AISI assistant shows that there is no ID lock, why does the card have a signal but cannot be activat

There is a card, and then there is a signal, but if it can't be activated, it may be because there is a problem with your one device, you uninstall it, and you can reinstall it.

Hello, this situation is normal, because you plugged in the card and there is a signal, but the activation lock cannot be activated.

You need to go and register an ID

Then activate it to solve it.

The assistant shows that there is no ID lock, but the card also has a signal, but it can't be activated, it may be that your card lock is not plugged in.

The ID you said has a signal after inserting the card, but it can't be activated, which means that it can't read the content of your card, and you can update it again.

If you use AISI Assistant to show that there is no ID lock, if it cannot be used normally, it is recommended that you directly contact the official ** customer service staff of AISI, so that they can send relevant technicians to visit the door for testing and maintenance.

If there is no lock card, of course, it cannot be activated, and he does not have a security guarantee.

If the ITS speed test display is locked, you should find a professional to unlock it, because each ID has a different number.

Check if the phone is plugged into a SIM card: A SIM card is required to connect to the signal.

2. Check whether the mobile phone card slot or SIM card is damaged: you can insert other mobile phone cards to try, and then put the SIM card of the mobile phone itself on other mobile phones to see if there is a signal, if the card slot is damaged, it is recommended to replace the card slot, if the SIM card is damaged, please go to the business hall to replace the SIM card.

AISI Assistant shows that there is no ID lock, why does the card have a signal but cannot be activated? Because this software must have an ID before it can be activated.

The second assistant shows that there is no ID lock why the card has a signal, but it can't be activated, it is possible that you don't know his password, you should know his password to be able to activate.

Mobile phones are reliable, not parallel goods, and the advice to you is to go to the Apple store to flash the phone.

This phone can't be used without an AD password.

Because someone has registered an ID, you either ask someone for that if

It is estimated that this is a dirty machine, and it has been brushed, but you can't use it, and you have been deceived.

First of all, I will explain to you why your SIM card will not work. The iPhone you buy should be the American version, and this version can only use the SIM card of the American AT&T company, so it is also called the locked version. Don't worry, just modify the ** that locks the SIM card in the mobile phone, so that any SIM card can be used.

After you bought the phone, the person who sold the phone swiped the phone for you, and now you have updated the version, and the ** that locks the SIM card is back in your phone. Then the phone is naturally locked again.

If you think you're in trouble to crack, go to the place where you bought your phone, and he should give you a free re-swipe. If you want to crack it yourself, it's actually not that hard. Follow the method I've said below:

First of all, it is recommended that you flash the system to the latest version.

Then turn iTunes on (to make sure iTunes is the latest version), first let the iPhone enter DFU mode (press and hold Power+Home at the same time in the shutdown state for about 15 seconds, the iPhone will turn on to show the white apple, release Power at this time, keep pressing Home, so that you can enter DFU mode!) ）

Secondly, it is to connect the iPhone to the computer, and iTunes has shown the iPhone as a recovery state after the connection. At this point hold down the Shift key and tap Restore and select the iPhone firmware you just **. The next thing is to wait for the firmware to be installed.

Once installed, your phone is still locked. You need to "jailbreak" and then "unlock".

Once you have completed the steps above, the jailbreak is complete. Then come and unlock your iPhone. Do as you say

Just replace the card again.

A card is an ultra-thin chip that is layered on top of a SIM card. When the SIM card with the card installed is inserted into the iPhone, the iPhone begins to verify the IMSI, and the function of the card is to give him feedback to the IMSI of the original operator, so it can pass the verification, and then the mobile phone is registered to access the network. The role of the card is to provide the IMSI of the original carrier to pass the verification of the iPhone, and on the other hand, to register the available network with the information of the real SIM card.

The card acts as a disrupting part of the phone's verification process.

If your phone can't read the card or can't detect the SIM card, you can try to put the card on another mobile phone to try it, and determine whether it is a card problem or a mobile phone problem by changing the card and the phone.

If there is no card in the place where the card is inserted, it will be stuck inside.,This is the Japanese version with a locked version.,It's the same as China's Mobile Unicom.。

ID is yours why can't it be activated? The owner's ID is remotely locked, which proves that the ID is still the owner's, of course, you can't activate it.

Activate with iTunes. But if your device is locked by someone else using Find My iPhone. Then either give it back to someone else. Or it's bricks.

If you don't have an ID, insert the card and activate it at the Aisi assistant, and if you have an ID, you can't activate it directly, you need to enter the ID account.

Didn't turn off Find iPhone before flashing?

You need a SIM card to activate your phone, whether you use another assistant or not.

Here's how it works:

1.Go to Apple's new activation lock page via iCloud;

2.Enter the serial number of your iOS device and the verification code in the input box, and then click "Continue".

Device serial number query channel: Open Settings App - General - About This Machine - Serial Number.

With this simple step, you won't have to worry about buying an iPhone from the wrong source, or if it's accidentally stolen, if you have activated Activation Lock, it's useless for the other party to hold it. Of course, this tool also supports other iOS devices such as iPad, iPod, etc.