What is the reason why the movement is not controlled by the head?

If the behavior is not controlled by the brain, then it is considered that there is a certain relationship between one's own living habits and work and rest rules, which may be due to overwork in the recent period or often staying up late, then it will cause nervous disorders, resulting in uncoordinated limbs and limbs, and the behavior is not controlled by the brain. It is recommended to take neurotrophic drugs, such as methylcobalamin tablets, during this period. If this kind of phenomenon often occurs, it is necessary to go to the neurology department for a check-up in time and pay attention to a reasonable diet.

The movement is not controlled by the head, because um is very skillful in doing it, and inertia has been formed.

This depends on what you think, you can calm down, see what you need, and then give yourself a task every day, and stick to it every day, so that you can slowly develop execution, which is very important!

It's not that you didn't think of a way, you just dared to try, you were afraid that you would make a mistake and lose her completely.

Your annoyance is that you're thinking too much.

Because the things in your head that you don't think are important, they are things to do and not to do, there's no real motivation, so when there's something else you forget.

I think you should have a calm mindset, have a plan for everything, prioritize everything, and get it done one by one.

Just talk about it, don't make a fake trick. Aren't you a giant in words and a dwarf in action!

I don't have confidence, I really want to do it and I think I can succeed, but I don't do it.

That's because you're not at the end of your rope.

He was not sure if he would succeed.

It's not all, his slow movement is his slow movement, but it does not affect his thinking and brain, just like some children are usually slow, but they are very smart and flexible. It's just that it's more difficult to learn knowledge if you move slowly.

The production process of electricity is extremely complex, with multiple processes such as power generation, transmission, distribution, and consumption. Among them, power generation refers to the place where electric energy is produced, such as: thermal power units, hydropower units, etc.; Transmission refers to the operation of using high-voltage lines to complete power transmission; Substation refers to the use of high-voltage substation to convert high-voltage voltage, ultra-high-voltage voltage and other electrical energy into low-voltage electrical energy; Distribution is the final step, which reduces the voltage and delivers the electricity to the consumer.

The power transmission and transformation project of the power system attaches importance to the two steps of transmission and transformation. With the rapid increase in China's electricity demand, there is an urgent need for power system transmission and transformation projects to undertake the transmission and transmission of the power system. A number of power transmission and transformation projects together constitute the main frame of China's power grid.

At this stage, China's power transmission and transformation projects generally have multiple voltage levels such as 110kv, 220kv, 330kv, 500kv, etc., of which 220kv is used more frequently in China; 330kV is commonly found in China's northwest power grid; The 500kV level is the highest, and the requirements for cost, capacity, and process are higher and more advanced. At present, China attaches great importance to the construction of 500kV power grid, which is the backbone of China's power grid. Power transmission and transformation engineering is an important engineering project in the construction of the main grid of the power grid, including transmission line engineering and substation engineering, which requires high costs, extremely complex engineering construction, and high construction technical requirements.

Power transmission and transformation projects generally include electrical installation, communication and automation, civil engineering, electrical equipment commissioning, system start-up and commissioning, etc. Among them, electrical installation includes the installation of primary equipment such as high-voltage equipment, and also includes the wiring and installation of secondary equipment such as protection and control systems; Communication and automation refers to communication engineering and substation automation; Civil engineering covers equipment foundation, building engineering, four-way and one-level, frame foundation, etc.; The commissioning of electrical equipment is to test and adjust the installed primary equipment and secondary equipment; System start-up and commissioning refers to the start-up and commissioning of the operation of transmission lines and substations after the construction of power transmission and transformation projects. The status quo of power system power transmission and transformation project management does not pay attention to the coordination of the project scheduleThe power system power transmission and transformation project is very different from other projects, and the requirements of the power system power transmission and transformation project are higher, and the construction progress is required to be carried out in strict accordance with the specified requirements to ensure that the project construction is completed on time.

At this stage, most of China's power enterprises do not pay attention to the management and coordination of the progress of power transmission and transformation projects, which seriously affects the quality of the project, which not only reduces the ability of construction personnel and engineers to control the progress of the project, but also has a great impact on the efficiency and quality of the project. A small number of power transmission and transformation projects only pay attention to the progress of the project, and lack the supervision of the project quality, resulting in the problem of urban power shortage.

Discharge cooling is another type of convection cooling. Unlike regenerative cooling, the coolant used for exhaust cooling absorbs heat to the thrust chamber and is discharged out of the combustion chamber instead of entering the combustion chamber to participate in combustion. Direct drain coolant reduces the thrust chamber specific impulse, so the coolant flow for drain cooling needs to be minimized while only using drain cooling at the outlet section of the nozzle that is relatively less heated.

There is also radiative cooling, in which the heat flow is transferred from the combustion products to the thrust chamber, and then the heat is radiated by the thrust chamber wall to the surrounding space. Radiative cooling is characterized by simplicity and small structural mass. It is mainly used in the extension section of large nozzles and the thrust chamber of small thrust engines using high-temperature resistant materials.

When cooling in the thrust chamber of the tissue, a relatively low temperature liquid or gas protective layer is established on the surface of the thrust chamber wall to reduce the heat flow to the thrust chamber wall, reduce the wall temperature, and achieve cooling. Internal cooling is mainly divided into three methods: internal cooling (shield cooling), membrane cooling and diaphoretic cooling of head tissues. After the internal cooling measures are adopted in the thrust chamber, the mixing ratio near the wall of the combustion chamber is different from the optimal mixing ratio in the central area (in most cases, the near-wall layer rich in fuel is used) due to the need to reduce the temperature of the protective layer, resulting in the uneven distribution of the mixing ratio along the cross-section of the combustion chamber, so that the combustion efficiency is reduced to a certain extent.

Membrane cooling is similar to shield cooling in that it cools the thrust chamber wall by establishing a uniform and stable coolant film or air film protective layer near the inner wall surface, except that the coolant used to establish the protective layer is not injected by the injector, but is supplied through a special cooling belt. The cooling band is generally arranged in a cross-section of the combustion chamber or the convergence section of the nozzle. There can be several cooling bands along the length of the combustion chamber.

In order to improve the stability of the membrane, the coolant often flows through the gaps or small holes in the cooling belts, and when sweating is used, the thrust chamber wall or part of the inner wall is made of porous material with a pore diameter of tens of microns. Porous materials are usually sintered with metal powders or pressed with metal mesh. In this case, the number of pores per unit area is increased by making the micropores in the material as evenly distributed as possible.

The liquid coolant penetrates into the inner wall, creating a protective film that reduces the density of the heat transferred to the wall. When the flow rate of liquid coolant used for sweat cooling is above a certain threshold, a liquid film is formed near the wall of the thrust chamber. When the coolant flow rate is below the critical flow, the inner wall temperature will be higher than the coolant boiling point at the current pressure, and some or all of the coolant will evaporate, forming an air film.

In addition to the above thermal protection, there are other thermal protection methods such as: ablation cooling, thermal insulation cooling, hot melt cooling and composite protection of chamber walls. 3. Thermal protection scheme of high enthalpy gas generator Based on the above methods and the actual situation, the thermal protection method of high enthalpy gas generator is obtained.

The combustion chamber of a high-enthalpy gas generator differs from that of a liquid rocket engine, eliminating the front thrust chamber part, making its structure simpler and more effective. Then, the thermal protection involved is the thermal protection part of the combustion chamber wall. As the fuel enters the combustion chamber, it quickly decomposes and releases large quantities.

There's no problem with my brain, but I always talk about other people.

It could be that there is too much negative energy.

Too much jealousy.

Or maybe it's just finding a sense of presence again.

This situation has something to do with the person's personality.

So advised. It doesn't matter if someone else is doing good or bad.

There's no need to bother.

Because we can't change what other people do.

You can only do your best.

This is an obvious joke, this kind of person is not worth associating.

Hello! This is a symptom of cerebral infarction, if the onset time is not long, taking Chinese medicine to promote blood and thrombolysis can be improved, at least you can live independently. The surgery didn't work, so the doctor recommended that you do it?

Now the most important thing is comprehensive ****, the key is to remove hematoma and thrombosis, dredge blood vessels, reduce lesion necrosis, and reduce sequelae.

Ischemic cerebrovascular disease (cerebral thrombosis cerebral infarction): After passing the acute stage, most patients are left with varying degrees of sequelae, which requires timely treatment to improve the quality of life of patients. First of all, control the blood pressure, control the blood pressure at a reasonable level, and at the same time take oral aspirin 100-150mg anticoagulation every night (must be taken for life), which is conducive to recovery and prevention**; Combined with the advantages of Chinese medicine in disease prevention and treatment, the combination of Chinese and Western medicine can improve the efficacy and restore patients to the best state.

Traditional Chinese Medicine: "Brain Xuetong Oral Liquid" (Chinese Medicine Prescription Drug) is composed of pure Chinese herbal medicine; Promote blood circulation and eliminate blood stasis, relax meridians and activate meridians, dissolve thrombolysis and awaken the brain, lower blood pressure, lower blood lipids, reduce blood viscosity, alleviate arteriosclerosis, restore arterial elasticity, improve blood circulation, remove impurities in the blood, and effectively prevent cerebral hemorrhage, cerebral thrombosis and cerebral infarction; Relieve the precursor symptoms of stroke such as high blood pressure with dizziness, heavy tongue, numbness of hands and feet, and unsteady walking; It has a good **** effect on the sequelae of stroke, slurred speech, crooked mouth and eyes, salivation at the corners of the mouth, numbness of hands and feet, hemiplegia, and hemiplegia; In particular, it has a prominent effect on cerebral thrombotic hemiplegia (cerebral infarction), fills the gap in thrombolysis and clinical practice after the thrombolysis time window, greatly improves the efficacy, reduces disability, and improves the quality of life of patients.

Acupuncture: According to ** and sequelae symptoms, reasonable acupuncture points are allocated to promote functional recovery.

Massage: help the patient turn over, stretch the upper limbs, do stubborn exercises on the lower limbs, and massage the muscles and joints of the paralyzed limbs to prevent stiffness and atrophy; Control infections and prevent pressure sores from developing.

Medicated bath: through epidermal absorption, improve local blood circulation, speed up**.

Training: Strengthen cognition, memory, language, swallowing, motor function training: help functional recovery.

Strengthen confidence and control mood swings: Inform patients that as long as they persist, they will definitely get better, so that they can be calm and conducive to recovery.

Develop good living habits: regular life, regular daily life, regular medication, low-salt and low-fat diet, no smoking, no drinking, appropriate exercise and work, pay attention to rest and sleep.

Regular check-ups, so that there is no disease prevention, early treatment. Effective prevention**.

If you need to consult directly. Good luck soon**!

That's a good thing. Don't stifle his imagination.

Method: Bootstrapping.

How to do it: Arouse his interest in learning. Appropriate extracurricular reading, such as isn't he interested in the stress universe? Then tell him to learn physics well.

Focus: Make friends with your child. The premise is not to think that the child is naïve, that the child does not understand anything.

If you have this kind of thought, even if you don't say it, the child will definitely feel it. If you already have this kind of thinking, you need to correct your thinking first. Children do not listen to adults, generally not because he thinks that adults are wrong, but because children feel that adults do not understand them, so they retaliate and respond to adults' incomprehension by disobedience.

If you let your child feel that you understand him and genuinely value his feelings, he will take your words seriously. In other words, you value your child's feelings, and feelings will value your feelings. Don't impose your own values on your children, it will only backfire.

The child is in a daze and thinks about the problem. Don't force your child to tell you everything he thinks. At this time, children have their own personality and their own inner world, and even parents cannot enter it at will.

A child's grades don't tell the whole story. The most important thing is the emotional intelligence of the child. The ability to face problems and solve problems, the ability to face oneself and control oneself. Ability to withstand pressure and frustration, etc.

If adults only focus on pressure, studying becomes a burden. Think about adults, even if they are psychologically mature, if they want adults to do things they don't want to do, it is difficult for adults to do well, let alone children. So the first thing is not to talk about the importance of learning to your child, it's useless.

Instead, get rid of the child's burden first and find a way to arouse his interest in learning.

You can find specific methods online, many of them.

When you have an idea in the future, don't rush into action, let it go for a day or two, and wait for that enthusiasm.

Whenever something happens, don't be in a hurry to talk, smoke a cigarette and then think about how to do it.

It's good to be very active, but you also need to have a good friend to help you, think and be calm. As the saying goes: plan before you act.

It's normal, when you sleep, your brain is only conscious, but you are aware of your current state, and you don't send a signal to do something, so even if you want to move, it's useless, and there is no signal to pass it. On the contrary, sometimes when you have a nightmare, your brain may subconsciously send a signal, and you will be scared to wake up.