How to solve the problem of anti air splashing in the toilet on the second floor?

The smell of the drain in your toilet flushing up all day long indicates that the downstairs section of the main sewer pipe of the building where you live is not draining smoothly and is blocked by foreign objects. Because all the water outlets such as urinals, washbasins, washing machines, baths, etc. in your home and the upstairs residents lead to the main sewer pipe, these effluents flow to the main sewer pipes with poor drainage, and its foreign matter blocking force exceeds the covering force of your home water trap. It is recommended that you use alkali first.

Flush the toilet several times with boiling water and eat alkali.

It has a good corrosive effect on foreign bodies and has a quick effect on dredging pipelines; The second is that the former method does not work, and sulfuric acid can be filled into the toilet to make it flow to the foreign body to block it, and the corrupt foreign matter can be unblocked; Third, if it still doesn't work, it means that there is a hard foreign body blocking, you should ask the master who dredges the pipe to deal with it, not to dredge the pipe of your house, but to dredge the main sewer pipe from your house to the downstairs.

In order to completely solve the problem of anti-air splashing in the toilet on the 2nd floor, it is necessary to clean up the fecal sewage in the septic tank, and Yu Ji in the sewer is eliminated, and the problem of anti-air splashing in the toilet on the 2nd floor is fundamentally solved.

If the toilet on the second floor splashes water, it means that the sealing gasket of your toilet is not sealed properly, and this situation will occur when the air leaks. It would be nice to give him a new gasket.

All the effluents such as the unblocked and bathing are leading to the main sewer pipe, which is effective for dredging the pipes and washbasins.

Depending on your situation; Third, if it doesn't work, it means that there is a hard foreign body block, washing machine, it should be a blockage downstairs, flush the toilet several times with boiling water, not to dredge the pipes of your home, these effluents flow to the main sewer pipe with poor drainage, and its foreign body blocking force exceeds the covering force of your home water trap, and there are foreign body blocks.

It is recommended that you use edible alkali, which will be connected to the nearest drainage of the main sewer pipe in your home to backwater or gas, edible alkali has a good corrosive effect on foreign bodies, that is, a stream of peculiar smell rushes up, indicating that the downstairs section of the main sewer pipe of the building where you live is not well drained, and you can fill the toilet with sulfuric acid, when there is sewage discharge, you must ask the master who dredges the pipe to deal with it, but dredge the main sewer pipe from your home to the downstairs section of the sewer pipe of your toilet flushes up all day long and the smell is up; The second is that the former method does not work. Because of the urinals of your home and the upstairs residents, it is blocked by foreign objects.

Putting balsamic vinegar or sun-dried tea leaves in the toilet can eliminate odors. Apply white vinegar to the surface of the toilet bowl and wait for some time to eliminate the smell.

If you change the toilet bowl of ***, the curved pipe under the toilet will not be reversed, and the water tank will not splash if you install ***.

How to solve the waterproof and anti-gas of the toilet on the second floor Chen owes water as a solution to the toilet on the second floor If you go back to Jianshui, I think it should be possible to install a water-stop valve on this street, so that you can prevent anti-gas and cheap water.

When the toilet installation process is basically completed, in order to ensure that it can be used normally, it needs to be inspected and accepted. However, in the process of testing, we must pay attention to the water inlet of the toilet water valve to see how smooth the water inlet is, whether there will be water leakage in the water tank, whether it is smooth when flushing, and so on.

This was a major design problem at the time, if possible to connect an additional snorkel.

I think toilet anti-device water is not something we ordinary people can do, you should still find this kind of professional person, sewer person to show you the water.

What is the problem in the end, as soon as the upper floors flush the water, they heard the sound of gurgling and bubbling and splashing water, which was very depressing. : Have you encountered similar problems, help analyze.

If the trachea is not blocked, it is because the weather temperature is high, and the septic tank produces gas, and the air pressure goes up and discharges from the nearest outlet.

It is recommended that you use edible alkali and flush the toilet several times with boiling water, edible alkali has a good corrosive effect on foreign bodies, and it has a quick effect on dredging pipes; The second is that the former method does not work, and sulfuric acid can be filled into the toilet to make it flow to the foreign body to block it, and the corrupt foreign matter can be unblocked; Third, if it still doesn't work, it means that there is a hard foreign body blocking, you should ask the master who dredges the pipe to deal with it, not to dredge the pipe of your house, but to dredge the main sewer pipe from your house to the downstairs.

The principle of toilet flushing is to use the power of the height difference head to flush, the drain pipe of the toilet has a reverse bend, which is used to seal the smell, the power of the head is weakened, and the tail water is left at the back bend There will be more water.

I'd like to know how this is going on, and I'm waiting for someone else.

If the pipe is not blocked, it is because the weather temperature is high, and the septic tank produces gas, and the air pressure goes up and discharges from the nearest outlet.

Help: On the second floor, the toilet is gurgling and splashing, what's going on and how to solve it?

Kiss! Hello, happy to answer your <>

The following reasons may be caused by the blockage of the bottom of the toilet, because during use, its water outlet will sometimes be blocked by paper towels, so that the water speed will decrease, resulting in the phenomenon of anti-gas gurgling when flushing. For high-rise buildings, if only the sewage pipe is installed when the toilet is installed, and the exhaust pipe is not installed, then the reverse gas gurgling will occur when draining. If the bottom of the toilet drain is clogged, then when flushing, the air inside will rise upwards and make a gurgling sound.

The method is as follows: 1. Use a knife to cut the glass glue around the original toilet and remove it to the toilet. 2. Remove the flange of the original toilet bowl and shovel the ground to remove dirt.

3. Replace the original flange with the newly purchased flange with non-return, and coat the toilet bowl with glass glue around it after restoration. There are three reasons for splashing water: 1. The main drainage pipe of the toilet under your house is blocked, and the drainage is not smooth.

2. If your home is on the first floor, and it has been like this for a long time, it is likely that the septic tank design is not reasonable. 3. I hope I can help you <> the toilet reason

Do you have any other questions?

Generally speaking, this situation occurs because there is a problem with the angle of the water flow, if you want to solve it once and for all, the first thing you have to solve is the flow problem, I estimate that it is very likely that the hole in the toilet bowl has water, and the inside is partially blocked, so the water flow direction changes.

If you want to solve the problem that the toilet will splash when it is flushed, then when you flush, close the lid of the toilet so that it will not splash outside. This is the easiest and most practical way to do it.

If the flushing toilet is flushed, it will splash some water outward, this is a problem in the design of the toilet, if you want to solve it, replace it with a new toilet, I think the problem should be solved.

If you want to solve the problem of splashing water when the toilet is flushed, it is to reduce the float of the water tank to reduce the water inlet and reduce the pressure, so that you will not splash water outside.

When flushing the toilet, the water in the toilet should be built outside, the normal toilet will not be seen outside, you may be the toilet, the normal toilet will not be seen outside, you may be the toilet and the amount of water is too large, you can try to ask the master to adjust the amount of water in your toilet!

Lower the water pressure, if the water pressure is high, it will splash outward, and if it is high, it will fog up.

Well, I can tell you a way of mine. When you go to the toilet, you can put a layer of tissue in the toilet. That way, when you flush, he won't splash out.

It is necessary to change the toilet with a new one, because there is no way to solve such a problem, and only a new toilet can be completely solved.

If the toilet leaks when flushing, it also means that its water flow is blocked and the water is uneven.

However, your toilet will splash out when it is flushed, and you can close the lid when you flush it again so that it will not flush out.

How to solve the problem that the outer diameter of the toilet flush may be that you set the water content of the flush to be larger, so he will reduce the water inlet outward, and the water flow rate of his flush will be good.

When flushing, close the toilet lid first and then flush the water.

It is possible to install a drain check valve and change it to an independent drain. The first floor is usually a separate water pipe, so a check valve needs to be installed on the second floor. A check valve is a one-way valve body that prevents water from backing up and does not affect the discharge or clog the main pipe.

Check valves are automatic valves, which are mainly used as pipelines for one-way flow of medium, and only allow the medium to flow in one direction to avoid accidents. If there is backwater in the pipeline, the check valve disc will automatically close, so the backwater problem is solved.

The toilet on the 2nd floor will be flushed upwards. In the case of a separate drain on the first floor, the second floor is the lowest point of the entire floor of the pipes, and if you throw things into the sewer from the upper floor, or if the old pipes are heavily oiled, the pipes will be blocked. If the sewage is not discharged, it may flow back from the second floor, which is closest to the outlet.

The problem of rebate on the second floor does exist, but the problem of new houses is not big, and it is not recommended to buy old houses.

The solution to the toilet backwater

A check valve can be installed, and it will not affect the toilet water and sewer water in daily life. Because the floors above the second floor are basically shared sewers, the sewers are relatively congested, and check valves can effectively solve this problem. If you live on the second floor, it is very necessary for you to have a check valve in the toilet.

It could be that there is a blockage in the drain main.

Because it shares a main sewer pipe with the upstairs residents, if there is a blockage when the upstairs residents use water more frequently, then this blockage will cause the pressure of the second floor pipe to drop and backwater. It could also be that the water is not strong enough. Generally, the commercial housing uses gravity self-flow drainage, and the drainage speed of the drainage riser is generally greater than that of the drainage horizontal pipe.

Therefore, when the hydraulic conditions are not good enough, the hydraulic power of the drainage branch pipe is less than the hydraulic power of the drainage riser, then the water of the drainage riser will overturn the water, and the sewer backwater will be formed in the drainage branch pipe.

<> "After the toilet has been used for a long time, it is inevitable that there will be some abnormalities, such as: anti-gas, water leakage, etc., so what should I do if the toilet on the second floor is anti-air splashing? Let's learn together.

What to do if the toilet on the first and second floors is splashed?

First find out the cause of the toilet anti-air splash on the second floor, and then take a suitable solution according to the actual situation, there are many reasons for the anti-air splashing of the toilet on the second floor, the reasons are different, and the solutions taken will be different, as follows:

1. If the toilet on the second floor is splashed because the imitation plum sewer of the toilet on the second floor is blocked by foreign objects, you can use caustic soda and water to dredge the blockage, and caustic soda can dissolve the blockage to achieve the purpose of dredging.

2. If the toilet on the second floor is splashed because the main drain pipe on the first floor is blocked by a foreign object, resulting in poor drainage of the drain pipe, you can ask professionals to take effective dredging measures to dredge the blocked position.

2. What are the precautions for the use of the toilet on the second floor?

1. When pressing the button of the toilet tank for flushing, be sure to cover the toilet lid, because when the toilet is flushed, the bacteria and microorganisms in the toilet will rush into the air along with the airflow flushed out of the cavity culture, and then fall on the surrounding bathing utensils, which will affect human health, and close the toilet lid can let it continue to stay in the toilet.

2. When cleaning the toilet, you must pay attention to the cleaning of the toilet seat. After the toilet seat is used for a long time, it is easy to accumulate dust, stains, and bacteria, and it is in direct contact with the human body, so it will have an impact on human health, therefore, it is recommended that you must regularly use disinfectant and other products to clean and disinfect it.

The above is a detailed introduction to what to do about the toilet on the second floor and what are the precautions for the use of the toilet on the second floor, I hope it can help friends in need.

The floor drain is anti-gas after the toilet flushing on the first floor! Hello, I am happy to answer for you<> The floor drain after flushing the toilet on the first floor is because the toilet sewer pipe is laid and the root of the floor drain is too close, and it is best to dredge the U-bend of the floor drain. Reduced air resistance 1

Use toilet cleaner as a dredging agent: pour an appropriate amount of toilet cleaner into the toilet every once in a while, close the toilet lid and let it sit for a while, and then rinse it with water to keep the toilet unobstructed. 2. How to block the overflow of floor drains:

Find a plastic bag that does not leak, fill it with an appropriate amount of water, remove the grate on the floor drain, and put the plastic containing water on the floor drain mouth. 3. Even if the indoor toilet is flushed cleanly, it will often leave a smell, as long as a small cup of balsamic vinegar is placed in the toilet, the smell will disappear. Swap and never once a week.

4. Dry the residual tea leaves and put them in the toilet or ditch to smoke them to eliminate the stench. Flush toilet gas may be caused by the lack of water in the trap, or too little water to seal all the drains, resulting in odors. Look downstream to see if your sewer vents are blocked (on the roof) or if someone pours a lot of water to create a vacuum that sucks the water out of your trap.

Have you not lived in your home for a long time or have not used the toilet for a long time, and the water in the trap has evaporated? Another is the quality of the toilet itself, the water storage is too small, and it is easy to leak. Hope mine can help you <>

Do you have any other questions?