How to draw smooth lines in PS

PS The pen tool can not only draw smooth straight lines, but also draw curves, turning curves, etc., and is also very widely used in practical applications. Here are a few ways to use the PS Pen Tool in detail with a view:

First, understand the composition of the pen tool path: it is composed of several elements such as path anchor points, path segments, direction points, and direction lines.

Pen tool to draw straight lines.

Create a white canvas, select the Pen tool, and left-click on the canvas to draw a straight line. Each time you click to add an anchor point, there is a straight segment between two adjacent anchor points.

Draw multiple discrete paths, and once you've drawn a path, hold down the Ctrl key and click on an empty space, then move on to the next one.

While drawing a straight path, hold down the shift key at the same time to draw a smooth horizontal, vertical, or 45-degree angle.

2.Pen tool to draw curves:

When you click on the canvas to determine the first anchor point, and then determine the second anchor point on the canvas, drag it directly without releasing the left button, and you can draw a smooth curve as needed.

3.Pen tool to draw a curve: first use the method of drawing a smooth curve to draw a smooth curve, and in the process of dragging the mouse, press the alt key to achieve the effect of a corner between the two curves.

Note: It is generally difficult to draw a path in place at one time, and the drawn path can be adjusted through the Convert Point tool (also in the Pen Tool tool set). Adjustment method:

After selecting the Conversion Point tool, click on the path, and a small hollow circle (anchor point) will appear on the path, which can be adjusted by holding down the anchor point and dragging the mouse.

Now that you know how to draw lines with the Pen Tool, let's talk about how to draw beautiful color lines with the Pen Tool:

1.Create a new layer (or open one) with a custom background.

<>3.Select the Pen tool to set up the foreground color and draw one or more curves. Right-click the mouse, select the stroke path, select the brush, check the simulated pressure, click OK, press the enter key to cancel the trace, and you can draw any beautiful line.

Add layer styles to the blending options, and try out all kinds of options, which will have different effects.

When you hold down the shift key when drawing, the line drawn must be straight, whether you use a brush, pen tool or anything I hope it will help you.

You don't need to close the path to change it.

You can go to the Paths panel and select the route layer you want to modify with the Pen Tool.

Use the Pen tool to draw curves without releasing the left button as you draw. Combined with the Alt key, smooth adjustments.

When you're done with the curves, adjust options such as the thickness of the brush.

Stroke the path, choose whether to use a brush or pencil, and more.

Effect when finished.

Save the current path and call it again when you need to make adjustments to the curve.

PS How to smooth the zigzag lines, how to operate, let's take a look.

1. First of all, open PS in your computer and click on the Magic Wand tool, as shown in the figure below.

2. At this time, after selecting the graphic, click to select, as shown in the figure below.

3. Then in the drop-down options that open, click Modify, as shown in the figure below.

4. Then in the options that open, click on Feather, as shown in the image below.

5. Finally, in the open window, enter the feathering radius, click OK, you need to repeat the feathering steps to smooth the edges.

Create a new canvas, then click on the Ellipse Marquee tool to draw a selection, check "Anti-aliasing", and fill in the color;

In --Preferences--General, make sure that the Image Interpolation is "Bi-Cubic" (mainly for Smooth Gradients).

If it is a logo that has been made, or materials on the Internet**, you need to use the pen tool to cut out the image, which can ensure that the edges of the graphics are smooth and free of jaggedness.

After that, uncheck the "Anti-aliasing" check, and create a selection to fill in the color. At this time, it can be seen in contrast.

Hello, I have seen your question and am sorting out the answer, please wait a while P.S. LinesDo you mean that you need to be sleek when drawing?

1. First of all, select the ** you want to be smooth, right-click the mouse, select open with ps in the "Open Method", as shown in the figure below, and then enter the next step. 2. Secondly, after completing the above steps, choose to copy the background layer by pressing "Ctrl + J" on your keyboard and proceed to the next step. 3. Then, after completing the above steps, select the "Rounded Rectangle Tool" option in the left toolbar, then switch to "Path" at the top and proceed to the next step.

4. Then, after completing the above steps, draw a smooth rectangle in **, click the "Select" button, set the value of the "Feather Radius" option to "0" pixels in the pop-up "Create Selection" dialog box, and then click the "OK" button, the selection of the smooth rectangle is completed, and then enter the next step. 5. Finally, after completing the above steps, if you feel that the fillet is not smooth enough, click "Select" - Modify "--Smooth" option in turn, and then set the sampling radius as you need. In this way, the problem is solved.

If you need to adjust the brush to make it smooth, you can adjust the Smoothing value above it to make it bigger and the lines will become less arbitrary

The operation method and detailed steps of PS line smoothing are as follows:

2. Secondly, after completing the above steps, choose to copy the background layer by pressing "Ctrl + J" on your keyboard as shown in the image below, and then proceed to the next step.

3. Then, after completing the above steps, select the "Rounded Rectangle Tool" option in the left Yanhui toolbar, and then switch to "Path" at the top, as shown in the image below, and then enter the next step.

4. Then, after completing the above steps, draw a smooth rectangle in **, click the "Select" button, set the value of the "Feather Radius" option to "0" pixels in the pop-up "Create Selection" dialog box, and then click the "OK" button, the selection of the smooth rectangle is completed, as shown in the following figure, and then enter the next stool answer step.

5. Finally, after completing the above steps, if you feel that the fillet is not smooth enough, click "Select" - Modify "--Smooth" option in turn, and then set the sampling radius as you need, as shown in the following figure. With this rough pattern, the problem is solved.

1. Select the ** that needs to be smoothed, right-click, and then open the way to select PS.

2. We choose to copy the background layer by pressing Ctrl+J on the keyboard.

3. Select "Rectangle Tool" in the left toolbar, and then switch to "Path" at the top.

4. Draw a sleek rectangle in **, click the "Select" button, set the feathering radius to 0 in the pop-up "Create Socks Selection" dialog box, click the "OK" button, and the sleek rectangle selection is created.

5. If you feel that the rounded corners are not smooth enough, please click "Modify Smoothing" in the "Select" menu bar, and the sampling radius will be set according to your needs.

PS is very powerful, not only to achieve all kinds of whimsical effects, but also to complete hand-drawn effects. In hand-drawn **, it can be said that curves are a very commonly used kind of lines.

First open the Photoshop software, and then open or create a new one**;

Then select the Brush tool in the toolbar, and below you can adjust the brush color by selecting the foreground color; Here we choose green.

We can draw according to the answer.

to set the parameters of the brush, such as size, hardness, nib mode, etc.

Select the layer you want to draw a curve on, then hold down the mouse to draw the curve you want in the image. The color, thickness, and shape of the curve are related to the settings we made earlier. If you want to change it, you can change the settings directly.

The depiction of curves depends on our proficiency in drawing with the mouse, and if we are proficient, we can achieve the general effect of hand-drawing using the brush tool of PS.

PS curve how to draw is actually very simple, as long as you use the brush tool to complete any color, any shape of the curve. Drawing curves is the basic function of a brush, we can draw shapes by hand with a brush, scrolling at the handwritten font, as long as we are diligent in practice, PS's painting and pen can also be the same as the brush in reality, to help us depict the picture in our hearts, but also for the design of PS, add more diversification, more display of painting skills.

ps: How to draw lines

Select the brush, hold down the shift key, and drag the mouse to draw a straight line. The following describes the specific operation method for reference:

1. First open the PS software, then click File, and then click New.

2. In the pop-up window, set the width and height, and then click OK.

3. After creating a new blank page, click on the toolbar on the left and select the Brush tool.

4. Move the brush tool to a blank page and hold down the left mouse button and the shift key on the keyboard at the same time.

5. Finally, drag the mouse to draw a straight line.

PS is widely used, in images, graphics, text, publishing and other aspects are involved, PS software has a wide range of functions, often used in the post-processing of still life products; It is widely used in advertising, magazines, graphic design, e-commerce, portrait retouching and other fields; Therefore, after learning PS, you can engage in many design jobs, such as e-commerce designer, graphic designer and so on.

Two. P.S. Draw the lines you want like this:

1. Open PS, click New, select a template, and click Create.

2. Select the pencil tool on the left side to set the pencil color.

3. First, select a point, hold shift, and click the next point to pull a straight line between the two points.

Photoshop's expertise lies in image processing, not graphic creation.

Image processing is the processing of existing bitmap images and the application of some special effects, which focuses on the processing of images; Graphic creation software is to design graphics according to their own ideas, using vector graphics, etc.

Graphic design is the most widely used field of Photoshop, whether it is a book cover, a poster, a poster, these graphic prints usually need Photoshop software to process the image.

1. Step 1: Open the PS software, select "File - New" in the menu bar, create a new canvas, and set the size of the book.

2. Step 2: Click on the position marked by the red wireframe to create a new group pose and call a transparent layer.

3. Step 3: Select "Brush Tool" in the left toolbar

4. Step 4: In the upper left corner of the work window, set the size and hardness of the brush, respectively: 5 pixels and 100%.

5. Step 5: Hold down the shift key and drag the mouse at the same time to draw a straight line on the canvas.

1. Open the PS software and select "Pen Tool" in the left toolbar.

2. The pen tool is completed by anchor points and auxiliary lines, and it is necessary to determine the points and then adjust the auxiliary lines to obtain the corresponding curve arc.

3. Draw the curve through the anchor point and adjustment according to your personal needs, and switch to the "Path" interface (the position marked by the red wireframe) after drawing.

4. Double-click the marked position in the red box on the right to pop up the "Storage Path" dialog box, and click the "OK" button to complete the operation.