To decorate an old house, is it better to use gypsum powder or cement to fill the trunking?

It is best to use this gypsum powder to decorate the old house, gypsum powder is very easy to use, and the decoration does not have too much smell, it looks particularly spacious and bright after decoration, and it can also be filled with cement, which is also relatively good, depending on what kind of choice you choose.

Good with plaster powder. Before using gypsum powder, cement mortar should be used to fill the trunking first, no more than three centimeters is the depth of the trunking and curing for a period of time, and then use gypsum to smooth and then scrape putty to polish and paint.

It is recommended to use cement a little better. Gypsum powder is afraid of instability. Cracks may appear in the later years. Affect the aesthetics.

Most of the old houses are brick and concrete structures, and some of them may be insulated. Due to the long service life, the wall surface of the building is seriously not on a horizontal line due to normal settlement or other reasons, and the horizontal difference of the façade of some walls reaches more than one centimeter. This is fairly common.

To deal with such things, the average person is to use gypsum powder to level and then scrape putty, and the results have proved that the effect is also average, my suggestion is to use the keel and gypsum board leveling method on the basis of the original wall. Once!!

Oh, no, the general original gypsum powder, if there are no bubbles and peeling, you can directly scrape putty on it and brush latex paint.

If the wall is not good, the surface layer will be coated with cement mortar before the second batch of walls, in order to facilitate the putty and the wall to stick firmly.

Batch three times putty, polish and level, brush latex paint, latex paint is generally twice, if you can't cover the bottom layer, you can brush it three times.

It's definitely the latter.

Although the former looks convenient, it is difficult to nail and easy to fall off. Generally, instead of nails, line cards are used, which will occupy space and affect wiring.

Just nail it with cement! The power of lighting wires, air conditioning wires, and kitchen appliance wires is not too large, not as thick as industrial cables, and it is enough to use a wire duct! Just nail the trunking to the wall with cement nails!

Laminate flooring must be leveled, because laminate flooring is directly laid on the ground and depends on the ground, so it must be leveled.

Generally do not level the solid wood floor, because the general solid wood floor needs to nail the wooden flute under the floor, and the master carpenter will adjust the flatness when installing the wooden flute. Solid wood flooring is installed on top.

Floor tiles do not need to be leveled, because when laying floor tiles, thicker (4 5 cm) cement mortar is directly laid underneath, and the flatness of the floor tiles can be adjusted directly.

Floor tiles are really not cheap (compared to laminate flooring, they are generally cheaper than solid wood flooring). If the ordinary floor tile is 70 yuan a piece (80 80cm), a square is about a piece, about 100 yuan a little more, plus cement sand, material freight (7 yuan per square meter) and workers' wages (our salary here is about 13 yuan per square meter), about 20 yuan per square meter, plus the cost of floor tiles 120 yuan, this ** can buy a better brand of composite flooring.

But floor tiles have the benefits of floor tiles, and floors have the advantages of flooring. Let's not talk about it. Decide for yourself.

Be sure to do waterproofing when decorating. It is mainly done in the kitchen, bathroom floor and part of the wall. Generally after laying the water pipes, circuits, painted waterproof materials, waterproof materials have a kind, I don't know very much, I won't introduce, my home decoration is painted to the wall from the ground one meter distance (some people are all painted), after painting, after a day or two of drying, put some water test, see if the water leaks, run downstairs to see if there is water seepage on the ceiling, if there is no problem, you can pave the floor tiles, wall tiles, otherwise do waterproof.

That's great, you can try it.

iy bath t extinguish o s m zp disease s s 04152626172011 8 4 9:33:04

The main reason for the house to find the water in the building is the old house, and the floor slab was built with prefabricated slabs before.

Generally, the method of decoration treatment in this situation is: when leveling, first sweep the original ground with pure cement mortar with a broom, and be sure to master the proportion of moisture. After waiting for the cement mortar to dry every other day, it is leveled.

We must pay attention to several problems when looking for ash, one of them, we must find a few iron plates when composing ash, and the water-cement ratio should be dry and not wet. In this case, the level found is not very good, so use 1:1 cement + medium sand fine ash to find a level.

There will be water seepage is already a problem with the building structure, I hope that under the contact with the property, the quality of the house is 60 years, I believe you have not lived for more than 10 years. This is not a bathroom, not a kitchen, not a balcony, I want us to do waterproofing again, it is really laughing.

Even if you lay a wooden floor, you will wash the floor in the future, and it will leak if it is water accumulation for ......a long time

When renovating the old house, it should not be ignored that it must be waterproof, in line with the principle of being responsible for the downstairs and living in your own way! Although the previous decoration has been waterproof, but the renovation process involves smashing the wall to change water and electricity, and the waterproof time from the first decoration is long, and the performance of waterproof materials will also decline! Affect the downstairs must have a good attitude to solve the problem!

It is recommended to redo the waterproofing.

Prison cell renovation is even more cumbersome than the decoration of the new house, limited by the original pattern of the house type, decoration lectures have been taught, August 13 Hanhua International Hotel, landlord Optimus Prime led everyone to understand the decoration of common sense, the purchase of home decoration materials, good activities, recommended area to learn!

When renovating the cement floor of an old house, you can only deal with the uneven ground and crack the place, and use cement mortar and other building materials to smooth out the uneven place.

First of all, the original cement floor is properly crushed, then the excess residue is removed, and finally a layer of cement is directly spread on top, but the house floor may be raised a little higher.

Cover it directly, fill the old holes first, and then re-cover the new ones.

Do you think it's easy to open a cable slot? 3-4 hundred-dollar stuff, why do you save him? The plumber doesn't care about you, you can't open the line of the trunking yourself, and when the time comes, it can't be smoothed with the wall when it's super high, that's your own problem.

It's better to get the decoration together, otherwise it's very troublesome.

Many owners will have regrets after renovation, mainly because in the process of renovation, everyone often ignores some details, so as to take it lightly, and regret it when it comes to moving in. Today, Brother Pin sorted out the 32 most forgotten details in home decoration, so that everyone can easily control the details in the decoration.

There are five points that can be dealt with.

1. Hydropower renovation "anti-leakage problem."

2. The renovation of old houses solves the problem of cracking and cracking of the wall.

3. The problem of "strong current system" in the hydropower renovation of old houses.

4. "Weak current system problem" in the hydropower renovation of old houses.

5. "Water supply system problem" in the hydropower renovation of old houses.

Painting the wall is the key, the wall of the old house will crack, peeling, so when decorating the wall, we must pay attention to the grassroots treatment, "Beijing Siyu design" after the wall is flattened, will be coated with the interface agent, the interface agent has the effect of moisture-proof, but also can play a role in protecting the latex paint, the next is to scrape putty, putty paste to choose waterproof putty, putty generally to scrape three times, and finally brush latex paint. If you want to paint the walls in color, then apply primer accordingly.

For the old iron pipe water supply, first remove the original pipe, and determine the new shower, wash basin, toilet, washing machine, and vegetable washing basin in the kitchen and bathroom. The location of the water supply. For the replacement of the master control valve, it is necessary to greet the property management company or neighborhood committee in advance, and explain the reason for the water outage to the neighbors in the same building, which will generally be understood by everyone, and then it will be 9 a.m

The main valve is replaced between 30 and 4:00 to avoid peak water consumption periods such as cooking.

First, the walls and floors are meant to be moved.

Second, I don't know what style of toilet you have, the one in the back? Front-row? Lower row? The old houses are all different, so you have to be optimistic, the ones in the back row are not easy to buy now.

Third, I estimate that the old houses are 2.8 meters on the ground, and there is no problem with laying the floor directly, and if you still want to lay floor tiles, it is even more problematic, just knock it and do it again.

Fourth, the floor of the kitchen and bathroom is originally to be waterproof, but if you want to decorate it, it will be done without negotiation.

Fifth, there are two problems that will arise.

1.Because it is an old house, whether the power system is clear, I suggest that you rearrange the wiring and use the air conditioner and ordinary electricity separately.

2.Because it is an old house, most of the water systems are galvanized pipes, and it is estimated that water rust has been produced after long-term use, so I suggest that the waterway be re-drained.

Sixth, I saw that I still didn't write enough and wasn't serious enough, so let's continue to talk about it, 1Pay attention to the power and communication when threading the pipe, and pay attention to not only the straight pipe, but also the elbow and tee. 2.

Water pipes: Pay attention to the pipes that pass through the wall, and use the whole pipe, and do not have interfaces. 3.The old balcony should not just think about wrapping it up, because the old balcony will seep water from the outside to the inside, so it is recommended to use waterproof paint before making other decorations.

4.What does the gas meter of an old house look like, or is it ordinary? If it is to be packed in a cabinet, be careful not to put it directly on the board, as the new card watch will be larger than the old one.

5.Anyway, it is going to be renovated, and it is recommended that you replace the soft water pipe of your air conditioner.

Before renovating an old house, it is necessary to understand the decoration steps clearly:

1.Pre-design --2Main body demolition --3

Hydropower Renovation --4Carpentry --5Tiling --6

Painting the walls --7Kitchen and bathroom ceiling --8Cabinet installation --9

Wooden Door Installation --10Floor installation --11Paving wallpaper --12

Radiator installation --13Switch socket installation --14Luminaire installation --15

Hardware sanitary ware installation --16Curtain rod installation --17Pioneer cleaning --18

Furniture Approach --19Appliance Installation --20Home accessories.

Whether it is large or simple, set a plan, such as 50,000, 100,000, 150,000, 200,000, determine the appropriate price and then find a decoration company for consultation.