pressure reset, the Range Rover first opens the engine compartment to open the main driver's door, then press the start button to enter the vehicle power-on state, then select the maintenance menu, select tire pressure monitoring, click in and press and hold the OK button to reset. First of all, the light of the tire pressure monitoring is on, which proves that the tire is seriously flat or the tire is punctured.

Because if there is a little bit of air, the tire pressure monitoring light will not come on, and I have a punctured tire both times.

Features of 16 Range Rover carsThe grille adopts a hollow design, and the thick horizontal bar style is more luxurious, and the side lines are hard and powerful, without any bends and transitions. The details of the front face have been significantly adjusted, and the cat's claw air intake design above the fog lamps has become quite dynamic. The stiff lines create the toughest body shape of any SUV today.

The front and rear seats of the whole car are wrapped in leather material, which makes the ride a pleasure with good wrapping and softness, and the breathability of the leather also increases the comfort of the ride. It is powered by a V8 engine that delivers an astonishing 600 Nm of torque and 245 hp of power, with a load-bearing body and front and rear air suspension.

Range Rover. Tire pressure reset is done using the steering wheel.

This function is used to remind the driver that there is abnormal tire pressure in the car, which needs to be dealt with in time, and the specific operation steps are as follows:

1. Press the Range Rover's brake pedal to prepare to start the engine.

2. Press the Range Rover's one-button start button.

3. The instrument lights of the Range Rover are all lit up, which proves that the engine of the Range Rover is started.

4. Press the instrument function switch button on the Range Rover steering wheel.

Fifth, bring up the tire pressure detection interface.

6. Press the confirmation number button to reset the tire pressure.