How to connect the 160P C pipe internally?

There are two construction methods.

Generally, PVC drainage pipes can be connected by adhesive. First of all, use a fine-toothed saw and a cutter to cut the PVC drainage pipe according to the size. Remove burrs and burrs from the fracture and chamfer.

Wipe the surface of the socket with a dry cloth with dust, water, and oil. Apply the adhesive evenly to the socket joint. Insert the socket into the socket and turn it into a quarter turn, leaving it on for at least 10 minutes for the adhesive to cure.

Use a cloth to wipe off any excess adhesive on the outside and allow water to run through it 2 hours after it is attached.

Connected with a hot melter, the hot melter can be fixed with screws to fix a variety of fixed hot melt dies, this die is melted on one side of the pipe fittings, the other side is melted pipe, melted and inserted to wait for it to cool and solidify. The control temperature is generally around 250.

You can consider getting him a built-in tube and fixing it for him, so that it will be fine, or some fusion will be fine.

Socket connection, generally 6 meters long pipe, one end is large and the other end is small, there is a rubber ring in the big end, no glue, directly socket connection in place, automatic sealing, no water leakage.

160 pvc pipe, he has that bayonet, you just need to connect his bayonet according to Sister Feng.

How to connect 160pvc pipe?

This should have a special hot container, which is then connected by hot melting.

Me, if we use the control of people, we have to take over, and the joint has to have a match, and they have a kind of that. Joint.

You can just use the change diagram and then connect it, this is the easiest way, and it's very simple.

PVC pipes are generally not connected by welding. The use of special glue for bonding is more ideal. When bonding, it is necessary to use straight-through, elbow, tee and other pipe fittings as connectors.

Hall 160 PB C D has an accurate connection port above the cable for prompting.

The PVC pipe of the 160 can be connected internally.

How to connect these 160pvc pipes, I think it will be connected according to a correct reception method, and it will be able to be connected without saying anything.

If you want to know how he is connected, I only press the circuit method, it is better to read the instruction manual.

He said that he didn't say it, he had a detailed explanation on it, and it was okay to write it according to himself.

How to connect this with 16pc pipe? You have to go to a professional repair place to check it out and find a professional to help you.

Summary. 1. Use a rubber ring to connect, place a rubber ring at the flaring place, then apply some lubricant on the edge, and finally insert the water pipe into the socket with the rubber ring.

2. Use glue to connect, first check whether the edge of the interface is flat, and then connect the two interfaces of the water pipe and fix it with glue. Pay attention to the glue connection, and make sure that the diameter of the two connecting pipes is the same.

How to connect 50p C pipe with 1 inch 2 pipe.

1. Use a rubber ring to connect, place a rubber ring in the pure place of Yuanchun with flaring, then apply some lubricant on the edge, and finally insert the water pipe into the socket with the rubber ring. 2. Use glue to connect, first check whether the edge of the interface is flat, and then connect the two interfaces of the water pipe and fix it with glue. Pay attention to the glue connection, to make sure that the diameter of the hail fingers of the two connected pipes is the same.

Hope it helps, dear