How to remedy the bedroom switch installed outside the door

My bedroom is going to be wallcovering.

The bedroom door is opened from right to left, and the cabinet is to be made on the right side of the door, so the problem is, I don't want to enter the bedroom switch to the cabinet, there will be two schemes.

One: in the cabinet and door cover.

between leaving the position of the switch panel;

2: Install the switch panel into the bedroom outside the door; This is the case in two of the three bedrooms in my house. I would like to ask experienced experts, which of the two plans is better?

Personally, I think that the first plan, the blank position of the switch panel in the middle of the cabinet to the door sleeve will not be firmly pasted with wall cloth or other bad factors, but the second plan feels strange, and it is rare to see the switch in the bedroom outside the bedroom. So I've been struggling with what to do.

A good plan, between the door cover and the wardrobe paste the wall cloth, the general wall cloth will be pasted a few more centimeters into it, and the glutinous rice glue paste is also firm. My family's practice is to use woodworking board and gypsum board for carpentry on the side of the door sleeve.

The 10 cm fake wall, because the top is the first air conditioner, can not be built with red bricks, so that the switch panel is installed on the wall, it looks good, the wardrobe is embedded in the wall, and there is no need for the wardrobe to do the side panel to see the surface. My neighbor chose to install it in the direction of the door and against the wall, which felt a bit far away.

Generally speaking, the door is equipped with a switch, which is generally caused by some unreasonable structures of the bedroom itself, because no one wants to run outside the door to turn off the lights in winter; In addition, once you install a switch outside the bedroom, it is easy for people outside the bedroom to disturb your normal rest, and it is still the kind that you are not easy to control; In addition, the switch is installed outdoors, which can easily affect the energy-saving lamp.

of normal work.

You can drill holes in the switch box to the room, and then connect the line from the outside wire box to the indoor switch after installing the open box.

Bedroom doors cannot be opened outward. Occupy space such as aisles, balconies, etc. There is also a bobbin of the door frame or door sleeve, and the section is a high and low mouth, or called a tongue and a mouth, the purpose is to ensure that the vertical seam of the door leaf cannot be seen outside the room to ensure safety.

That's why the bedroom door is open. If it is opened, the gap between the door leaf and the door frame is exposed.

Nowadays, it is no longer a question of which way the door opens.

The key is that it is not safe to open outward, and this is the most important. Because when someone opens the door in the bedroom, if there happens to be someone outside the door, the door will hit that person if you don't pay attention. Therefore, for safety reasons, the doors are designed to open inward.

If you take a look at your door, the door frame or the bobbin of the door cover, the section has a high and low opening, or called a tongue and groove, the purpose is to ensure that the vertical seam of the door leaf is not visible on the outside of the room to ensure safety. That's why the bedroom door is open. If it is opened, the gap between the door leaf and the door frame is exposed to others, are you willing?

It is best to open inward, from the perspective of security, the lock of the door is generally controlled in the position inside, when the door is opened inward, the people inside are ready to come out when they take a step back to open the door, and the people outside want to go in and need to knock on the door and go in, without affecting each other. If the door is open to the outside, there will be a knock on the door outside, and a push will open the door inside, and the person outside will be hit with a "bang"! And some people are superstitious that it is not good to open feng shui to the outside and so on, and the leakage of wealth and qi.

Yes, but I feel that it will be more convenient to open the door in the bedroom, and it will not take up outside space.

If you change the inner opening to the outer opening, as long as the entire door frame is rotated 180 degrees, it is OK.

Yes, but it's not convenient. It invisibly occupies too much space in the living room or aisle, which brings inconvenience to walking.

<> use olecranon pliers or water pipe wrenches to clamp the door lock and turn it. When our bedroom door is locked, we can use olecranon pliers or water pipe wrenches, use olecranon pliers or water pipe wrenches to clamp the door lock, and rotate vigorously after clamping the door lock. Find the oblique tongue to slow down the mold liquid, and then use a screwdriver to bring up the oblique tongue, at this time you can't let go, you have to push it horizontally and then let go, and you can open the door after it springs back.