Do I need to add carbon deposition agent to the fuel tank for my private car? How often should it be

Effects of excessive carbon deposition in the combustion chamber:

1. The engine combustion chamber is the worst place in the working environment of the car, which is under high temperature and high pressure for a long time. Inevitably, carbon deposits also occur here, mainly from the pyrolysis of incompletely burned fuel. The carbon particles here are hard and pot-shaped, and in severe cases, they are honeycomb and have a certain thickness;

2. The carbon deposition here will affect the intake vortex, hinder the rate of flame propagation, and lead to a decrease in power, which will lead to engine knocking (commonly known as cylinder knocking), and even excessive pressure leading to combustion chamber breakdown;

3. Slight carbon deposition does not matter much, but carbon deposition in the combustion chamber is an accumulation process from slow to fast, so daily cleaning is very important.

4. It is difficult to start the vehicle in winter, and the engine shakes after starting, and even causes the engine not to start; There will be a lack of acceleration of the vehicle; Idle shaking of hot cars; the phenomenon of increased oil consumption; Every carbon deposit inside the engine will have a bad impact on the normal operation of the engine, and in severe cases, it will cause irreversible damage to the engine piston.

Generally, the commonly used methods are: dismantling and washing, hanging bottle cleaning, and fuel additives.

1. Dismantle and wash. This method is very direct and rude, but it is generally sent to the 4S store for disassembly, the disassembly of the engine is more complicated, no matter what parts will affect its performance more or less every time it is disassembled, you need to ask a professional master to disassemble. The carbon deposits in the engine can be seen directly when dismantled and washed, and the cleaning will be relatively clean.

However, the cost will be relatively high, and it will also require technology.

2. Hanging bottle cleaning.

This method is also relatively common, the hanging bottle is to discharge the cleaning agent into the air intake, dilute and soften the carbon deposit to turn it into a slurry, and then burn it from the cylinder to discharge. Generally, the cleaning objects include the intake tract, throttle, intake valve, fuel injector, cylinder inside, etc., but the effect is not as direct and obvious as dismantling and washing.

3. Fuel additives.

One of the causes of carbon deposition is that the fuel burns insufficiently, which adheres to various parts of the engine and forms carbon deposits over time. The main function of additives is to drill into the pores of carbon deposits with the help of strong surface activity, destroy their structure, and gradually dissolve these carbon particles from the metal surface, and then discharge them through exhaust gas after burning with fuel at high temperatures. Effective fuel additives such as PNF stock solution are not corrosive, can clean the whole oil circuit, fuel tank impurities, fuel tank moisture, high-pressure oil pump, built-in gasoline filter, fuel injector, piston top, intake valve, exhaust valve, will not clog ternary, and the safety is relatively high.

Effective cleaning can extend the life of your accessories.

The residue of substances in the fuel injector, throttle, oil pipeline, spark plug, cylinder head, inner wall and other parts caused by insufficient combustion of gasoline in the cylinder, and then the black gum produced by the repeated high temperature action of the engine is called carbon deposit.

One of the reasons for carbon deposition is that the fuel is not completely burned and adheres to various parts of the engine, which can form carbon deposits over time. The main function of additives is to drill into the pores of carbon deposits with strong surface activity, destroy their structure, and gradually dissolve these carbon particles from the metal surface, and then discharge them through the exhaust gas after burning with the fuel at high temperature.

The increase in carbon deposits in the car will lead to insufficient combustion of the engine, resulting in an increase in fuel consumption and a long time when the car failure light is on.

Ways to slow down the formation of carbon deposits:

1.Use high-quality fuel. Because the main components of carbon deposits are wax and colloidal deposition in the fuel, the lower the colloidal content in the fuel, the better. But we can't change the quality of the fuel, but we can choose not to add unidentified cheap fuel.

2.Avoid driving at low speeds for long periods of time. If necessary, the high speed can be pulled at a regular time. The principle of removing carbon deposits at a high speed is to speed up the airflow, which can carry away a small amount of carbon deposits that are not firmly attached. The combustion temperature is increased so that part of the carbon deposits in the cylinder are burned.

Carbon deposition hazards. If the carbon deposit is not cleaned for a long time, the operation of the whole vehicle will be caused, the internal channel of the engine will be blocked by carbon deposits, the engine power will become worse, and the occurrence of fuel consumption, abnormal engine noise, and unstable idle speed will occur, thereby reducing the power of the automobile engine, increasing fuel consumption, and causing the combustion rate to be too low. If you do not clean up the carbon deposit in time, it will not only cause a certain degree of harm to the car, but also the harm to the environment, modern society pays attention to energy conservation and emission reduction, and exhaust emissions must not exceed the standard, so we should pay attention to this problem.

Usually 5000 kilometers with effective PNF fuel additives to clean the overall oil circuit carbon deposits, a long time not to clean up the carbon deposits will cause the operation of the whole vehicle, so that the internal channel of the engine is blocked by carbon deposits, the internal fuel injection of the car is not smooth, so that the engine power becomes poor, thereby reducing the power of the car engine, increasing fuel consumption, and the combustion rate is too low.

In fact, no matter what vehicle as long as it travels to 5000 kilometers, it is necessary to add carbon deposition cleaning agent, every 5000 kilometers will be more appropriate, and the amount added each time should be judged according to the capacity of the fuel tank. The reason why it is necessary to add carbon deposition cleaning agent to the fuel tank is also to clean up the carbon deposits in the engine, and if it is a new car, there is no need to use cleaning agent. After the car reaches a certain mileage, you can choose to add a small amount of carbon deposition cleaning agent to the fuel tank, and if the mileage of the new car does not reach 5000 kilometers, there is no need to add it.

Now there are many types and brands of carbon deposition cleaning agents on the market, so we must choose the most suitable brand based on the actual situation of the car. <>

In the process of adding, it needs to be mixed with gasoline and burned, so that with the help of the activity of the surface of the cleaning agent, it can decompose and crush the sediment in the engine well, which can play a good cleaning effect. In the process of driving, if the engine can be cleaned, it can not only reduce fuel consumption, but also make the fuel in the car more sufficient, which can improve the overall power, and can also reduce exhaust emissions. <>

The reason why carbon deposition will be produced is directly related to the quality of gasoline and the habits of drivers, we must maintain good driving habits, but also choose gasoline with good quality, so as to effectively reduce the generation of carbon deposition, we must choose high-quality cleaning products, so as to prolong the service life of the engine. <>

In the process of adding carbon deposition cleaning agent, it is necessary to add it correctly according to the user's manual of the car, and the demand for cleaning agent for different models will also be different, and if it is added blindly, it will easily cause some adverse effects on the car. Therefore, be sure to read the manual before adding, and if the carbon deposits in the car are very serious, it is best to choose to go to the car repair shop to clean it up.

Private cars need to add carbon deposition cleaners to the fuel tank because private cars also produce carbon deposits. 5000-10000 km plus once is suitable.

I think it needs to be added, preferably once a month, so that it can effectively prevent carbon deposits.

Nothing ***.

Generally, cleaning agents are very corrosive. If it fails to burn in time, the car may be annihilated, and the oil search box and oil pump will have little damage, but this impact is not a big problem, so there is basically no ***. Thank you.

Invincible with carbon. Reference: 1. Add cleaning agent first, then add oil. Use the pressure of oil to impact the hand to mix more fully (Note: adding cleaning agent first and adding cleaning agent after only mixing fast and slow, and not as a mandatory requirement.) ）。

2. This product can be used for 28-65 liters of gasoline, 1 bottle per tank of oil, and 2 bottles for more than 65 liters.

3. In the case of less than 10 liters of fuel tank, add cleaning agent and drive to the gas station to refuel, individual vehicles may feel that the car acceleration is not good, this is because the concentration is too high, which changes the chemical composition of gasoline, but don't worry, it will not damage the vehicle, after filling up the gasoline, the symptoms will disappear; Individual key vehicles may have a fault code on the dashboard, don't worry, after the tank of fuel is used up, the fault code still exists, you can go to the 4S shop or repair shop computer to clear the code.

It is recommended to use according to the actual situation of the vehicle: Please use 1 bottle for vehicles driving less than 20,000 kilometers. For vehicles traveling 2-80,000 kilometers, please use 2 bottles.

For vehicles traveling more than 8-150,000 km, please use 3-4 bottles in a row. For vehicles traveling more than 15-200,000 km, please use 4-5 bottles in a row. For vehicles with faulty phenomena (increased fuel consumption, weak acceleration, unstable idling, difficult cold start, choking exhaust, etc.), the first time to use the Loopa Carbon Invincible, I recommend:

For faulty vehicles, the number should be doubled for the first use. How to achieve the best results: After adding the Robe Carbon Invincible, keep the vehicle at a speed of more than 80 kilometers per hour, and if you continue to drive more than 100 kilometers, you will feel a significant increase in the power of the vehicle, and the faulty vehicle will almost always have a noticeable feeling when driving about 200 kilometers.

For example, the throttle becomes lighter, the power is increased, etc. Advantages of the product:

You only need to add the Loopica Carbon Invincible to the fuel tank to complete the cleaning work automatically, without disassembling the engine, without damaging parts, saving waiting time; Starting from the fuel tank, it can clean multiple parts such as fuel injectors, intake valves, combustion chambers, and three-way catalytic converters at the same time, replacing a number of cleaning carbon deposition services, saving a lot of maintenance costs; Decomposing carbon deposits is more thorough, safer, and prolongs the service life of the vehicle than dissolving carbon deposits.

The carbon deposits in the intake valve are actually the glue carbon left over from the combustion of gasoline. Because the rubber carbon has the characteristics of absorbing gasoline, this layer of carbon will absorb gasoline, and the more it is wrapped, so that the vicious circle leads to the intake valve can not be closed, the engine power becomes poor, and a series of failures such as difficulty in cold car start.

Carbon deposits in the combustion chamber can accumulate in the combustion chamber or on the three-way catalytic converter. If the combustion chamber has a strong carbon deposit, it will cause the spark plug to ignite, and the cylinder pressure will rise, injuring the internal parts of the engine, and causing a sound similar to knocking on the cylinder block, which is called a burst. Experienced car owners can judge the carbon deposition in the combustion chamber by observing the spark plug ignition and thermal power extreme.

When the carbon deposits in the combustion chamber are cleaned, the exhaust emission detection will be as easy as a new car, and it will be very easy to meet the standard.

We know the above two reasons for the formation of carbon deposits, and finally let's talk about the solution.

First of all, for the carbon deposition cleaning of the intake valve, the bottle is generally slinged. This method is simple and effective, and it is recommended to wash it every 5,000 kilometers.

For the cleaning of the three-way catalytic converter, the cleaning effect of the hanging bottle is poor. We generally use a special water-based ternary cleaning agent with special equipment to clean and reduce the three-way catalytic converter (it is recommended to clean it every 20,000 kilometers). There are some informal maintenance shops that will covet convenience and directly soak the three-way catalytic converter with oxalic acid, so that the strong acidic liquid will corrode the inside of the catalytic converter, and you must pay attention to it.

The addition of carbon deposition additives to the fuel tank should have a long-term effect, not an immediate requirement of how many kilometers must be run at a time. The role of this additive is the effect of slow-release cleaning, so it is generally necessary to run one or two tanks of oil to have a more obvious effect.

The decarbonizer added to the fuel tank should have a long-term effect, eliminating the need to travel several kilometers at a time. The effect of this additive is to slow down the cleaning process, so it is often necessary to run one or two tanks to produce a more noticeable effect.

Adding decarburizing additives to the fuel tank should be long-term and do not require that many kilometers to run each time. The effect of this additive is a slow-release clean, so it is usually necessary to run one or two tanks to produce a more noticeable effect.

Carbon removal additives added to the fuel tank must have a long-term effect and do not require a run of several kilometers at a time. The effect of this additive is to delay cleaning, so it is often necessary to run one or two tanks to produce a more noticeable effect.

How many kilometers does the car add carbon deposition cleaner|? It's the automotive industry, your car. You have to go to the automotive industry. Ask.

1. How to use carbon deposition cleaning agent: Shake the liquid in the tank thoroughly. Spray the product 15 cm away from the stain, leave it on for a few minutes, then wipe with a rag.

Use a cleaning scraper to remove stubborn stains, such as tape, from the glass. If there are stubborn stains on the body, gently remove them with a cleaning spatula. Detergent formulation, components:

Silane ketone emulsion: 10% alkyl benzyl ammonium oxide: 18% alkylphenol ethoxylate:

25% water:47%2 How to add carbon deposition cleaner to the formulation advantage: The car cleaner formula contains anionic surfactants (alkyl benzyl ammonium oxide), nonionic surfactants (alkylphenol ethoxylates) and brighteners (silane ketone emulsions).

After mixing the above components in the above proportions, the purpose of decontamination, polishing and paint protection of the vehicle surface can be achieved. The preparation of anhydrous cleaning agent is very simple and easy to use. After spraying the cleaning agent on the surface of the vehicle, it can be wiped clean with a cloth, saving you the trouble of rinsing with a lot of water.

It can be used outdoors at any time, anywhere, without restrictions.