What can cartons be made by hand?

You can make a big house with a cardboard box, and the production method is as follows:

Prepare materials: cardboard boxes.

1. Prepare a large box.

2. Make a door with an arc. Start by drawing the outline with a ruler and pen, and then cut it little by little with a carving knife. I don't choose scissors because scissors cut out this thick paper shell will not be smooth and untidy. (If you don't have a bread knife, you can use a large carving knife, which is absolutely straight and not rough).

3. The next step is to carve windows. This is one of the windows, and because it is going to hang curtains, a rectangular hole was dug directly.

4. Excavate another window. It is made in a form that can be pushed open and closed.

5. Then tidy up the roof, in order to transmit light and ventilation, so it is made into a trapezoidal shape and fixed with tape.

6. After the cottage is formed, the next step is to "decorate", paste the "wallpaper" inside, and pay attention to smoothness when pasting.

7. Stick the front first. As shown in the figure below, the arc part is processed, cut in small sections, and the arc is pasted piece by piece.

8. According to this method, paste the front and inside of the door, first the inside and then the outside.

9. After pasting, decorate the wall.

10. The doorknob is modified from a broken toy part.

11. Done.

What can be done with cartons simple by hand is as follows:Method 1. 1. Good tools, steel tape measure, ruler, cardboard, utility knife, pen.

2. Determine the size of the carton you want.

3. Let's start and draw the line on the cardboard.

4. Then cut off the cardboard along the edge.

5. This step should draw another line on the cutting line in the middle, because the cardboard has a certain thickness, and one should be cut outward, otherwise the box will be supported when the box is sealed.

6. Then use a utility knife to dig out the slotted place.

7. Then there is the indentation, and the indentation on the side should be downward.

8. Sealing. <>

Method two. 1.Use scissors to cut off the perimeter of the carton.

2.Take out the yellow paper and use a pencil to draw lines and cut according to the size of the box.

3.Take out the violet colored paper, and use a pencil to draw a line and cut it according to the size of the box again.

4.Glue the violet paper with a glue stick.

5.Paste the violet colored paper on the surface of the box.

6.Use scissors to cut off the edges of the excess cherry buries around the box.

7.Paste the yellow paper with a glue stick.

8.Attach the yellow colored paper to the surface of the box.

9.Take out the violet narrow strip of confetti.

10.Paste both sides of the colored paper with double-sided tape.

11.Remove the double-sided tape and bend the colored paper.

12.Glue the colored paper on both sides of the box as a handle.

13.It's done.

Hello, I'm glad that I answered this question for you Yo cartons can be made into a variety of handicrafts with high burning, as long as they are used, these waste cartons can be turned into useful things. For example, there are many children who like to play at home, and a lot of props will be used in the process of playing at home, at this time, in order to let children have more fun, they can directly use cardboard boxes to make children into a relatively simple house or castle, so that children can play Weihong's house when the experience is more real. Many children have toys bought directly from the mall, but if you use cardboard boxes to make toys such as cars or airplanes, many children will feel very novel.

For those boxes with a stiff texture, you can use them to make small tables or chairs for your child. You can also use the waste materials of cardboard boxes to make more abstract animals or plants in Qishanxu.

The method of making a computer stand in a cardboard box is as follows:Material preparation: waste cartons, cartons, rulers, paper cutters, hot glue guns, markers, nails, etc.

The operation is like fighting old jujubes:

1. Cut according to the drawings.

2. You need to prepare 6 such trapezoidal cardboards.

3. Draw the line according to the empty dismantling and cut out the groove.

<>6. Alternatively, you can also use a hot glue gun to fix it.

7. Wait for the glue of the previous step to dry before moving on to the next step.

8. Apply more glue reinforcement to the joints.

<>10. What it looks like from the back.

11. What it looks like from the side.

12. The appearance of the front.

13. Finally, add a long strip on the front.

14. A laptop stand with good heat dissipation performance is DIY completed.

How to do the carton manual method is as follows:

1.Carton handmade gift box: First, prepare a carton and fold the carton horizontally to make it a square; Second, draw four small squares on the four corners of the carton and cut them open; Then, fold the four corners of the carton to make it a three-dimensional gift box; Finally, draw the pattern you want on the gift box to complete a gift box.

2.Carton handmade lanterns: First, prepare a cardboard box and fold the carton horizontally so that it becomes a square; Second, draw four small squares on the four corners of the carton and cut them open; Then, fold the four corners of the carton to make it a three-dimensional lantern; Finally, draw the pattern you want on the lantern to complete a lantern.

3.Photo frames handmade from cartons: First, prepare a cardboard box and fold the carton horizontally to make it a square; secondly, four small squares were drawn on the four corners of the carton, and the elder Ling cut them open; Then, fold the four corners of the carton to make it a three-dimensional photo frame; Finally, draw the pattern you want on the frame to complete a frame.

4.Cartons handmade storage box: First, prepare a carton and fold the carton horizontally to make it a square; Second, draw four small squares on the four corners of the carton and cut them open; Then, fold the four corners of the carton to make it a three-dimensional storage box; Finally, draw the pattern you want to grow on the box to complete a storage box.

5.Cartons handmade gift bags: First, prepare a carton and fold the carton horizontally so that it becomes a square; Second, draw four small squares on the four corners of the carton and cut them open; Then, fold the four corners of the carton to make it a three-dimensional gift bag; Finally, complete a gift bag by drawing the pattern you want on the gift bag.

Waste cartons can be made of handicrafts such as cardboard boxes, cabinets, simple kennels, small houses, etc.

In today's era of environmental protection, resource conservation has become a consensus. There are many handicrafts that can be made with waste cartons, such as relatively simple cardboard box cabinets, simple dog kennels, and can also be made into a model of a small house for collection.

Prepare enough materials, draw design drawings, cut the carton and put it together, add a variety of beautiful small decorations, and fix it with glue.

Waste cartons manual practice:

1. The practice of carton cabinets:

Think about the specific size and size of the carton to be made, calculate the size on the paper, draw the specific outline with a ruler and marker, and cut out the outline with scissors.

First, cut out a rectangular cardboard box with a hollow middle, cut out three drawer-type cardboard boxes with scissors, glue tape or small cardboard on the outside as a handle, and put the finished drawers on top of the compartment to complete.

2. The practice of simple kennels:

Prepare a large enough cardboard box, cut off the excess part of the upper part of the carton, prick some breathable holes around, spread a layer of soft cushion in the middle, and the simple kennel is ready, it should be noted that the size of the box is adjusted according to the size of the dog.

3. The practice of small houses:

First draw the design drawings on the paper, the more detailed the drawings, the better, and then cut out all the walls and roofs of the house according to the design dimensions of the drawings. After cutting the opening, the details are processed, and the windows and doors are cut out of the cardboard, and the roof is cut out of the open windows.

Use glue and tape to glue the cut house pants together, and pay attention to the direction and length of the glue. Prepare a rectangular cardboard strip, cut the cardboard with scissors into small hollows, used to make fences, fence cutting is more troublesome, it is recommended to use utility knives more convenient.

Handmade with a cardboard box can be done as follows:

Seven-colored rainbow. Seven-colored rainbows, clouds like marshmallows.

It is one of the favorite handmade themes for children.

Use cardboard boxes to make different rainbow ornaments.

It is mainly through this to exercise children's color cognition and matching ability.

Prepare tools such as cardboard, paint, colored paper, carving knives, compasses, pencils, etc.

Cut the carton into a rectangular shape.

Use a compass to draw six or seven semicircles on the cardboard box.

Then use a paintbrush dipped in paint to paint the rainbow.

You can make a few more rainbows to match the same color.

Different degrees of yellow, blue, green, etc.

Use the progressive way to draw circles in the sedan chair.

You will feel the subtle differences between colors more intuitively.

Finally, cut out two cloud babies on the cardboard box.

Stick solid glue under the rainbow and you're good to go.

Wear string and hang it on the wall, window, or on the plants at home.

They are all very beautiful interior decorations.

2.Silly and cute penguins.

This season, people often think of animals that are quietly sailing.

That's right, it's a cute little penguin.

When spending time with your children.

Use a cardboard box to make a few little penguins together.

Enrich your child's childhood memories with these adorable animals.

First, cut out the appearance of a little penguin on a blank piece of paper.

And stick it on the carton and cut out a penguin of the same size.

The penguins are then painted with black and white paint.

If you want to make it more three-dimensional, you can make two identical penguins.

From the middle incision, assemble as shown.