How to fix the blue screen on a win10 computer

Generally speaking, there are four things that can cause the blue screen error.

1.Occurs after performing a Windows update.

2.Occurs after the hardware is installed.

3.Occurs after installing or updating software (including driver software applications).

4.Other factors (i.e., abnormalities not caused by the above).

First, the solution of the first three items is mainly to retrace to the previous normal situation.

If an exception occurs after a Windows update, the recent update will be removed.

If an exception occurs after installing the hardware, remove the hardware;

If there is an exception after installing or updating the software, remove or roll back the previous version of the software.

How to roll back the previous version of the driver via Device Manager.

1) Right-click (1) on [Start] and tap [Device Manager] (2).

2. Tap the triangle (3) next to the device type of [Display Adapter]. Right-click on [Intel(R) UHD Graphics 620] (4) and select [Properties] (5).

This step is based on the Intel graphics card driver as an example, please roll back the version according to the driver error you encounter.

3) Tap [Driver] (6) and tap [Rewind Driver] (7).

4) Select [Reason you want to roll back to a previously installed driver] (8) and tap [Yes] (9). The system will start rolling back the driver to the previous version.

2. If the blue screen error is caused by other factors, please refer to the following steps to eliminate it.

a.Front-end jobs.

Remove external devices, such as external hard drives, printers, memory cards, optical discs from optical drives, adapter cards from card readers, etc.

Update the BIOS to the latest version.

Perform a system update and driver update to the latest.

b.System Restore.

After the backup, perform a system restore.

The causes of blue screen tend to focus on incompatible hardware and drivers, problematic software, viruses, etc. Workaround:

1. The cause of the virus. Use PC Manager to disinfect the virus.

2. Reasons for memory. Use an eraser to wipe the gold finger of the memory module and wipe off the oxide layer to ensure that the memory module is installed and running normally.

3. The chassis is not clean. The CPU fan has too much dust to run normally, causing the CPU temperature to be too high, so use a brush or hair dryer to clean up the dust on the inner wall of the case, the CPU fan, the graphics card fan, and the motherboard.

win10 system blue screen **critical process died solution.

1、win10 termination**critical process died in two situations,If it is a blue screen on direct boot,This needs to be reinstalled with a USB flash drive boot PE。

2. Try to boot and hold shift+F8, if you can enter safe mode, select Device Manager, disable the graphics card or uninstall the graphics card driver in the context menu, and the recently installed third-party software.

3. Press "win+r", enter msconfig, click the "Services" tab, select "Hide all Microsoft services", and then click Disable All.

4. Click the "Startup" tab, click "Open Task Manager", then disable all startup items and OK, restart the device, when the "System Configuration Utility" pops up, choose not to display this message again and click OK.

There are many reasons for the blue screen restart of the computer, and it is recommended that you follow the following methods to troubleshoot them one by one:

1.Remove newly installed hardware devices, such as external cameras, printers, and memory including upgrades;

2.Try to enter safe mode, uninstall the previously installed software, and check and kill viruses.

3.In order to fully rule out the possibility of software or system problems, you can back up the hard drive data and reinstall the operating system;

4.If blue screens continue to occur frequently after reinstalling the system, it is recommended that the machine be sent to a local service center for further testing.

1. Boot up to enter the computer automatic repair interface, and click "Advanced Options" here

2. After entering the advanced options, select "Troubleshoot".

3. Then select "Reset this PC" in the following interface

4. Because the original win10 system has been broken, choose to delete all the content in this step.

5. Select "Only drives with Windows installed".

After that, your computer will be reset normally, similar to reinstalling the system, which is more time-consuming, and waiting for the reset to complete, your computer can start normally.