How do you remove rust from a well? How to remove rust from underground well water?

Groundwater is still the main domestic water for residents in northern China, such as in rural areas, drilling wells to take water is groundwater, but this method is not good, the well water is very prone to the phenomenon of yellowing, so what are the ways to solve the problem of yellow rust in the well?

Next, please introduce Junhao environmental protection.

1. The reason for the yellowing of the well water.

If the well water becomes turbid in the well, then it is likely that the sediment content in the well is too high, if the well water is clear, after a period of time, the water becomes turbid, which means that the iron and manganese content in the water is too high.

2. The solution to the yellow rust in the well.

With iron and manganese removal equipment. Iron and manganese removal equipment is a water treatment equipment specially designed to treat iron and manganese ions in water, through a jet air pump.

or compressed air to aflame the water absorption.

The iron removal treatment process reacts with the manganese sand in the tank to filter the impurities, bacteria, and iron and manganese ions in the water, and finally produces water that meets the national drinking water standards.

The rust in the well is usually dissolved into the water after there is no metal rust in the water, and some water treatment agent polyaluminum chloride can be added, and the rust can be precipitated, and the well water will become clear.

It should be called scale, which is the white sediment after the well water is boiled.

The main component of limescale is calcium carbonate, with a small amount of magnesium carbonate.

It can be removed by heat, but it will adhere to the surface of the object.

A small amount of chlorine can be introduced to prevent limescale from forming.

Rust is scale. Soap is easy to form "tofu residue" in well water, spring water, and seawater. After boiling the kettle for a long time, a thick layer of scale will grow on the inner wall. These phenomena indicate that there are indeed impurities in the seemingly clear water.

The method of reducing the hardness of water to prevent water rust is ion exchange resin. There are two types of ion exchange resins, one is used to reduce the hardness of water to soft water, used for cleaning, bathing, etc., such ion exchange resins are called sodium ion exchange resins. The second type is a hydrogen ion exchange resin that is used to reduce the hardness of water in an appropriate amount so that rust will no longer form after boiling drinking water, which is specially used for drinking water treatment.

1) Sodium ion resin such as cleaning and bathing reacts with calcium and magnesium ions in the water, quickly exchanges sodium ions into the water and adsorbs the calcium and magnesium ions in the water, thereby completely softening the hard water and turning it into water without calcium and magnesium ions. It is suitable for washing clothes, bathing, etc. The product that uses this type of resin is a water softener or a water softener.

2) Drinking hydrogen ion exchange resin reacts with some calcium and magnesium ions in the water, reducing the hardness appropriately, and retaining the appropriate amount of calcium and magnesium ions in the water at the same time, so that there will be no rust left in the boiled water. Products that use such resins, such as water purification equipment for infants and young children, baby water love water, special water filter pots for infants, etc.

1. First of all, add an appropriate amount of salt to the kettle of the usual boiling water.

2. Then pour the drinking well water into the kettle and dilute the salt to dissolve.

3. Next, put the kettle on the stove and heat it to boil the water.

4. After the water boils, pour out the pot of water first, and do not drink it.

5. Next, pour the drinking well water into the kettle again, and then boil the kettle without rust.

6. Finally, after the pot of well water is boiled, it can be drunk directly, and there will be no more rust.

Generally speaking, this method was used by the military to disinfect water in the field, except for spring water and well water (deep underground wells), which were directly drinkable.

2 If there are no water purification tablets, they should be left for a longer time, 20-30 minutes later, you can drink or set aside.

3 Utilization of chlorite, i.e. bleach.

It can also play a role in disinfection.

It's just that there is some bleach in the water, so be careful not to drink the precipitated turbidity together.

4 If none of the above antiseptic medicines are available, you should have vinegar for picnics with you.

If there is rust in the well water, salt can be added to remove it, and the specific operation steps are as follows:

1. Add table salt to the kettle of boiling water.

2. Then pour the drinking well water into the pot and dilute the salt.

3. Put the kettle on the induction cooker and heat the water to a boil.

4. After the water boils, pour out the pot of water first, and do not drink it.

5. Re-pour the drinking well water, and there will be no rust after the kettle is boiled.

6. The last pot of well water can be drunk directly after boiling, so that there will be no rust.

Underground wells can be coated with anti-rust paint.

What chemical raw materials can be put to remove the rusty smell of well water.

The commonly used filtration method in our hometown: drape cloth at the bottom of the large water tank, put charcoal on the cloth, and the charcoal is fine sand, and the fine sand is stone. Who goes out by the water pipe that goes up under the cloth.

If you just want to get rid of the taste. Then just make the charcoal small and put it in the water, and that's it. However, it is better to use activated carbon, which can be separated with a cloth. Or wrap it up, but try to keep it in contact with the water.

It can be filtered by precipitating with a cylinder and filtering paper.

Dear, I'm glad to answer for you: The treatment method for rusty water in the well water is as follows: Method 1:

We can place gravel and carbon at the bottom of the well, so that the impurities in the well water can play a certain role in precipitation and filtration, and the user should carefully understand the comprehensive situation of the well. Method 2: If there is a pollution source around the well, we need to remove the pollution source or choose another place away from the pollution source to dig the well, if there are no other harmful factors, we need to continue to clean the bottom of the well regularly and replace it with new sand and carbon, when using well water, we need to pump the well water into the bucket, and let it stand for a certain period of time to take the supernatant in the barrel after the impurities settle.

Method 3: We can also put a small amount of coagulation precipitant to form flocculent sediment in the well water to achieve the purpose of water purification, but in order to ensure the safety of the well water quality, it is recommended to send the water quality to the inspection department for testing and then drinking. The above is the specific solution of how to make the water yellow of the well, in general, it is relatively simple and easy to use, I believe that everyone can quickly learn how to operate through the introduction and understanding of the above content, and can quickly make the water of the well clear.

Dear, I am very happy to answer for you, how to deal with the rust smell of well water, A: Choose to wash the well to remove the pollutants in the well, so that the well water is clean. The method of washing the well is to pump out all the groundwater through the pump, and when you know that the water cannot be pumped out, the pollutants in the water will disappear with the water.

By the time the well comes back out, the water will be clean. In addition, there is a shortage of water in the well, so it is recommended to boil it before drinking.

Summary. 3. Add baking soda to the kettle. Pour a small amount of baking soda into the kettle and bring to a boil for a few minutes before the limescale is removed.

Hello dear. The rust in the well is usually dissolved into the water after the metal is rusty in the water chaos, and some water treatment agent polyaluminum chloride can be added, and the rust can be precipitated, and the well water will become clear.

The next year old will introduce you to how to remove scale? 1. Add vinegar to the pot with scale. Vinegar is almost indispensable in the family, vinegar contains acetic acid, we can pour vinegar into the pot, heat it over low heat, and the scale is easy to remove.

Calcium carbonate will undergo a chemical reaction when it encounters acetic acid, and calcium acetate, carbon dioxide, and water will be formed after the reaction, of which calcium acetate is easily soluble in water.

2. Add lemon juice to the base cavity key of the pot with scale. Lemon juice contains citric acid, and the principle of lemon juice is the same as that of acetic acid, and the lemon juice can be easily removed by soaking it for a day and night after heating. Round matching.

3. Add baking soda to the kettle. Pour a small amount of baking soda into the kettle and bring to a boil for a few minutes before the limescale is removed.

Hope it helps.

Can you praise me dear? Thanks

Dear, I am glad to answer for you the method of removing rust in the well as follows:1If there is rusty water in the well water, a water quality monitoring report should be taken first, and the water quality monitoring report will show the metal ion content exceeding the standard; 2.

If the content of magnesium skin ions and calcium ions in the well water exceeds the standard, it means that the water hardness is too high, and the softened water equipment produced by Junhao Environmental Protection Group can be used for treatment. 3.If the iron and manganese ions in the well water exceed the standard, you can use the iron and manganese removal filter produced by Junhao Environmental Protection Group.

4.There is also a situation when the fluoride ions in the well water exceed the standard, you can use the fluoride removal filter produced by Junhao Environmental Protection Group.

Summary. Dear, hello, how to deal with rust in the well: first go find a few magnets, (some of the old broadcast speakers or old speakers) tie them with ropes, put them into the underground well water, or use your spare time to hold the rope and let the magnet slowly move up and down, left and right, so that the rust can be slowly eliminated.

Dear, hello, the treatment method of rust in the well: first go to find a few magnets, (hidden in the old broadcast speakers or old speakers) Qizhi tie it with a rope and put it into the underground well water, or you can use your spare time to hold the rope and let the magnet slowly move up and down, left and right, so as to slowly eliminate the rust. Xiang Hall.

Rust is a chemical reaction that rusts when iron is left unused for a long time. Iron is easy to rust, in addition to leakage resistance due to its chemical activity, it also has a lot to do with the external conditions in the spring. Moisture is one of the substances that makes iron rust easily.

However, only water does not rust iron, and only when oxygen in the air is dissolved in water, the oxygen reacts with iron in an environment with water reflux, and iron oxide is formed, which is rust.