Dry hanging stone construction process, stone dry hanging process steps

Do the math how much it will cost you to renovate your home

1. When carrying out the dry-hanging stone construction process, it is necessary to measure the pay-off first, and the pay-off must be processed according to the size of the wall area and the concave and convex situation, and some control points can be set up on the upper, lower and middle sides of the wall respectively, and then the horizontal line is pulled out with lead wire, and the transition control of an oblique cutting angle of the adjacent wall surface is done.

2. It is necessary to place the embedded plate, in the process of placing the embedded plate, the keel is mainly installed as the main material, and the fixed point of the keel must meet the relevant design requirements, and then the construction is carried out according to the relevant design drawings. You can first weld the keel on the embedded parts, fix the pull-through line, check the flatness, and then weld after complete correction to avoid unstable phenomena.

3, and then install the secondary keel, for the installation of the secondary keel must also be designed according to the relevant drawings, before the installation, must be based on the construction drawings to develop the steel pendant, and with a drill bit, drill holes, and then carry out the welding between the main keel and the secondary keel, the welding must be firm, to avoid falling off.

4. After all these matters are done, you can coat a layer of anti-rust paint on the surface, after the anti-rust paint is painted, you can do the concealed acceptance treatment, and then apply for work acceptance to the relevant departments in time.

Enter the area and get the decoration for free**].

Dry-hung stoneThe construction process is described as follows:

The first step is to measure the pay-off.

When measuring the pay-off, according to the size of the wall area and the concave and convex situation, some control points should be set on the upper and lower sides of each wall and the middle side of the side, and then the horizontal line should be pulled out with lead wire, and the turning control of an oblique cut angle of the adjacent wall should be done.

The second step is to place the embedded plate. In the process of placing the embedded slabs, to the main keel.

It is installed for the main material, and the fixing of the main keel should meet the design requirements, according to the drawings, and the main keel is welded in the embedded parts first.

, then fix the wire firmly, check the flatness, and then weld after correction.

The third step is to install the secondary keel. It also needs to be carried out in accordance with the design drawings, and it is necessary to work out the steel pendant and drill holes according to the construction drawings, and then weld the main keel and the secondary keel together.

The fourth step, after these are done, should be shown to apply a layer of anti-rust paint, and do a good job of concealed acceptance after coating.

After completing the above process, you need to go to the relevant departments to apply for qualified acceptance.

The villa master provides you with local building policies, building drawings, and villa design drawings;

Villa appearance renderings service, thousands of popular drawings for you to choose.

Villa Master.

1. Construction preparation, on-site in accordance with the design drawings, measurement and pay-off, in accordance with the measurement results to deepen the drawing of the drawings, start stone typesetting, order numbering, confirm the order table, prepare stone processing and basic processing, check the verticality and flatness of the basic wall, and chisel and trim if necessary.

2. Pay-off elastic line, according to the design requirements, stake out on the ground and pop up the skeleton, the finishing contour line and the horizontal reference line of the wall, and place the vertical channel steel line of each part.

3. Buried plate installation, according to the place of the vertical keel channel steel, confirm the position of the buried plate, and stabilize the buried plate with expansion bolts on the concrete beam and wall.

The ** of dry hanging stone per square meter should be about 50 yuan, and some will be about 70 yuan, depending on the quality of the product. There are still many advantages of dry-hanging stone, such as the texture is relatively hard, and the hard rolling degree is relatively high, so it can often withstand a certain impact or withstand a certain pressure, and the use of this material can also effectively avoid the problem of hollowing or cracking of the plate, which can improve the overall durability and safety. After use, it can also avoid whitening or discoloration, and can keep the wall clean for a long time.

1. Advantages, dry hanging stone has high strength, hard quality, can resist a certain impact force, can improve the safety and durability of the building, and can also ensure that the whole wall is clean and beautiful.

2. Disadvantages, the construction technology of dry-hung stone is more complex, the required manpower, material resources are more, and the construction cost is high, because the dry-hung stone is hung on the outer wall of the building, which will be affected by the gravity of the stone itself, and it is easy to fall off.

Precautions for the construction of dry hanging big brother stone:

The dry-hung stone structure is inspected and accepted, whether the pre-inspection procedures have been handled, and whether the construction of water and electricity and facility installation has been completed.

The above is the general process of dry-hanging stone construction, I hope to let you better understand the construction process, or go to the site to see more when decorating. Messy stoves.

Nowadays, many owners like to use it when decorating exterior wallsStone dry hangingmethod of wall decoration, which is both beautiful and saves money. 100 is more common in high-end small judgment areas and villas, and stone dry-hung building exterior walls are a more commonly used structure at present. What are the process steps of stone dry hanging and the precautions for stone dry hanging construction?

1. What are the process steps of stone dry hanging?

1. Measure and determine the position, and use an electric drill to punch holes in the wall.

2. Prepare four expansion screws.

3. Use a hammer to hammer the expansion screw into the punched hole.

4. Use a wrench to install the expanded screws.

5. Check whether the fastener is completely fixed.

6. The distance of the expansion screw should be determined by the size of the marble.

7. Lean the marble against the fastener, and you can set the slotting position.

8. Slotting in the position.

9. After opening the groove, apply a large amount of marble glue and polish it.

11. Fix the marble after adjusting the level.

12. The finished product is completed, and the effect is not bad.

Second, what are the precautions for the construction of stone dry hanging.

1. Before construction, it must be paid off in accordance with the requirements, and the pay-off must be accurate.

2. To select the embedded parts first, if the wall is a shear wall, you can directly use expansion bolts to add embedded iron, and then fix, if it is an aerated concrete block wall, you must use wall screws to fix.

3. When installing the angle steel, it must conform to the size of the stone typesetting, and there must be no mistakes.

4. When choosing dry pendants, we must pay special attention to the length and quality, and the length and quality must be controlled.

5. At present, the stone on the market in China is not very standard, and the thickness is not enough, so special attention should be paid to the depth of slotting.

Third, what are the advantages of stone dry hanging?

1. Compared with the traditional wet operation, the dry hanging method of the backbolt stone curtain wall eliminates the process of grouting and effectively shortens the construction period, and also reduces the weight of the building, so as to effectively improve its seismic performance. In addition, the most important thing is that this process can effectively prevent the penetration and pollution of saline-alkali pigments on the stone during the grouting process, and can improve the decorative quality and aesthetic effect.

2. The traditional process is to use grouting as the main point of connection, but it will cause the phenomenon of expansion and contraction deformation of the decorative board due to the seasonal outdoor temperature difference, and may even fall off, which poses a threat to our personal safety. Compared with the first, the construction process of dry-hanging stone can effectively prevent the occurrence of falling off accidents.

3. The installation process of back-bolt dry-hung stone curtain wall can be used together with the installation process of glass curtain wall and metal decorative plate, and many large-scale public buildings in China are basically using dry-hanging stone technology.

About the process steps of stone dry hanging and what are the precautions for the construction of stone dry hanging, the knowledge of phase excavation is introduced here, we should buy stone to the regular channel to buy, so that the quality of the purchased stone is ***, want to know more about the wonderful information of home decoration, please continue to pay attention.

1. According to the design requirements, measure and determine the position, and use an electric drill to punch holes in the wall. 2. Prepare four expansion screws, and the size of the expansion screws should be determined according to the weight of the marble. When correctly installed in a single M6 8 10 12 expansion bolt in concrete, its static force is 120 170 320 510 kg.

3. Use a hammer to hammer the expansion screw into the hole that was measured and laid before, and adjust it to the same horizontal plane. 4. Use a wrench to install the fasteners on the expanded screws. 5. Check whether the fastener is completely fixed.

6. Make an incision at the corresponding position on the back of the marble. 7. First apply marble glue to the incision position, adjust the flatness and verticality and then fix it temporarily, and use AB dry hanging glue to fix it in other positions, no less than 4 fixed points, which should be fixed and installed from bottom to top. Hopefully, this service will help you <>

<> you can click on my avatar to follow me, and if you have any questions in the future, you can consult me again, and look forward to serving you again. Wishing you well; Have a good life and all the best! If you are satisfied with my service, please give a thumbs up<>

Once again, I wish you all the best! Peace and joy.

Dry-hanging stone craft practices.

2. Prepare four expansion screws, and the size of the expansion screws should be determined according to the weight of the marble. When correctly installed in a single M6 8 10 12 expansion bolt in concrete, its static force is 120 170 320 510 kg. 3. Use a hammer to hammer the expansion screw into the hole that was measured and laid before, and adjust it to the same horizontal plane.

4. Use a wrench to install the fasteners on the expanded screws. 5. Check whether the fastener is completely fixed. 6. Make an incision at the corresponding position on the back of the marble.

7. First apply marble glue to the incut position, adjust the flatness and verticality and then fix it temporarily, and use AB dry hanging glue to fix it in other positions, no less than 4 fixed points, and the installation should be fixed from bottom to top. I hope this service can help you <>

<> you can click on my avatar to follow me, and if you have any questions in the future, you can consult me again, and look forward to serving you again. Wishing you well; Have a good life and all the best! If you are satisfied with my service, please give a thumbs up<>

Once again, I wish you all the best! Peace and joy.

Kiss you and see if it solves your problem?