How to solve the problem that the toilet at home is not draining?

When it comes to toilets, we are all familiar with them and use them every day, and after using the toilet, people need to use the water from the tank to flush it. The toilet has been used for a long time, and the flushing power of the toilet does not seem to be as powerful as it was at the beginning! When flushing, some toilets will have weak flushing and cannot be cleaned.

Many people feel that their toilet is clogged, so the flushing power of the toilet is weakened. What should I do if the toilet flush power is insufficient? What exactly causes it?

The following is an answer for you one by one.

First of all, we first need to understand the causes of poor toilet drainage! One possibility is that the water level of the inlet valve in the tank is too low, and the water is not going to go down. This removes the tabs from the inlet valve, and then turns the inlet valve counterclockwise to adjust its height.

Or putting the bottle in the tank will also increase the amount of water. Pipe aging leads to a thinner pipe diameter as a factor. The other is that the toilet is urinating more and more, the outlet is clogged, and the sewage may be slowed down.

If a foreign object falls into the toilet, the drain may be slower.

Method 1: Pour the Coke on the toilet, stay overnight, sweep it off the next day, and it's solved. The dirt on the toilet bowl is mainly urine alkali and beard machine.

Substances containing acid can neutralize part of the urine alkali and beard base, so the carbonic acid in the cola fully dissolves him, reduces the adsorption of dirt, and later rinses with clean water, and the dirt will disappear quickly. Method 2: Clean the toilet with a dredging agent

At intervals, pour an appropriate amount of toilet cleaning order into the toilet, close the toilet lid, let it sit for a while, and then rinse it with water to keep the toilet unblocked. The main ingredient of toilet cleaner is hydrochloric acid, which has trace amounts of surfactants, fragrances, moderators, accelerants and acids, which can clean stains on the toilet bowl and enhance water power.

The above is a summary of the reasons for the lack of power in the toilet, and the solutions, I hope it can help you.

You can change the toilet, you can also find a professional decorator for maintenance, or you can buy some dredging agents. Or change the inlet valve, so that the water will become powerful.

The toilet in the house is flushing, if it is boring, I think you can change to a new toilet, because this toilet is no longer useful, so it is better to change it.

Be sure to clean the toilet bowl in time, and then remove the water purification valve buckle in the water tank and adjust the height, so that it can be solved reasonably.

You can pour in some cola, and the two will have some reactions to solve the problem, you can also use toilet cleaner, or you can clean the toilet bowl in time.

It may be that the pump in the toilet bowl is malfunctioning and has no strength, so the pumping is not energetic, and it is very slow.

It may be because the water flow is not too fast, or it may be because the water pipe is too thin, you can go and replace the water pipe or change the pressure of the water.

It may be that the water pressure is too low or the toilet has been used for too long, resulting in a lack of power, which is a relatively common problem, so don't worry too much.

Reasons why the toilet flush is not strong.

1. There is a problem with the quality of the toilet itself, and many businesses will choose to cut corners in the process of making toilets, so some toilets are prone to problems after being used for a long time. Therefore, when buying a toilet, you must choose a well-known brand, so that you can be guaranteed in the process of use.

2. The side handle chain of the side press and side wrench toilet is long, which causes the water stop pad to stop the water quickly, although there is action.

3. The flushing strength and water pressure of the toilet itself are insufficient, resulting in the phenomenon of weak flushing when the toilet is flushed.

4. The ceramic glaze of the toilet bowl is not smooth enough, which is easy to hang dirt, and it will also cause the flushing to be unclean.

How to use the toilet properly

1. Develop the habit of closing the toilet lid when flushing

The correct operation of the toilet bowl is to develop the habit of closing the toilet lid when flushing, because when the toilet is flushing, the instantaneous cyclone in the toilet can carry germs or microorganisms to the air at a height of 6m, and it will drift in the air for several hours, so as to fall on the walls and daily necessities, which will breed bacteria.

2. The stolen goods should be cleaned up in time

The dirt in the toilet must be cleaned up in time, the toilet is easy to be contaminated with some urine stains, feces and other dirt, if after flushing, there is still a residue, you must use a toilet brush to clean the feeling in time, otherwise it is easy to form macular stains, which will breed mold and bacteria.

3. Choose a paper basket with a lid

There is often a paper basket next to the toilet, which is used to store the paper that has been used, if the paper basket is not cleaned frequently, it will breed bacteria for a long time, and the bacteria will then spread in the air, which will affect the air quality of the entire bathroom, so choose a paper basket with a lid.

The reason why the toilet flushes poorly can be: the sealing ring is leaking and rotten, a large number of stains have been hoarded, and the water level of the inlet valve is relatively low.

It is possible that the sealing ring is leaking, if this happens, we only need to turn off the water valve, so that it can not supply water to the toilet, and then we flush all the water in the toilet bowl and open the water valve again, and we can solve this problem.

A large number of stains have accumulated in the toilet pipes, which makes the water flow slow when we flush, and we only need to clean or replace the toilet pipes.

Since the water level of the inlet valve is relatively low, if this is the case, we need to remove the inlet valve, and then adjust its height slightly higher, and then install it, at this time we use the toilet again, and the flushing force will become larger.

How to use the toilet properly

1. Develop the habit of closing the toilet lid when flushingThe instantaneous cyclone in the toilet bowl can carry germs or microorganisms to a height of 6 meters in the air, and it will float in the air for several hours, so as to fall on the walls and daily necessities, which will breed bacteria.

2. Clean up the dirt in time. The dirt in the toilet must be cleaned up in time, the toilet is easy to be contaminated with some urine stains, feces and other dirt, if there is still a residue after flushing, you must use a toilet brush to clean the feeling in time, otherwise it is easy to form macular stains.

3. Choose a paper basket with a lidThere is often a paper basket next to the toilet, which is used to store the paper that has been used, if the paper basket is not cleaned frequently, it will breed bacteria for a long time, and the bacteria will then spread in the air, which will affect the air quality of the entire bathroom, so choose a paper basket with a lid.

Solutions to toilet flush weakness: Check and adjust the length of the toilet flush key lever, check the sealing flange, and clean the toilet drain line thoroughly.

1. Check and adjust the length of the toilet flush key and lever

When the toilet flush is weak, we can first check the length of the toilet flush button lever. Lift the toilet tank lid and place it upside down, adjusting the two pressure levers separately. Generally, clockwise twisting is shorter, and the amount of water will be smaller, and counterclockwise twisting is longer, so that the water output of the toilet will be larger.

Adjust the spine to the appropriate position, and tighten the nut to fix the pressure rod.

2. Check the sealing flange

For the siphon toilet flushing weakness, it is necessary to check the sealing flange at the sewage outlet, it is generally a rubber flexible sealing ring, the toilet can be seen only when it is removed, if it is aging or the installation is not in place, then directly replace a new one, and install the toilet well, no air leakage, you can solve the situation of weak drainage.

3. Clean the toilet drain thoroughly

You can avoid using special detergents, rinse many times, or use special tools to clean, in short, the inner wall of the toilet drain pipe should be smooth, no scale and dirt are attached, and the pipeline is unblocked, so that the water flow will be very smooth, and there will be no weak flushing.

How the flush toilet works

Pressing the button pulls the chain on the inside of the toilet, so you can open the flush valve. Then you will find that there is a large amount of water in the tank flushed into the toilet, so that it will be flushed, and the flush valve will return to its original position.

The impulse of the water will activate the siphon in the urinal, which will suck the dirt from the urinal into the drain. At the same time, the water level in the tank will drop, and the float will also drop. The lowered float opens the water valve.

The water flows through the water supply valve, which fills the tank and urinal. When the tank is filled with water, the float will float up, and when the float reaches a certain height, the water supply valve will close. If the toilet is faulty and the water supply valve cannot be closed, the overflow pipe prevents the water in the tank from overflowing.