What s the matter with the lights on at home, but the socket is out of power

The lights are on at home, but there is no electricity at the outlet, what is the reason for this? Generally, the socket lighting is separated, the lighting electricity is a separate independent air power supply, and the socket is controlled by leakage protection, so you should check whether the air opening in the distribution box is tripped, or damaged, if the damaged movement is replaced, this problem can be solved.

Under normal circumstances, the lights and sockets at home take two lines respectively, and the lights at home are on to indicate that the light line is not faulty, and the socket is out of power, because the socket line is faulty, or the leakage protector is tripped. You can check the leakage protector and it will be solved.

The lighting has electricity, the socket is out of power should be the circuit breaker in the distribution box tripped, find the distribution box to open, see which leakage circuit breaker tripped, press the reset button (small square) on the surface of the leakage circuit breaker, close the power can have electricity, if you can't close the switch, the output plug of the socket will be unplugged, in closing, after closing, connect the plug one by one, connect which one trips again, which electrical appliance is faulty, exit the fault electrical appliance and repair it separately.

It is possible that the leakage protector at home has tripped, and once it has tripped, all the sockets in the home will be without power.

It is also possible that the socket at home has been damaged, and once the socket is broken, it will also lead to the problem that it will not be powered on.

The lights are on at home and the socket is out of power because the power switch of the socket has tripped.

The solution is to close the power supply of the socket and turn it on, which can solve this problem.

The possible reason is that the socket is broken, or the wiring of the socket is faulty! If you find this a little inspiring, please click on the "...."Click again" and "two words!"

This is normal! Nowadays, most home decorations will separate the "lighting" and "sockets" to prevent interference with each other! If the lights are on in your home and the socket is out of power, just check the wiring of the socket and you can solve it! aqui te amo。

Hello, in this case, first check whether the air switch trips, and then disassemble the socket to see if the wire behind is virtually connected.

It is recommended to check whether the switch of the socket has tripped.

Summary. The lamp has an electrical socket and no electricity is what is going on as follows;

1.This is usually due to a short circuit in the electrical cord of the power plug, whose socket is not on the same line as the lighting fixture.

2.If there is a line fault in the power socket, check whether the power switch is short-circuited, and if so, please replace it with a new power supply.

3.If the socket is old, one socket will be out of power, but the light will be electric.

4.The power plug is not turned on (some plugs have an automatic control switch).

5.A dedicated voltmeter is used to measure whether there are wires inside the plug. If there is a problem with the outlet, it will also cause a power outage. If the wires of the power plug are burned, the internal power supply will be de-energized.

6.If it doesn't work, the fuse is broken and have an electrician repair.

7.This is because of a wire failure at one of the outlets. There are two wires connected between the plug and the lamp, if there is a problem with the socket, it will not affect the normal operation of the lamp, but it will show that there is no electricity.

If this is the case, check the power supply for a short circuit before replacing it with a new one.

8.The lamp and the power of the outlet are not on the same branch, but are controlled by two air switches.

9.The above situation shows that these are two routes, that is, the exit is one.

All the outlets in the house are out of power, but the lights are on what is going on.

The lamp has an electrical socket and no electricity is what is going on as follows; 1.This is usually due to a short circuit in the electrical cord of the power plug, whose socket is not on the same line as the lighting fixture. 2.

If there is a line fault in the power socket, check whether the power switch is short-circuited, and if so, please replace it with a new power supply. 3.If the socket is old, one socket will be out of power, but the light will be electric.

4.The power plug is not turned on (some plugs have an automatic control switch). 5.

A dedicated voltmeter is used to measure whether there are wires inside the plug. If there is a problem with the outlet, it will also cause a power outage. If the wires of the power plug are burned, the internal power supply will be de-energized.

6.If it doesn't work, the fuse is broken and have an electrician repair. 7.

This is because of a wire failure at one of the outlets. There are two wires connected between the plug and the lamp, if there is a problem with the socket, it will not affect the normal operation of the lamp, but it will show that there is no electricity. If this is the case, check the power supply for a short circuit before replacing it with a new one.

8.The lamp and the power of the outlet are not on the same branch, but are controlled by two air switches. 9.

The above situation shows that these are two routes, that is, the exit is one.

After the end of the upper right corner, please give a like, thank you.

First of all, standardize the wiring, lighting (lights) and sockets are divided into different lines, that is, controlled by different air switches, socket lines tripped, and the lamp lines did not trip, so it is normal for the socket to have no electric lights and electricity.

Check the total distribution box, whether there is an air switch tripped, if there is a push up, if pushed up and jumped down, it means that the electrical appliances in the socket line are leaking or short-circuited, and the fault needs to be eliminated and then pushed the brake.

The lights at home are out of power, the socket is powered, whether all the lights are out of power, is to check whether the lighting in the gate box has jumped, or the wire is loose and has not been in contact, because now the general lighting and sockets, air conditioners, kitchens, and bathrooms are installed separately with air switches.

The socket and the light are not the same line!

The socket may have individually controlled switches. Go to the gate box to see if there is any tripping.

1: The insurance of the socket is off (now the general lighting and socket of the residential room and the air conditioning socket are separated) 2: The socket is not plugged in (check whether there is poor contact at both ends) 3:

The socket is broken (the socket is aging, and there is a possibility of disconnection inside) 4: The switch on the socket is not turned on (some sockets have their own switch control) 5: Wait, it will be fine after a while (if someone misses you, God will inform you in this way).

The wire is broken or incorrectly wired.

Summary. Hello, if the lights in the house can be on, but there is no power in all the sockets, then it may be caused by the following reasons:1

Switch disconnection: It may be that the lamp and socket are on different circuits, and the light is on at this time, it does not mean that the socket can be energized, it may be that the circuit switch where the socket is located is tripped or faulty. 2.

Blowing or fuse blowing: Adding a fuse or fuse to a circuit is a way to protect the circuit equipment, when the current in the circuit exceeds the set value, the fuse or fuse will blow out, at which point the socket will not work. 3.

Faulty ground wire: If the ground wire is disconnected or malfunctioning, it may cause the outlet to not work properly. 4.

Poor wire contact: Poor wire contact can also cause the socket to not work properly, and this fault requires checking the connector of the wire. If none of the above happens, then it is advisable to have a professional electrician check to determine the true cause of the problem.

In order to ensure the safety of your electricity, do not try to make repairs yourself.

Hello, if the lights in the house can be on, but there is no power in all the sockets, then it may be caused by the following reasons:1Switch Break:

It may be that the lamp and socket are on different circuits, and the light is on at this time does not mean that the socket can be energized, and it may be that the circuit switch where the socket is located has tripped or failed. 2.Blown or blown fuse:

Adding a fuse or fuse to a circuit is a way to protect circuit equipment, when the current in the circuit exceeds the set value, the fuse or fuse will blow out, and the socket will not work. 3.Ground fault:

If the ground wire is disconnected or malfunctioning, it may cause the outlet to not work properly. 4.Poor wire contact:

Poor wire contact can also cause the socket to not work properly, and this fault requires checking the connector of the wire. If none of the above happens, then it is advisable to have a professional electrician check to determine the true cause of the problem. In order to ensure the safety of your electricity, do not try to make repairs yourself.

There is one, a leakage protection switch, there is a green button on it, and I accidentally pressed it and it ran out of power.

I pressed it a few times in the back and it still didn't have power.

There is also a yellow one, I also pressed the button, but it didn't work.

Judging from your description, it may be that the pure rot tripped or the leakage protector tripped. You can check by following these steps:1

Check whether the circuit warranty fuse is blown, and if so, the fuse can be replaced. 2.Check the leakage protector to confirm whether the leakage protector trips.

If it trips, you can try to reset the leakage protector. 3.Check the socket to see if there is no power to the socket due to a short circuit in a plug.

4.If there is no problem with the above inspections, it is recommended to ask a professional electrician for maintenance to ensure the safety of the circuit. Please note that circuit safety is very important, and if you are unsure of how to handle it or do not have the knowledge, it is important to seek the assistance of a professional electrician.

Summary. 1. The reason why the light is on, but the socket has no electricity, is mainly because the socket and the lamp in your home are not the same circuit, so it will not be affected. If there is a problem with the switch that controls the socket at home, such as a tripping situation, it will cause the socket to have no power, but the light is on.

Dear, the reason why the lights at home can be lit but all the sockets are out of power:

1. The reason why the light is on, but the socket has no electricity, is mainly because the socket and the lamp in your home are not the same circuit, so it will not be affected. If there is a problem with the switch that controls the socket at home, such as a tripping situation, it will cause the socket to have no power, but the light is on.

2. Use a professional voltage instrument to measure whether there is a wiring problem in the socket. If the socket fails, it will also lead to no electricity. If the wires of the socket have been burned, it will directly cause no electricity inside the socket.

3. Many people's socket wires are arranged in the wall, but if there are some problems inside the wall, the wires will be damaged. For example, if there is a crack in the wall, there is some pulling force that will pull off the wire, which will cause the wire to be damaged and the socket to have no power.