Billiards is a low stick, why do I hit the white ball and jump

See for yourself, or if there is a problem with a shot! This allows you to use a single ball to hit parallel to the end of the vault, the ball bounces back to the bottom of the middle vault to hit the club and your ball plays solid. It's not so simple to have a low game, sometimes you can't force it, you don't want to force the ball and it's far more, why?

Your rod is too hard when you are pushing. , really hit a low shot and you feel like the ball seems to be soft and feels like a ball of dough. Again, the club must be malleable.

Shot. The frame should try to be billiards for the player is very important to be level with the ball, a game master, when you pay attention to look at it! The above may also be one of the reasons.

This is a common problem that occurs when you play a cue playing white ball billiards beginners playing low shot upturned or slider, and the solution is:1. Rub the shell powder for each stroke, avoiding the slider lowering the holding rod to hit in a horizontal direction (very important, combined with 4:

00) 3 Aim at the white ball hit point, quickly and decisively club, club play four shots without catching the live cue (many people are afraid of the club, if you don't catch the club, the club will run out), let it continue to move forward based on inertia.

Doing the above four points, you will play the beautiful low shot, so the theory, experience and practice only to discover this problem, in order to improve the practice.

Wordplay oh, enough sincerity.

You're putting the bar too low. Slightly higher. Can't tow the bar.

Pay attention to the position and strength of the clubhead contact with the ball when the shot is released, as well as the stability of the club, and do not press down on the club.

Don't go too low and hit in the middle of the lower hemisphere.

How can I make the white ball not jump when I hit a low game in a billiard? We don't need to use too much force, if it's too big, a miracle will happen, and then the white ball will jump naturally.

The force of the striker should be reduced and the angle of the pool ball should be controlled so that the white ball does not jump.

When hitting this kind of ball, the center of the club should be aligned with the center of the white ball so that it does not cause the white ball to jump.

Don't know what level you are? If you already know how to play a low game, it is recommended to pay attention to the way of charging and the extension of the clubhead, the kind of pause you said quickly pull back I can also play, not every time can come out, the wrist to hit the penetration requirements are very high, I have also hit the white ball hit the target ball after the white ball to follow up half a ball position, and then pull back the situation, the requirements for the table are also high, practice more.

That's the reason why you exert your force, it may be that you are not doing it in the right way, first of all, the head of the club should be low, and then the speed of the hand is slow and then fast, and the cue ball should be pierced and then extended by half a ball, so that the effect is the best, and the head of the club should be scratched by the mud after playing the low game, just like the feeling of writing with chalk on the blackboard, the pull rod is not very close to the target ball, and the club should be pressed out of a certain deformation, so the effect is the best, but it depends on the hardness of the club you use, there is a saying that there is no deformation of the club, The effect of the stopper is not obvious, I hope you adopt it.

If you want to ask for a gorgeous low bar, just master a few points 1: shake your wrist. 2: The rod should be extended. 3: Be thorough.

The shaft is lowered as a whole, not just the head. Then dribble at a constant speed, and when hitting the ball and dribbling, you must have the feeling of piercing the ball, hehe.

It's very simple, you won't use force, and there are three parts of playing power: forearm, wrist, and fingers.

If you don't know how to use your fingers, you won't easily use a variety of strokes, and if you use a force, it will affect the point of hitting the ball, and you must find an experienced master to help you modify the stroke, which is a change in the wrist and fingers.

Nine-ball diva Pan Xiaoting billiards teaching.

Let me tell you in very concise and popular terms

To play a low shot.

Your stroke should be mature (the stroke should be steady).

If you're out of the shot is very stable.

Follow the method below.

You'll have no trouble experiencing the art of low par

You try to lay the cue flat (as close to the table as possible) and hit the cue ball (i.e. the white ball) directly below (the unplugged style of play), and penetrate (the so-called penetration: after the cue ball stays at the position where the skin of your cue ball stays, it feels like stabbing an apple with a cue club).

pierce it), the speed of the shot should be fast, and then you can enjoy the cue ball rolling backwards The lower the hitting point (to be appropriate, otherwise it will jump the ball), the farther the cue ball retreats; The faster the shot, the farther the cue ball retreats.

Then I'll explain to you again why you asked

Why do you want to penetrate, that is, keep going a little bit, as you say?

Because you ask for the thrust of the rod against the white ball.

The longer the effect.

The faster the white ball whirls. Physics: The Problem of the Time of Action of Force

Sometimes the force hits the low point but does not shrink but freezes, it is said that the power has not been transmitted or something, and there is still something that has not been mastered, so what is going on?

Because that's the question I just talked about

Hit it with a low shot.

The white ball swirls forward on the tablecloth of the table

The white ball does not have a strong whirlwind.

Wait until the white ball hits the target ball.

There is no more whirlwind.

Therefore, it is easy to have a fixed rod.

And then the scaffolding has to be low? It's better to be a little higher.

The low scaffolding can penetrate farther.

If you're holding your hands high.

Then the angle between the club and the table is relatively large.

Then there is no penetration distance for the club (it is easy to poke the tip of the gun into the table).

It's very simple, and it won't exert force.

There are three parts of the ball.

Forearm wrist. If you don't know how to use your fingers, you won't be able to use a variety of rods easily.

One force affects the point of impact.

Be sure to find an experienced master to help you modify the wrist of the rod.

Changes in the fingers.

If you want to reach the cue ball hitting the target, the ball travels in the opposite direction of the force, so you need to hit it with a low club.

The low stick of billiard ball is to hit the middle and lower part of the cue ball, causing the cue ball to rotate backwards, and realize the effect of the cue ball reversing after touching the target ball.

The low bar is one of the basic strokes, so you can practice it often when you need to practice the basics.

First of all, the basic skills are gradual, so it is recommended to master the basic rhythm of the pole, the way of exerting power and certain basic skills before practicing the low game.

Secondly, the power of the low rod is not a dead force, but a relatively feminine force.

Therefore, when hitting the low club, the club should be as flat as possible, the force should be transparent and fast, the shot should be stable, and the point of hitting the cue ball should be accurate. At the same time, the outgoing club should be extended, in fact, the low club does not need to be strong in many cases, relying on the weight and extension of the club itself can achieve good results, especially the nine clubs. Therefore, penetrating force is important.

Another important point is that when the low rod is low, you must rub more powder, especially the edge of the leather head, these are the places to remove the ball, and rubbing more powder will increase the friction and reduce the possibility of the slide bar.

Finally, billiards belongs to journeymen after all, so it is still necessary to practice diligently. Fundamentals are particularly important.

It has to do with your shot, because your stance is not fixed, and when you hit the cue ball, the moment you hit the cue ball changes, and the point you hit is not the point you want to hit, so you play a different effect. Hitting the low bar is the same as hitting the deviating rod, you have to play a strong spin, you don't have to hit it hard, you can also play a strong rotation with a small force, when you hit the low club, the action of the rod and the pull rod should be coordinated, don't twist, you can start with the rod first, because the shot is equal to the rod.

Buddy is a novice, billiards low to hit the middle and lower part of the white ball or lower, the club to extend out to eat the white ball thoroughly Practice more.

The middle and lower part of the very large cue ball will have a backward effect. However, it is necessary to practice the stability of the shot. The key point is to exert force smoothly and make accurate dots.

Yes, haven't you heard of the low rod commonly known as the shrink rod.

Generally speaking, cue balls are divided into nine zones, and the shots in each zone are named separately:

The middle stroke, which hits the middle of the ball, can completely transmit energy to the target ball, while the cue ball is stationary, commonly known as the fixed club.

The high club, hitting the upper part of the ball, can completely transmit energy to the target ball, the cue ball first rests, and then rotates to run forward, commonly known as the heel club.

The low club, hitting the lower part of the ball, can completely transmit the energy to the target ball, the cue ball first rests, and then rotates backwards, commonly known as shrinking the rod.

The left deflection stroke, hitting the left side of the cue ball, has an arc of ).

The right deflection stroke, hitting the right side of the cue ball, has an arc of (.

The right low stroke, the right side of the cue ball is downward, and the running track appears first ( After hitting the ball, the low shot is played.

With a low left shot, hit the left side of the cue ball down, similar to the situation above.

The right high pole hits the right side of the cue ball up, similar to the situation above.

Left high pole, hit the left side of the cue ball up, similar to the situation above.

That's all for the basics, but of course there are advanced strokes, such as jumping poles and tie poles.

The key to jumping is to aim at the center of the ball, and generally hit the middle and upper part of the ball (you can also hit the middle and lower part) to exert force, and quickly draw the club.

The key to tying a rod is to master the principle of parallel lines.

The high rod, simply put, is to hit the upper hemisphere part of the cue ball with the cue stick, after hitting because the cue ball is rotating forward to move forward, after the collision, the cue ball continues to roll forward due to inertia, this is the high rod, the function of the high rod is to make the cue ball and the ball to be hit after the collision continues to move forward;

The low rod is to hit the lower hemisphere part of the cue ball with the cue ball, and after hitting it, due to the interaction between the cue ball and the cue ball, the direction of movement of the cue ball and the sub-ball is opposite, which is the low club, and the effect is opposite to the high club;

The above is just a relatively standard high and low club, and there are many kinds of extension strokes, which can be combined with different strokes to produce the result of cue ball movement. It takes a lot of practical training to be able to use flexibly, and for beginners, even if the hitting parts are similar, the effect will be very different, and it has a lot to do with the force, and you need to train hard to really learn billiards.

The high rod is to hit the upper hemisphere part of the cue ball with the cue stick, after hitting because the cue ball is rotating forward to advance, after the collision, the cue ball continues to roll forward due to inertia, this is the high rod, the function of the high rod is to make the cue ball collide with the ball to continue to move forward;

The low rod is to hit the lower hemisphere part of the cue ball with the cue ball, and after hitting it, due to the interaction between the cue ball and the cue ball, the direction of movement of the cue ball and the sub-ball is opposite, which is the low club, and the effect is opposite to the high club;

To put it simply, a high game is when the cue ball hits the target ball and continues to move forward, while a low game is when the cue ball moves backwards (in the opposite direction) after hitting the target ball.

The high club is to hit the top and the ball is forward, and the low game is to hit the bottom and the ball is to go back.

First of all, we should pay attention to the technique, the first point is that the hand frame should be placed very flat and flat, close to the countertop, and the second point is that the back hand should also be placed very flat and flat

Don't shake your wrist deliberately when hitting, but send the club out naturally and rub more jock.

If you do it correctly, you won't need to use a lot of force to pull the rod

At the lower 4 7 of the center of the ball, the pole should be flat and the shot should be fast, so that the ball can be played well.

You can divide the normal visual surface of the white ball into nine zones, three each for the top, middle, and bottom. Normally, when we hit the ball, it is in the middle of the upper half of the white ball, and the direction of the white ball is the direction of force, and after it hits the ball, it spreads outward at an angle of about 90 degrees with the ball being hit (if the angle is small, then the white ball will move in the direction of the ball).If we want to hit the pull (i.e., the white ball does not go forward but backwards after it is hit), we must hit the bottom half of the white ball, and we must play fast, return quickly and with a little force (the greater the strength, the farther the retreat).

In this case, the white ball will not come back until it hits the batted ball (the same angle as above), but if the white ball is too far away from the batted ball, it will not hit the bat. If you want to hit the set (set the white ball in the position of the bat), then you must hit the middle position of the white ball (note: because the ball is round, resulting in a visual difference, I believe everyone thinks that the position we usually hit the ball is in the middle of the white ball, in fact, it is in the middle and upper position of the white ball, and the real middle position is in the lower part of our usual hitting position), and have strength (depending on the distance between the white ball and the ball, the farther apart the two balls, the greater the force required, If the two balls are too far apart and have an angle, they will not be able to hit the set).

If you hit the left half of the white ball (this is the left stopper), the white ball will rotate in a clockwise direction and move forward, and after hitting the target ball, it will deviate to the left in the normal direction. Vice versa. The more you hit the white ball, the more direction it spins.

When playing some special balls, pay attention to draw the rod back in time, and then hit the right point.

When you make a shot, you won't miss the shot if you look at the main ball.