What does it mean to hang on stone? What is the difference between stone point hanging and dry hangi

Stone dry hanging refers to the use of cement nails and iron wire or copper wire, in the back or side of the stone hole, with iron wire or copper wire to hang the stone, and to the back of the stone grouting construction process called dry hanging. The point hanging is not to make a steel skeleton on the original structure wall, but to use a corner code as a support, and the stainless steel pendant used to fix the stone is directly installed on the corner code. The difference between point hanging and dry hanging is:

There is no need to punch holes in the stone, and the dry hanging should be made on the back and side of the stone. Point hanging is to use corner code as support, dry hanging is to use iron wire or (copper wire) to hang the stone. The point hanging method can be done when the original structure is a concrete wall and the space requirements are limited, and there are no relevant requirements for dry hanging.

The so-called stone point hanging is not to make a steel skeleton on the original structure wall, only use a corner code as a support, and the stainless steel pendant used to fix the stone is directly installed on the corner code. This practice can be done in the case that the original structure is a concrete wall and the space requirements are limited, but it needs to be designed and Party A.

Agree. It is a construction process on the building.

It is similar to the point hanging method by a kind of called false dry hanging, false dry hanging is generally more indoors, and the normal process practice of dry hanging should be embedded parts.

Rear embedded parts), installation of vertical keel, installation of horizontal keel, hanging stone, glue sealing, and the practice of false dry hanging has only vertical keel, some only horizontal keel, the appearance of this situation is divided into three kinds, the first is that the drawings are designed in this way, that is, the relative cost saving, shrinking into living space; secondly, in the case that Party A requires the reduction of the living space, it can also be done with the consent of the design; The third point is that the construction party cut corners when Party A and the designer do not understand the construction.

Stone point hanging, that is, no steel skeleton is made on the original structure wall, only a corner code is used as a support, and the stainless steel pendant used to fix the stone is directly installed on the corner code.

This practice can be done when the original structure is a concrete wall and the space requirements are limited, but it must be agreed by the design and Party A.

Stone point hanging is to make expansion screws on the wall, and then use structural adhesive and stone-specific AB glue to glue the stone to the expansion screws.

There is no difference, but the statements are different, because there are only a few points for dry hanging, and some say that hanging is like this.

Decoration is unfamiliar to most people, so the various projects are also very nerve-wracking, among which what is the difference between stone hangers and Jianjielin, let's find out. The difference between stone drip and dry rags. Hanging stone point, stone hanging is originally not to make a steel frame on the structural wall, only with an angle ** support, fixed tin with stainless steel pendant directly installed on the angle **.

This method is originally a wall, and it can be done with limited space requirements, but it needs to be agreed by the designer and A.

Stone fake dry hanging, fake dry rack is generally more indoors. The normal engineering practice of the dry frame has embedded parts, installation keel, transverse keel installation, hanging stone, adhesive sealing, and some of the false dry frame only have the keel, and some only have the crossbar, which is divided into. First of all, the drawings are designed in such a way that this is the relative cost.

If A asks for a reduction in living space, it can be agreed by design. The third point is that the construction party will reduce a tribute if Party A and the designer do not understand the construction.

Stone drying hanging, stone drying method refers to a higher cost than the traditional wet paste method. Large loss of space. The stone drying method is much higher than the traditional wet hanging method in terms of engineering cost.

In terms of construction technology, it is more advanced than the wet suspension method, and the construction quality is also more guaranteed than the wet suspension method. However, the living space occupied by the Shishi drying method is much larger than that of the wet hanging method. Smaller indoor space from the original limited.

Clickers and fake hangers put aside the cost of the stone itself, about a square meter or so. <>

The cost of the stone is the cost of the base skeleton, which depends on the size of the stone after the plate and the spacing and material model of the design skeleton. Please explain. The cost other than the stone only needs to calculate the cost of the pendant, the angle **, the embedded parts, the fake dry wine is occupied, the cost of increasing the steel keel is enough, 2, 25 floors of high-rise buildings, the lower 2 floors are podiums, the outer walls of the podium are occupied with granite, and the upper ones are covered with exterior tiles.

Then windows of the same size, for example, are 1200*1500. When I arrived at the podium, the stone was dry, and there was no 1200*1500 at the entrance of the cave. If it is the same façade effect, the window lines on the lower 2 floors are not the same as above.

The first difference is that this point hanging does not need to punch holes in the stone, but the dry hanging needs to be punched on the back and side of the stone. The second difference is that the point hanging is supported by the corner code, while the dry hanging is to hang the iron wire on the stone.

These two practices are not the same, and at the same time they will be very different, and there are many differences in terms of structure, and at the same time, the construction principles between the two are also different, and there is a great difference in essence between the two.

The stone hanging is supported by a corner code. There is no need to punch holes in the back of the stone, and the dry hanging of the stone needs to be punched in the back of the stone. The space limit for hanging is relatively large.

The opening position is different, the support method is different, the budget is different, the cost is different, and the process is different.

Marble hanging means that the marble countertop is extended closer to the body, so that when the countertop is usually operated, the water on it will not flow to the cabinet, and there will be no danger of corrosion. Generally, I set the hanging according to the length of the surface of the table, usually like quartz stone hanging 3 cm, plus the thickness of the table itself, that is, if the table is about 3 meters long (I am talking about a single side), it is more appropriate, if the table is 5 meters long, then the lower hanging will be 4 cm, adding up to 5 cm.

Marble:Marble (English: marble) originally refers to the white limestone with black patterns produced in Dali, Yunnan Province, and the section can form a natural ink landscape painting.

Later, the name marble gradually developed to refer to all limestone with various colors and patterns, which was used as a building decoration material. White marble is generally referred to as white marble, but white marble for Western statues is also called marble.

Summary. Dry hanging refers to the presence of channel steel.

It is also known as a vertical keel.

The point hangs without the erection keel.

That is, channel steel, there is only one layer of angle steel (cross keel).

**。The difference between our company's construction site is about 100 yuan square.

Material fees are not included in the dry hanging.

If you only count the labor, it is 45 yuan square.

Click. It's not clear.

I'm talking about large-scale **.

Shanghai's**.

** of the curtain wall.

The indoor ** is not the same.

Electric hanging basket for dry hanging stone tools.

What is the point hanging of stone, and what is the difference between dry hanging?

Dry hanging refers to the inclusion of channel steel, which is also the so-called vertical keel point hanging, omitting the vertical keel, that is, channel steel, and only one layer of angle steel (horizontal keel). **The difference between my company's construction site is about 100 yuan, and the square dry hanging does not include the material cost, and only the manual is 45 yuan.

Hello, I found on the Internet that the dotted tiles are hung, the finished surface only needs 30 cm, and the dots do not need to be grooved on the tiles, so how to fix the tiles with the metal pendants?

In addition, whether it is necessary to fill cement mortar on the point hanging.

There is also what it means that dry-hung stone is fixed with metal mesh.

Can metal mesh hold stone.

Dry hanging method: This method uses metal pendants to hang the facing stone directly on the wall or empty on the steel frame, without the need for grouting. Cement mortar method: The cement mortar is used as the binder, and then the tiles are pasted on the cement mortar in order for extrusion.

How to fix the dot-hung tiles with metal pendants, does not need to be slotted?

No cross-section, dry hanging bricks are. In the original wall inflatable drill hole, expand the screw, weld 5 cm angle iron on the screw, (vertical) and then weld the pendant (4 points of the brick) on the angle iron, and put the corrugated brick on the pendant with marble glue and back plate to coat the pendant. Dry-hung separating stones, corrugated bricks:

And stone.

Stone hanging sticker is a dry hanging stone, first supported by a steel frame, and anchored with a stone dry pendant can be used Method:

1. Stone dry bonding construction process Dust the stone and the wall to be bonded and keep it dry. Apply the prepared glue evenly to the four corners of the stone, and it is recommended that each corner is 60*60*3mm. In order to facilitate the construction, the middle part can be added with marble glue and other fast-curing glue to assist the construction.

Align the pasting part, so that the glue is just extruded from the edge of the stone. Do not disturb the stone within 12 hours in summer and 24 hours in winter after pasting.

2. Stone dry hanging construction process Groove cleaning and pendant preparation: blow clean with compressed air until there is no dust in the tank and keep it dry for later use. Remove rust, oil and dust from the pendant.

Adhesive preparation: The dry-hanging structural adhesive is a and B two-component, take out the same weight of glue (1:1), and then fully stir evenly (the color is the same), and it can be used.

3. It is recommended that the glue should be mixed with machinery, and the glue should be used now, and the amount of glue should not be greater than 3 kg each time. Glue filling: You can use a greasy knife to feed glue into the groove, and the glue filling amount should ensure that there is a little rubber overflow around the periphery after inserting the pendant.

If the outer surface of the stone is accidentally glued, it should be wiped clean with a cotton cloth dipped in toluene or acetone within 20 minutes. Curing and maintenance: within 12 hours in summer and 24 hours in winter after pasting, it is not suitable to disturb the pendant and stone.

The stone hanging sticker should be a dry hanging stone, first supported by a steel frame, and anchored with a stone dry pendant.